iAXBi QH-AKD111 Magnetic Phone Holder For Car User Manual
- June 17, 2024
- iAXBi
Table of Contents
User Manual
Magnetic Phone Holder for Car
Function Introduction:
- Magnetic Wireless Charging
- USB-C Charging Port
- swivel Ball-Head
- support Arm
- Cireular Push-Button
- Rotatable Base
Installation Steps:
- Clean the car dashboard surface.
- Peel off the protective film on the 3M adhesive pad at the bottom of the phone holder.
- Install the 3M adhesive pad on the dashboard surface, then press the base until it released after 15 seconds.
(Note it wil take 72 hours for the 3m adhesive to secure.)
Method of Use
- After connecting the power supply, the charging board enter the standby state.
- Put the phone into the charging area of wireless charger.
- When the interface of the phone shows charging, it means the device is charging.
- Swivel ball-head 360° rotatable, and the angle of the support arm can be freely adjusted
- When press and hold the circular push-button, the base can be rotated 360°
(Note: Do not rotate the base without pressing the base .)
Specifications
Model: QH-AKD111
Input: 18W (9V/2A)
Output: 15W (9V/1.67A)
Material: High-Quality Zinc Alloy
Color: Black
Size: 155 x 57 x 41 mm
Net Weight: 91g
Wide Compatibility
Compatible with all phones that support wireless
charging, such as iPhone, Samsung
Package Contents
1 x Magnetic phone holder
1 x Alcohol Wipe
2x Metal Plates
1 x L Spanner
1 x 3V Adhesive Pad
1 x USB-A to USB-C Cable (1m)
1 x User Manual
Precautions for Use
Please pay attention to the following issues, otherwise it may cause abnormal charging, high charging temperature intermittent charging, or even not charging.
- Compatible with devices such as Apple and Samsung (Devices must support wireless charging standards)
- Please put the phone at the center of charge area.
- The charging distance is 2-8 mm,please don’t wear protective case which is over 3mm thick.
- Avoid high ambient temperature optimal temperature is 82-86 °F.
- DO NOT plug and unplug electrical appliances with wet hands.
- Make sure to disconnect the product from power before cleaning.
- Put it at the place that children can’t reach to avoid unnecessary accidents.
Warranty Statement
The warranty period of this product is 12 months.
From the date of purchase, you’ll enjoy free warranty within the warranty
period with valid documents.
Note:
The following conditions are not covered by the warranty:
- Unable to provide formal purchase certificate.
- Damage caused by man-made o irresistible factors.
- Accidental damage. (misuse, abuse, or neglect)
- Improper repair or alteration by unauthorized persons.
- Operation without following the manual’s instructions.