RODOT B066A-018-433M Remote Control Instruction Manual
- June 25, 2024
- RODOT
Table of Contents
RODOT B066A-018-433M Remote Control
Product Information
Specifications
- Frequency: 433MHz
- Remote Control Type: Handheld
- Compatibility: Universal
- Power Source: CR2032 Battery
- Range: Up to 100 meters
Product Usage Instructions
1. Battery Installation
Open the battery compartment on the back of the remote control and insert a CR2032 battery following the correct polarity.
2. Pairing with Device
Refer to the device’s manual on how to pair the remote control. \Typically, you would need to press a specific combination of buttons.
3. Operating the Remote Control
Point the remote control towards the device you want to operate and press the corresponding buttons for desired functions.
4. Range Adjustment
If the remote control is not working within the specified range,try moving closer to the device or replacing the battery.
Frequently Asked Questions
- Q: How do I change the battery?
- A: To change the battery, open the battery compartment on the back of the remote control and replace the CR2032 battery with a new one.
- Q: What should I do if the remote control is not working?
- A: Check the battery, and ensure it is properly inserted with the correct polarity. Also, verify if the remote control is within the operating range of the device.
Pictures of objects
Parameters
- Product Model: B066A-018-433M
- Operating voltage: DC3V (one 2032 button battery)
- Operating current: less than 20mA when transmitting
- Operating frequency: 433±1MHz
- Operating Temperature:-30℃～70℃
- operation life:>10000times
- Standby current: less than 1μA
- Size: 61.5mm29mm12mm
- Remote control response time:<5ms
Instructions for operation
- Press the ON button, the indicator light is red, send a signal, open the machine, release to stop sending
- Press the OFF key, the indicator light is red, send a signal, close the machine, release to stop sending.
- When the emission indicator light is slightly bright, it indicates that the battery voltage is low, and it is necessary to replace a new battery.
Application production scene
- wireless mouse.
- remote control toys.
- Smart furniture., etc.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>