Kyla KSEN-231 Smoke Detector User Guide

June 1, 2024
Kyla

Kyla KSEN-231 Smoke Detector User Guide

PRODUCT DESCRIPTION

The Kyla Smoke Detector is a stand-alone smoke detector with an in-built 3.0V 1650mAh Lithium battery that can last for 10 years. It utilizes a photoelectric sensor that allows it to be more sensitive to detecting slow smoldering fires which generates thick black smoke and little heat.

Button
Product Description

ACTION REMARKS

Press Power button and hush button at the same time (red LED flash rapidly with alarm)| Test Mode
Red LED flash every 10 seconds (9min-exit)| Hush Button

PLACEMENT TIPS

Placement Tips

NOTE

  • Smoke detector should be installed on ceiling along an escape route (e.g living room)
  • To prevent false alarm, avoid installing in kitchens and bathrooms.
  • For multi-storey homes, minimum 1 smoke detector per store is recommended.
  • Remove “silicon protection cover” before use.

INSTALLATION GUIDE

Ceiling mount with screw.
Installation
Rotate clockwise until click

Press the hush button for 0.5sec, red LED will flash rapidly with alarm.
(If LED does not flash, please remove the main unit and attach to the selling mount bracket again)

LED STATUS INDICATOR

A CTION REMARKS
Red LED flash rapidly with alarm Smoke Warning
Red LED flashed once every 43 seconds and alarm once Low Battery Warning
Green LED flash 3 times every 43 seconds Hysteresis Mode

NOTE

  • To confirm that the detector is operational, perform a regular button test.
  • Should the device fail to operate correctly, please contact us.
  • Should the device indicate a battery fault warning, replace the smoke detector.

PACKING CONTENT

Smoke Detector` x1 Easy Start Guide x1 Warranty Card x1
Bracket x1 Silicon Sleeve x1 Plastic Anchors x2
Screws x2

TECHNICAL SPECIFICATIONS

Model KSEN-231
Power supply 3.0V 1650mAh lithium battery(non-replaceable)
Standby Current ≤10µA
Alarm Current ≤100mA
Sound Level 85 dB(A) at 3 meters
Smoke Sensor Photoelectric Sensor
Dimension ø56.0mm x H50.0mm
Operating Temperature 0 to 45°C
Non-Operating Temperature -25 to 70°C
Operating Humidity 0% to 95% Relative Humidity(non-condensing)
Non-Operating Humidity 0% to 95%
Regulatory Compliance EN 14604:2005

Thank you for using Kyla product! Please keep this Easy Start Guide for future use. For support or help, visit kylaconnect.com

TEN-YEAR LIMITED WARRANTY

The Manufacturer warrants its enclosed smoke detector to be free from defects in materials and workmanship under normal use and service for a period of 2 Years from Date of purchase and 10 Years Battery Warranty. The Manufacturer makes no other express warranty for this smoke detector. No agent, representative, dealer or employee of the company has the authority to increase or alter the obligations or limitations of this Warranty.

The Manufacturer shall not be obligated to repair or replace units which are found to be defective because of damage, unreasonable use, modifications, or alterations occurring after the date of manufacture. In no case shall the Manufacturer be liable for any consequential or incidental damages for breach of this or any other Warranty, expressed or implied.

The warranty is not valid unless the purchaser registers online within 14 days of purchase (with the proof of purchase). Thank you dear customer for purchasing our product! Please register your warranty online at: https://kylaconnect.com/e-warranty

To obtain service under this warranty, please contact Service Center at:
Tel: +65 6594 2288
Address: 31, Ubi Road 1, #01-05, Singapore 408694
Service Hours: Monday to Friday, 9:00am – 5:30pm (Closed on Weekends & Public Holidays)
Email: Support@aztech.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals