Kyla KSFT210ZB Zigbee Button User Guide

June 6, 2024
Kyla

Kyla KSFT210ZB Zigbee Button

Thank you for using Kyla product! Please keep this Easy Start Guide for future use. For support or help, visit kylas.aztech.com
DISCLAIMER
Aztech Technologies Pte Ltd, its holding company and its associated companies (hereinafter referred to collectively as “Aztech”) does not guarantee that adequate warning or protection will be given, and disclaims all warranties and representations, whether expressed, implied or otherwise statutory, concerning the product, including without limitation any warranty of merchantability or fitness for a particular purpose. Aztech shall not be liable in any event for any consequential, indirect, incidental, special, exemplary, punitive or enhanced damages resulting from the use maintenance or operation of the product.
The manufacturer makes no warranty or representation that the product constitutes a fire alarm system or is compliant with any requirements prescribed by any applicable state or laws, codes, regulations and/or other specifications that may be set out by relevant authorities having jurisdiction (collectively referred to as “regulations”). You shall be solely responsible for compliance with all regulations.
To the maximum extent permitted by applicable law, you agree to hold harmless and indemnify, including legal fees,the manufacturer and their personnel against any third-party claims or fines by authorities that arise or are alleged to have arisen as a result of negligent or intentional act or omission by you or breach by you of any the terms herein or any violation of any regulations.

PACKAGE CONTENTS

  • Smart Button x 2
  • CR2032 Battery x2
  • Easy Start Guide
  • Warranty Card
  • Double-sided tape x2

PRODUCT DESCRIPTION
The Smart Button is a multipurpose button that can be programmed to quickly perform the following features with one, two or three presses:

  • Launch automated scenes
  • Control other smart devices
  • Trigger emergency alarm
    The Smart Button also adopts the Zigbee wireless technology for a long-lasting battery life. Paste it on the wall or place it on the table, this chic and portable device blends in anywhere.

PRODUCT OVERVIEW

Smart Button Action Result
Press once. User-defined via app. LEDs blink once.
Press twice. User-defined via app. LEDs blink twice.
Press and hold for 1.5 to 5 seconds. User-defined via app. LEDs rotate for

two cycles.
Press and hold for 5 seconds or more.

Release button press.

| All 3 LEDs will turn on. Enter Pairing Mode.

1 LED blinks rapidly for 30 seconds.

OPERATION GUIDE

Step 1:
Download Kyla App from Google Play/App Store.
Requirement:

  • iOS 12.0 or later
  • Android 5.0 or later

Step 2:
Rotate the back cover counterclockwise to open.

Step 3:
Insert the battery correctly based on the positive and negative terminals of the battery.

Step 4:
Close the back cover and rotate clockwise to lock.

Step 5:
Login to Kyla App, then add “Smart Button” to the device list.

Step 6:
To enter Pairing Mode, press and hold the button for 5 seconds or more then release button press.
This triggers 1 LED to blink rapidly for 30 seconds.
Follow the remaining setup guide on the app.

PERFORMING A RESET
Press the Reset button on the back of the device.

TECHNICAL SPECIFICATIONS

  • Power Supply
    DC 3V

  • Battery Type
    CR2032

  • Operating Temperature
    0–40°C

  • Operating Humidity
    30–80% RH (Non-Condensing)

  • Connectivity
    Zigbee

  • Indicator Lights(s)
    Green LED x 3

  • Communication Distance
    10m to Hub (Indoor)

  • Casing Material
    PC and ABS

  • Certificate(s)
    FCC, CE, IMDA

FCC Statement

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  2. This device may not cause harmful interference.
  3. This device must accept any interference received, including interference that may cause undesired operation.
  4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    NOTE:
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
    This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

© 2019 Aztech Technologies Pte Ltd. All rights reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals