Kyla AZ-N1008P Network Video Recorder User Manual

Kyla AZ-N1008P Network Video Recorder

Thank you

Thank you for using Kyla product! Please keep this Easy Start Guide for future use. For support or help, visit kylaconnect.com

DISCLAIMER

Aztech Technologies Pte Ltd, its holding company and its associated companies (hereinafter referred to collectively as “Aztech”) does not guarantee that adequate warning or protection will be given, and disclaims all warranties and representations, whether expressed, implied or otherwise statutory, concerning the product, including without limitation any warranty of merchantability or fitness for a particular purpose. Aztech shall not be liable in any event for any consequential, indirect, incidental, special, exemplary, punitive or enhanced damages resulting from the use, maintenance or operation of the product.
The manufacturer makes no warranty or representation that the product constitutes a fire alarm system or is compliant with any requirements prescribed by any applicable state or laws, codes, regulations and/or other specifications that may be set out by relevant authorities having jurisdiction (collectively referred to as “regulations”). You shall be solely responsible for compliance with all regulations.
To the maximum extent permitted by applicable law, you agree to hold harmless and indemnify, including legal fees, the manufacturer and their personnel against any third party claims or fines by authorities that arise or are alleged to have arisen as a result of negligent or intentional act or omission by you or breach by you of any the terms herein or any violation of any regulations.

UNPACKING

Perform the following steps to unpack the AZ-N1008P (hereinafter referred to as “device”):

1. Inspect the package to make sure that it has not been damaged. If you find damage item, contact the local authorized Aztech Partner / Agent / Reseller.
2. Take all items out of the package and check whether any item is in defect condition. If you find damage item, contact the local authorized Aztech Partner / Agent / Reseller.

PACKAGE CONTENTS

SAFETY INSTRUCTION

1. ESD (Electrostatic Discharge)
   To reduce the effects of ESD, you should observe the following guidelines.

   • Wear a grounding wrist strap. If a grounding wrist strap is unavailable, touch an unpainted metal surface on the appliance chassis periodically to neutralize any static charge.
   • Keep components in their antistatic packaging until they are installed.
   • Avoid wearing clothing made of wool or synthetic materials.
   • Ensure device is well grounded.
   • Keep the area around the device clean, free of clutter, and well ventilated.
   • Ensure the operating temperature and the relative humidity within the range complying with the device.

2. EMI (Electromagnetic Interference)
   To shield EMI, you should observe the following guidelines:

   • Keep the ground system of the device away from that of the power supply system or lightning protection system.
   • Place the device away from high-frequency devices, such as radio or radar stations.
   • When necessary, deploy EMI shielding devices.

3. Lightning Protection
   To prevent the risk of lightning, you are advised to ensure the following:

   • The device is well grounded.
   • Based on onsite conditions, install lightning arrestors

SPCIFICATION

IEEE802.3af/ a t
HOD Bay| 1x 3.5″ HOD SATA Barro (Support up to 10TB) Recommended to use surveil once Grade to optimal long recording storage.
USB| 2 X USB2.0
Audio / Video| 1x VGA up to 1080P, 1x HDMI up to 4K
1x HDMI, l x 3.5mm (Headphone or speaker)
D i mension (w x D x H)| 302 mm x 242 mm x 50 mm
Weight| 0.8 kg (Exclude HOD)
Power Consumption| Max. 70 w (with 8 PoE power feed in g, exclude HDD) DC 48 V, 2.0A
Power| DC 48 V, 2.0A
Temperature| Operating temperature:0°C – +55°C
Hum i dity| Operating humidity: 10% – 90% (non – condensing)

NOTICE

The information in this document is subject to change without Note. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Aztech is not responsible for printing or clerical errors.

PREVENTIVE AND CAUTIONARY TIPS

1. Device Cleanliness

   • You must install the device in an environment as free from dust and foreign conductive material (i.e., metal flakes from construction activities) as is possible.
   • Clean the area to prevent accumulation of dirt or dust (i.e., spider web)

2. Device Care

   • Do not place heavy objects on the device or block the air vent holes (if any).
   • Do not install at the area near to water or fire hazard area.
   • Switch off the device if you are not using it for a long period of time.
   • Regularly check the Internet connection status of the device.

3. Battery Replacement
   Type| CR2032
   ---|---
   Battery Life| Refer to the manufacturer’s instructions or contact the manufacturer for details
   No Charge| When the battery loses its charge, the CMOS data (such as the system time and BIOS settings) may be incorrect or even lost.
   Replacement|

4. Prepare a new battery.

5. Switch off the device and disconnect it from a power outlet.

6. Wear a grounding wrist strap to replace the old battery with the new one. During replacement, do not mix up the anode and cathode.
   Recommended to contact the local authorized Aztech Partner / Agent / Reseller for battery replacement
   Disposal| Dispose of used batteries according to local laws or regulations

CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.

DEVICE DESCRIPTION

INSTALLING AN HDD

Note: You are advised to install an HDD before using the device. If you do not install an HDD:

• You cannot use the recording function.
• When the device starts operating and detects that no HDD is installed, the beeper will go off and an alarm will be generated. To clear the alarm, on the OSD of the device, choose Siren logo (top right) – Clear Alarm.

1. Prepare a HDD.
   You are advised to use a recommended HDD. Contact your system administrator for the list of recommended HDDs.
   Recommended HDD Grade: minimum surveillance grade
   Recommended HDD Brand: Toshiba, Seagate and Western Digital
   Supported Capacity: Up to 10TB

2. Loosen the seven screws according to the instructions in the drawing, and open the NVR bottom cover.
   

3. Place the hard disk onto the connector from the right. Push it towards the left until it is fixed into position.
   

4. Put the NVR bottom cover back in place and secure the hard disk with screws according to the drawing below.
   

5. Connect the data line and power line respectively.
   

6. Put the NVR bottom cover back in place and secure the cover with 7 screws according to the drawing below.
   

References

• Shop KYLA - Smart Home Products | WiFi Plug | Smart Station | Smart Ceiling Light

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>