Kyla NVR1216-16P Network Video Recorder 16 Channels User Manual
- June 1, 2024
- Kyla
Table of Contents
Kyla NVR1216-16P Network Video Recorder 16 Channels
Product Information
Specifications:
- Model: Kyla-NVR1216-16P
- Manufacturer: Aztech Technologies Pte Ltd
- Package Contents:
- NVR x1
- Wired Mouse x1
- Hard Drive Bracket x4
- User Manual x1
- Power Cable x1
- Angle Bracket x2
- Warranty Card x1
- Screws x16
Product Usage Instructions
Unpacking:
- Inspect the package for damage. If any damage is found, contact the local authorized Aztech Partner/Agent/Reseller.
- Take out all items from the package and check for defects. Contact the authorized Aztech Partner/Agent/Reseller if any item is damaged.
Safety Instructions:
- ESD (Electrostatic Discharge)
- Wear a grounding wrist strap or touch an unpainted metal surface periodically to neutralize static charge.
- Keep components in antistatic packaging until installation.
- Avoid wearing wool or synthetic clothing.
- Ensure the device is well grounded and keep the area clean, clutter-free, and well-ventilated.
- Maintain operating temperature and relative humidity within device range.
- EMI (Electromagnetic Interference)
- Keep the ground system of the device separate from power supply or lightning protection systems.
- Avoid placing the device near high-frequency devices like radio or radar stations.
- Use EMI shielding devices when necessary.
- Lightning Protection
- Follow guidelines to prevent the risk of lightning.
FAQ
- Q: Where can I get support for Kyla products?
- A: For support or help, visit kylaconnect.com or contact your local authorized Aztech Partner/Agent/Reseller.
- Q: What should I do if I find a damaged item in the package?
- A: Contact the local authorized Aztech Partner/Agent/Reseller if you find any damaged items in the package for further assistance.
Product Overview
Thank you for using Kyla’s product! Please keep this User Manual for future use. For support or help, visit kylaconnect.com
DISCLAIMER
Aztech Technologies Pte Ltd, its holding company and its associated companies (hereinafter referred to collectively as “Aztech”) do not guarantee that adequate warning or protection will be given, and disclaim all warranties and representations, whether expressed, implied or otherwise statutory, concerning the product, including without limitation any warranty of merchantability or fitness for a particular purpose. Aztech shall not be liable in any event for any consequential, indirect, incidental, special, exemplary, punitive or enhanced damages resulting from the use, maintenance or operation of the product. The manufacturer makes no warranty or representation that the product is compliant with any requirements prescribed by any applicable state or laws, codes, regulations and/or other specifications that may be set out by relevant authorities having jurisdiction (collectively referred to as “regulations”). You shall be solely responsible for compliance with all regulations. To the maximum extent permitted by applicable law, you agree to hold harmless and indemnify, including legal fees, the manufacturer and their personnel against any third-party claims or fines by authorities that arise or are alleged to have arisen as a result of negligent or intentional act or omission by you or breach by you of any the terms herein or any violation of any regulations.
UNPACKING
Perform the following steps to unpack the Kyla-NVR1216-16P (hereinafter referred to as “device”):
- Inspect the package to make sure that it has not been damaged. If you find a damaged item, contact the local authorized Aztech Partner / Agent / Reseller.
- Take all items out of the package and check whether any item is in defective condition. If you find a damaged item, contact the local authorized Aztech Partner / Agent / Reseller.
PACKAGE CONTENTS
NVR x1 | User Manual x1 | Warranty Card x1 |
---|---|---|
Wired Mouse x1 | Power Cable x1 | Screws x16 |
Hard Drive Bracket x4 | Angle Bracket x2 |
SAFETY INSTRUCTION
ESD (Electrostatic Discharge)
To reduce the effects of ESD, you should observe the following guidelines.
- Wear a grounding wrist strap. If a grounding wrist strap is unavailable, touch an unpainted metal surface on the appliance chassis periodically to neutralize any static charge.
- Keep components in their antistatic packaging until they are installed.
- Avoid wearing clothing made of wool or synthetic materials.
- Ensure the device is well grounded.
- Keep the area around the device clean, free of clutter, and well-ventilated.
- Ensure the operating temperature and the relative humidity within the range complying with the device.
EMI (Electromagnetic Interference)
To shield EMI, you should observe the following guidelines:
- Keep the ground system of the device away from that of the power supply system or lightning protection system.
- Place the device away from high-frequency devices, such as radio or radar stations.
- When necessary, deploy EMI shielding devices.
Lightning Protection
To prevent the risk of lightning, you are advised to ensure the following:
- The device is well-grounded.
- Based on onsite conditions, install lightning arrestors
SPECIFICATIONS
Model | Kyla-NVR1216-16P |
---|---|
Channels | 16 Channels (Up to 8MP IP Camera) |
PoE Ports | 16 x RJ45 10M/100M Adaptive Ethernet Standard POE PSE |
IEEE802.3af/at
HDD Bay| 2 x 3.5” HDD SATA Bay (Support up to 22TBX2)
Recommended to use Surveillance Grade to optimal long recording storage.
USB| 2 x USB2.0
Audio / Video| 1 x VGA up to 1080P, 1 x HDMI up to 4K
1 x HDMI, 1 x 3.5mm (Headphone or speaker)
Dimension (W x D x H)| 438 mm x 245mm x 48 mm
Power Consumption
| ****
Max. 4.85W ( exclude with 16 PoE power feeding, HDD) Max. 37 W ( with 16 PoE power feeding, exclude HDD)
Power| 48V/ 4.0A
Temperature| Operating temperature: 0°C ~ +55°C
Humidity| Operating humidity: 10% – 90% (non-condensing)
NOTICE
The information in this document is subject to change without Note. Every effort has been made in the preparation of this document to ensure the accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Aztech is not responsible for printing or clerical errors.
PREVENTIVE AND CAUTIONARY TIPS
- Device Cleanliness
- You must install the device in an environment as free from dust and foreign conductive material (i.e., metal flakes from construction activities) as is possible.
- Clean the area to prevent accumulation of dirt or dust (i.e., spider web)
- Device Care
- Do not place heavy objects on the device or block the air vent holes (if any).
- Do not install at the area near to water or fire hazard area.
- Switch off the device if you are not using it for a long period of time.
- Regularly check the Internet connection status of the device.
- Battery Replacement
Type
|
CR2032
---|---
Battery Life
|
Refer to the manufacturer’s instructions or contact the manufacturer for details
No Charge
| When the battery loses its charge, the CMOS data (such as the system time and BIOS settings) may be incorrect or even lost.
Replacement
| 1. Prepare a new battery.
2. Switch off the device and disconnect it from a power outlet.
3. Wear a grounding wrist strap to replace the old battery with the new one. During replacement, do not mix up the anode and cathode.
Recommended to contact the local authorized Aztech Partner / Agent / Reseller for battery replacement
Disposal
|
Dispose of used batteries according to local laws or regulations
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions
DEVICE DESCRIPTION
INSTALLING AN HDD
Note: You are advised to install an HDD before using the device. If you do not install an HDD:
- You cannot use the recording function.
- When the device starts operating and detects that no HDD is installed, the beeper will go off and an alarm will be generated. To clear the alarm, on the OSD of the device, choose Siren logo (top right) – Clear Alarm
-
Prepare an HDD.
You are advised to use a recommended HDD. Contact your system administrator for the list of recommended HDDs.- Recommended HDD Grade: minimum surveillance grade
- Recommended HDD Brand: Toshiba, Seagate and Western Digital
- Supported Capacity: Up to 22TB x2
-
Take out 4 screws and 4 rubber rings from the screw set
-
Put the 4 rubber rings into the holes of the hard drive brackets on both sides
-
Tighten the 4 screws to secure the hard drive and bracket
-
Place the hard drive and bracket onto the corresponding screw holes of the chassis and tighten the screws.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>