PHOENIX IN0142-REV-B Radii Toilet Roll Holder Round Plate Instruction Manual

PHOENIX IN0142-REV-B Radii Toilet Roll Holder Round Plate

Product Specifications

• Brand: RadII Accessories
• Model: IN0142
• Material: Chrome plated

Mounting Kit Includes

• Accessory
• Dress Plate
• Washer
• Bolt
• Grub Screw
• Mounting Plate
• Self Tapping Screw x 4
• Plastic Plug 30mm x 4

Product Usage Instructions

1. Place fixing plate where accessory is to be mounted. Mark the center position of slotted holes.

Single Fixing Point:

• Ensure dimple points downwards.

Double Fixing Point:

• Use both vertical and horizontal hole positions for double fixing installations.
• Use horizontal hole positions for single fixing installations such as toilet roll holder, towel rack, shower shelf.
• Ensure dimple points downwards.

For fixing to brick walls with hard plaster or ceramic tiled surface:

• Using a 6mm masonry drill bit, drill 4 holes 30mm deep (2 holes for double fixing). Press plugs into holes.
• For plasterboard wall use expanding toggle screws (not supplied).
• Place Mounting Plate in position. Insert screws and tighten firmly with a Phillips Head screwdriver.
• Ensure the accessory, dress plate, and washer are fastened together firmly.
• Place accessory flange over mounting plate and tighten grub screw firmly with an Allen key.

Maintenance and Care

• Chrome plated surfaces should be cleaned with mild liquid detergent or soap and water.
• Do not use cream cleaners or citrus-based cleaning products as they are abrasive.
• Use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered by warranty.

Frequently Asked Questions (FAQ)
Q: What should I do if I encounter difficulties during installation?
A: If you face challenges during installation, please refer to the detailed installation instructions provided in the manual. If you still require assistance, feel free to contact our customer support for further guidance.

RADII ACCESSORIES INSTALLATION INSTRUCTION

www.phoenixtapware.com.au

MOUNTING KIT

1. 1. Accessory

2. Dress Plate

3. Washer

4. Bolt

5. Grub Screw

6. Mounting Plate

7. Self Tapping Screw x 4 8: Plastic Plug 30mm x 4
   

8. Place fixing plate where accessory is to be mounted. Mark center position of slotted holes.
   Single Fixing Point
   Use both vertical and horizontal hole positions for Single fixing installations such as toilet roll holder, guest towel holder.
   
   Double Fixing Point:
   Use horizontal hole positions for double-xing installations such as towel rails, towel rack, and shower shelf.

9. For fixing to brick walls with hard plaster or ceramic tiled surface.
   Using a 6mm masonry drill bit, drill 4 holes 30mm deep (2 holes for double fixing). Press plugs into holes.
   For plasterboard wall use expanding toggle screws (not supplied).

Place Mounting Plate in position. Insert screws and tighten firmly with a Phillips Head screwdriver.

4. Ensure the accessory, dress plate and washer are fastened together rmly.

5. Place the accessory flange over the mounting plate and tighten the grub screw firmly with an Allen key.

Maintenance and Care

Chrome plated surfaces should be cleaned with mild liquid detergent or soap and water. Do not use cream cleaners or citrus-based cleaning products as they are abrasive.
Use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered by warranty.

IN0142 revB

References

• Tapware, Showers & Bathroom Accessories | Phoenix Tapware

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>