Elmag GBM 4 40 SGA Gear Column Drill Set User Guide
- June 2, 2024
- ELMAG
Table of Contents
Elmag GBM 4 40 SGA Gear Column Drill Set
Specifications
| Component | Description | Part Number |
|---|---|---|
| HSS Drill Bit Set | 9 pcs., MK 2/MK 3, 14.5 – 30 mm | 82032 |
| Machine Vice | 6′ / 150 mm with prisms | 16086 |
| Clamping Screws | 14 mm complete | 89033 |
| Cutting Oil Spray | 350 ml | 78082 |
| Item Number | 82008 | |
| EAN Code | 9004853820083 |
Technical Facts
- Drilling capacity Ø 40 mm
- Dimensions: 424x424x600 mm
- Spindle projection: 325 mm
- Powerful drive motor: 400 V, 2-stage 2.200 W / 1.500 W
- Long-life gearbox, 12 speed settings: 70 – 2.600 RPM
- Right and left rotation
- Thread cutting mode with reversible rotation direction switchable at the control lever
- Automatic feed pin, 3-stage: 0.1 / 0.2 / 0.3 mm/revolution
- Automatic tool ejector
- Drill spindle protective cover
- Drill depth scale and stop
Product Highlights
- Halogen worktable lighting
- Powerful gear head with 2.200 / 1.500 W
Standard Equipment
- Quick-action drill chuck B 16, 1 – 16 mm
- Morse taper MK 4 / B 16
- Reduction sleeves MK 4 / MK 3
- Reduction sleeves MK 3 / MK 2
- Reduction sleeves MK 3 / MK 1
- Drill drift
- Tool kit
- Operating instructions / CE
Technical Data
| Feature | Specification |
|---|---|
| Drilling Performance in Steel | 40 mm |
| Thread Cutting Performance | M24 |
| Spindle Mount (Rotating Spindle) | MK 4 |
| Speed Range | 70 – 2600 RPM |
| Speed Stages | 12 |
| Quill Stroke | 150 mm |
| Quill Advance Stages | 3 |
| Quill Advance | 0.1/0.2/0.3 mm/revolution |
| T-Slots Width | 14 mm |
| Drill Stroke | 550 mm |
| Spindle Projection | 325 mm |
| Drill Head Swivel | ± 90° |
| Drill Head Rotation | ± 180° |
| Distance From Spindle to Table | 45 – 600 mm |
| Drill Table Surface | 424×424 mm |
| Motor Power | (2-stage) 2200 / 1500 W |
| Power Supply | 400/50 V/Hz |
| Coolant Pump Capacity | 6 l/min |
| Dimensions | 424x424x600 mm |
| Base Plate Size (lxb) | 505×760 mm |
| Weight | 670 kg |
Start-up Service
ELMAG – Quality guaranteed competent execution with ELMAG quality check, including:
- Decommissioning, degreasing, and securing
- Assembly up to operational readiness
- Filling of gearboxes, oil baths, and central lubrication
- Electrical test, safety components, and circuits
- Test run at all transmission and performance levels
- 30-minute test run at the highest performance level
- Inspection and possible adjustment of machine tolerances, e.g., chuck tension and spindle run
- Inspection of all machine functions
For lathes, additionally:
- Chuck assembly with minimal tolerance markings
- Measurement of spindle runout to a tolerance of < 0.01 mm
- Measurement of chuck
- Adjustment of tailstock parallelism
For MIG/MAG/MMA/IG welding devices, plasma cutting devices, and induction heating devices according to device type:
- Assembly of the device, travel test mount
- Mounting on the power plug, gas connection plug
- Connection preparation for gas back pressure valve
- Control plug connection assembly
- Installation / fixing of water safety device in modular systems
- Filling with coolant for liquid-cooled systems
- Short test run or trial welding
FAQ
What is the drilling capacity of this machine?
The drilling capacity of the GBM 4/40 SGA is Ø 40 mm in steel.
What are the dimensions of the machine?
The dimensions are 424x424x600 mm.
What is the weight of the machine?
The machine weighs 670 kg.
Does the machine have a thread cutting mode?
Yes, it features a thread cutting mode with a reversible rotation direction that can be switched at the control lever.
Is there a warranty or start-up service available?
ELMAG offers a quality check and start-up service, ensuring the machine is set up correctly and operational to professional standards.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>