ELMAG 15060 DC Welding Inverter Instruction Manual

: June 2, 2024
: ELMAG

Table of Contents

15060 DC Welding Inverter
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
SPECIFICATIONS
ELMAG® – Start-up Service
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

TIG/TIG AC/DC WELDING INVERTER AD
2060M P/PFC/MV ECO-SET-W

15060 DC Welding Inverter

‘Multi Line’ without steel cylinder consisting of:
1 pc. welding inv. AD 2060M P/PFC/MV
Art. no.: 15060
1 pc. Water cooling unit WK-1-MINI
Art. no.: 15100
1 pc. transport trolley with 2 wheels ‘T2000V
Art. no.: 15110
1 pc. Tig hose p. SRC 18/4 m – HF U/D (3DT)
Art. no.: 15830
1 pc. pressure reducer for steel cyl.
Art. no.: 54106
1 pc. cooling liquid BTC-20 NF, 5 lt.
Art. no.: 56406
1 pair of 5-finger welding gloves
Art. no.: 59140
Article Number: 15062
EAN Code: 9004853150623

TECHNICAL FACTS

Suitable for production/repair/maintenance/assembly companies as well as pipeline/metal/railing/machine/plant and container construction
Digital display for welding current (A) and special functions
Option of setting the complete TIG cycle incl. spot welding/pulse/2-cycle/4-cycle and repeat function
DC direct current, AC square waveform, AC sine waveform selection
UP/DOWN current control at the TIG hose package by means of push button +/- 20 A, optionally also stepless 0max. Amps via potentiometer
The pulse frequency is adjustable from 0.3-999 Hz and the balance from 5-95%, this allows for a better weld pool control, reduced heat input or deeper penetration
Furthermore, the AC balance (+/-5) and the AC frequency (50-250 Hz) can be used to affect the cleaning effect and arc concentration during aluminium welding
PFC TECHNOLOGY (Power Factor Correction): Ensures a stable welding process even in the case of fluctuating mains voltage without negative effect on the welding arc
MULTIVOLTAGE: Design ensures wide range of applications, even abroad
Energy-saving, low open-circuit voltage, thermally controlled fan
The high efficiency meets the strict EU standards for environmentally friendly design
HOT START+ (adjustable 0-100%): Ignition current increase ensures better arc ignition
ARC FORCE+ (adjustable 0-100%): Increase in welding current when approaching the workpiece too closely to prevent sticking of the rod electrode as well as more uniform welding and deeper penetration
ANTI STICK: Automatic welding current reduction in case of sticking of the electrode to prevent annealing and to be able to detach them more easily
JOB Function: 9 welding programmes can be stored
GEN POWER: Operation possible by means of voltage-regulated current generator
EXTENSION: Can be used with up to 100 m extension cable (3 x 2.5 mm²)

PRODUCT HIGHLIGHTS

TIG/TIG AC/DC welding inverter
Portable TIG/TIG welding inverters with modern IGBT design for alternating current (AC) and direct current (DC) welding of aluminium, steel, stainless steel and copper. Switchable between HF TIG welding with contactless high·frequency ignition, LIFT TIG welding (without HF) and MMA/E-hand welding. Available as ECO-SET-G = gas-cooled variant, ECO-SET-W = water-cooled variant incl. transport trolley.

Standard configuration

4 m TIG-hose package SRC 26/4 m – HF U/D (3DT) incl. UP/DOWN Current control on handle, gas-cooled / plug Ø 13 mm, 35/50 mm²
Water cooling unit WK-1-MINI (with cooling liquid down to -17 °C, 5 lt.)
Transport trolley with 2 wheels ‘T2000V’ (for self-assembly)
3 m earth cable 25 mm² / plug Ø 13mm, 35/50 mm²
4 m electrode holder welding cable 25 mm² / plug Ø 13 mm, 35/50 mm²
2.5 m gas hose for argon incl. quick fit quick connector DN5
1 pressure regulator for argon, 0-12 lt./min. incl. quick fit coupling DN5
19-piece TIG initial equipment set
1 pair of TIG welding gloves size 9.5/XL

SPECIFICATIONS

welding electrodes diameter| 230 V: TIG 1.0-4.0 mm / MMA 1.6-5.0 mm | 110 V: TIG 1.03.2 mm / MMA 1.6-3.2
mm
---|---
welding current setting| 230 V: WIG/MMA 5-200 A | 110 V: WIG 5-160 A / MMA 5130
A
100 % welding power source (10 min at 40 °C) at welding
current| 230 V: WIG 100 / 155% / A / MMA 100 / 110% / A | 110 V:
WIG 100 / 125% / A / MMA 100 / 105 A
welding power source (10 min at 40 °C) at welding current| 230 V: WIG 60 / 200% / A / MMA 35 / 200% / A | 110 V: WIG
90 / 130 % / A / MMA 60 / 130 % / A
Open circuit voltage| 67 V
voltage / phases| 230 / 1 | 110 / 1 V / ~
power tolerance| 230 V: +15 / -60% | 110 V: +150/-15 %
anti-surge fuse| 230 V: WIG/MMA 16/32 AT | 110 V: TIG/MMA 32/63 AT
Degree of protection (IP)| IP23
Efficiency| 85%
power consumption in idle mode| 230 V: 42.6 W | 110 V: 43.9 W
input power l1 max. / l1 eff.| 230 V: WIG 21 / 16 A / MMA 32 / 19 A | 110V: WIG 32 / 25 A
/ MMA 40 / 22 A
ground connection plug / cross-section| 13 / 25 O / mm2
connector| Schuko 16 A
Width| 610 mm
Depth| 190 mm
Height| 375 mm
Weight| 15.5 kg