IntelliARK V6 Multi-Function Mobile Phone Holder User Manual

IntelliARK V6 Multi-Function Mobile Phone Holder

Appearance Description

Remote Control:

How To Use

1 Please push as the arrow direction to open in case of force damag

Product Parameter

Product Name: Multi-Function Phone Holder
Product Model: V6
Remote-control distance: ≤10M
Rated Input: DC5V/200mA
Fill Light Battery Capacity: 1000mAh
Remote Controller Battery Capacity: 50mAh
Main Material: Aluminum Alloy, ABS+PC
Stretching Friction Strength: 1KG-2.5KG
Enterprise Standards:Q/ZHZZ 001-2020
Working Temperature: -10°C~+40°C
Supported System: Android/ IOS
Size: 210X80X63mm
Maximum Extended Length: 1300MM
Net   Weight：about 1126g
Gross Weight: about 1226g

The product is in energy-saving mode when come out from the factory. For the first time use, please long press the product one side two fill light button at the same time for 2 seconds to activationthen use the product. Fill Light Button (ON/OFF Button

Remote Control Instruction

1. Power On
   Long press the camera button for 2 seconds, the blue flash light flash and product goes in to the pairing status.

2. Bluetooth Pairing
   Turns on your phone Bluetooth function in setting, search the product to recognize “DOXG-V6” and click to pair. The blue light off after the device paired successfully. (If your phone’ s volume button has been set for shutter, and you can’ t use it properly, please download 360Camera or MeiTu Camera App etc., and set the volume button for camera shutter in APP Settings to take photo.) The products without being paired with your phone within 300s will get in to sleeping mode, press the camera button once to activate it.

3. Recording Video/ Take Photo
   After finish the Bluetooth pair, open the phone camera, press the product camera button to take photos or record video and the blue light will blink once.

4. Power Off
   Long press the camera button for 2 seconds, the blue light flash and product being turns off

5. .Sleeping Mode
   If the device unused in 300s after being paired successfully, it turns into sleeping mode, press the camera button once to activate it.

6. Take Photos
   Press the selfie stick shutter button to take photo. Activate it first if the device in sleeping mode.

Fill Light

1. Turn on
   Long press the light button 2s to turn on the light device, the light in white light level-1.7 light effects
   White light: level-1, level-2
   Yellow light: leve-1, level-2
   Mixed-color light: level-1, level-2, Level-3
   Then short press the button to switch to others light effects by turns in circulation.

2. Turn off:
   Long press 2s, the light device turns off.

• Aim your remote at fill light infrared receiver when you use remote controller to adjust the light.
  Fill Light Working Time: 3-12h

  3. Accessories:
     V6 1
     User Manual1
     Charge Cable *1
     The picture is only for reference, please make the object as the standard. We reserve the right for final explanation.

Warranty

1. Please keep your service card or receipt safe for maintenance certificate.
2. Warranty period is 6 month since the acquisition date.
3. During warranty period, if there are any problems or malfunction about this product in the case of normal use and maintenance, after verification, we will provide free repair and component replacement. The following situations are not included in warranty

We provide free repair and component replacement during warranty period. Damage or malfunction caused by the following situations are not included in warranty (even though during warranty period) , we assume no obligation to provide free warranty.

1. Devices, components is beyond the warranty period.
2. Damage caused by abnormal use such as any use,maintenance or wrong installation not according to the requirements of the product manual.
3. Damage caused by non-production manufacturer authorization server disassembly.
4. Damage caused by accidents or man-made reasons (Error in operation, scratch, transfer, bump, inappropriate voltage and current input, etc).
5. Damage caused by force major such as fires, floods and lightning.

Declaration of Conformity (FCC) Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference
(2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>