DOM Quinn Full Size Folding Crib Instruction Manual

: June 12, 2024
: DOM

Table of Contents

DOM Quinn Full Size Folding Crib
Product Information
Product Usage Instructions
INSTALLATION
PARTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DOM Quinn Full Size Folding Crib

DOM-Quinn-Full-Size-Folding-Crib-PRODUCT

Product Information

The product is manufactured by Dream On Me Inc. and is made in China. The manufacturing date is May 2020. The product is a crib and requires assembly. It comes with various components including headboards, rails, stabilizer bar, mattress board, plastic block, castors, latches, screws, nuts, washers, wood dowel, and a metal pin. The product requires a Phillips head screwdriver and a wrench for assembly, which are not included.

Product Usage Instructions

Step 1: Assemble the latch (i & j) to the headboard (A & B).
Step 2: Connect the rail (C) and stabilizer bar (D) to the headboard (A & B) using the 5/8 screw (k). Assemble the plastic block (n) horizontally to the headboard (A & B) using a 3/4 screw (m). Do not fully tighten the bolts.
Step 3: Slot in the metal pin into the notch of the left and right headboard side corner posts. Move it up and down to the highest level.
Step 4: Connect the rail (C) to the headboard (A & B) using screws (a), nuts (b), washer (g), and washer (h). Fully tighten all the bolts.
Step 5: Assemble the castors (e & f) to the leg bottoms on the headboard (A & B). Two castors (e) with brakes are in the front. Then add the mattress (F).
Step 6: Select the desired level and use both hands to lift up the mattress base. Adjust the level to your required height of the 2 levels. Slide in the bolt underneath the mattress board (E) to keep the mattress support fixed.

Folding Instructions:

Take out the mattress (F).
Take out the mattress board (E).
Unlock the latch on the headboard.
Fold the crib.

Additional Information:

A Phillips head screwdriver and wrench are required for assembly (not included).
The product comes with a QR code for registration and customer support.
Contact Dream On Me Inc. for any questions, concerns, or feedback.
Follow Dream On Me Inc. on social media for nursery features and monthly giveaways.
The product meets specific mattress size requirements for safety.

CAUTION : ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 IN. (69CM) BY 51 5/8 IN. (131CM) WITH A THICKNESS NOT EXCEEDING 6 IN. (15CM) AND THE MINIMUM MATTRESS THICKNESS OF 4 IN.(10CM) USE A CRIB MATTRESS THAT IS NO THICKER THAN 15 CM THICK AND IS OF SUCH SIZE THAT, WHAT IT IS PUSHED FIRMLY AGAINST ANY SIDE OF THE CRIB, IT DOES NOT LEAVE A GAP OR MORE THAN 3CM BETWEEN THEN MATTRESS AND ANY PART OF THE SIDES OF THE CRIB.

INSTALLATION

Step 1: Assemble the latch (i & j) to the headboard (A & B). $DOM-Quinn-Full-Size-Folding-Crib-FIG- $1$$
Step 2: Connect the rail (C) and stabilizer bar (D) to the headboard (A & B) using the 5/8 screw (k). Assemble the plastic block (n) horizontally to the headboard (A & B) using a 3/4 screw (m). Do not fully tighten the bolts. $DOM-Quinn-Full-Size-Folding-Crib-FIG- $2$$
Step 3: Slot in the metal pin into the notch of the left and right headboard side corner posts. Move it up and down to the highest level. $DOM-Quinn-Full-Size-Folding-Crib-FIG- $3$$
Step 4: Connect the rail (C) to the headboard (A & B) using screws (a), nuts (b), washer (g), and washer (h). Fully tighten all the bolts.
Step 5: Assemble the castors (e & f) to the leg bottoms on the headboard (A & B). Two castors (e) with brakes are in the front. Then add the mattress (F). $DOM-Quinn-Full-Size-Folding-Crib-FIG- $5$$
Step 6: Select the desired level and use both hands to lift up the mattress base. Adjust the level to your required height of the 2 levels. Slide in the bolt underneath the mattress board (E) to keep the mattress support fixed. $DOM-Quinn-Full-Size-Folding-Crib-FIG- $6$$

Follow bellow to fold the crib: $DOM-Quinn-Full-Size-Folding-Crib-FIG- $7$$

take out the mattress (F)
take out the mattress board (E)
unlock the latch on the headboard
fold the crib

PARTS

$DOM-Quinn-Full-Size-Folding-Crib-FIG- $9$$

WARNING

DO NOT USE THIS CRIB IF YOU CANNOT EXACTLY FOLLOW THE ACCOMPANYING INSTRUCTIONS.
INFANTS CAN SUFFOCATE ON SOFT BEDDING. NEVER ADD A PILLOW OR COMFORTER. NEVER PLACE ADDITIONAL PADDING UNDER A INFANT.
FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE
TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS TO BE PLACED ON THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.
STRANGULATION HAZARD – STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND A CHILD’S
NECK,SUCH AS HOOD STRINGS OR PACIFIER CORDS. DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.
STRANGULATION HAZARD – TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE FASTENERS
STRANGULATION HAZARD – DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD
FALL HAZARD – WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT
FALL HAZARD – WHEN A CHILD IS ABLE TO CLIMB OUT OR REACHES THE HEIGHT OF 35IN.(89CM), THE CRIB SHALL NO LONGER BE USE D.
FALL HAZARD – (FOR FOLDING SIDE CRIBS) AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURE.
FALL HAZARD – (FOR FOLDING SIDE CRIBS) DO NOT LEAVE CHILD IN CRIB WITH SIDE LOWERED. BE SURE SIDE IS IN RAISED AND LOCKED POSITION WHENEVER CHILD IS IN CRIB.
CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, LOOSE BOLTS OR OTHER FASTENERS,
MISSING PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE.
SECURELY TIGHTEN LOOSE BOLTS AND OTHER FASTENERS.
DO NOT USE CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT DREAM ON ME INC., FOR REPLACEMENT
PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED. DO NOT SUBSTITUTE PARTS.
FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB.
DO NOT USE A WATER MATTRESS WITH THIS CRIB.
IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.
INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS TOO SMALL.
REPLACE TEETHING RAIL IF DAMAGED, CRACKED OR LOOSE