PLIANT PMC-2400M MicroCom Single Channel Wireless Intercom System User Guide
- June 6, 2024
- PLIANT
Table of Contents
**PLIANT PMC-2400M MicroCom Single Channel Wireless Intercom System User Guide
**
PRODUCT OVERVIEW
IN THIS BOX
WHAT’S INCLUDED WITH MICROCOM 2400M?
- Holster
- Neck Strap
- USB Charging Cable
ACCESSORIES
OPTIONAL ACCESSORIES
- PAC-USB5-CHG: MicroCom 5-Port USB Charger
- PAC-MC-5CASE: IP-67-rated Hard Travel Case
- PAC-MC-SFTCASE: MicroCom Soft Travel Case
- Selection of compatible headsets (see Pliant website for more details)
SETUP
- Connect a headset to the belt pack.
- Power on. Press and hold the Power button for three (3) seconds, until the screen turns on.
- Select a Group. Press and hold the Mode button for 3 seconds until the “GRP” symbol is blinking on the LCD. Then, use the Volume +/− buttons to select a group number from 0–51. Short-press Mode to save your selection and proceed to ID setting.
IMPORTANT: Belt packs must have the same group number to communicate.
- Select an ID. When “ID” begins to blink on the LCD, use the Volume +/− buttons to select an ID number. Press and hold Mode to save your selection and exit the menu.
a. Pack IDs range from 00–05.
b. One pack must always use the “00” ID and serve as the master pack for
proper systemfunction. “MR” designates the master pack on its LCD.
c. Listen-only packs must use the “05” ID. You may duplicate ID “05” on
multiple belt packs if setting up listen-only users. (See the MicroCom 2400M
Manual for more information about that process.)
d. Shared Talk beltpacks must use the “Sh” ID. You may duplicate ID “Sh”
on multiple beltpacks if setting up shared users. However, the “Sh” ID cannot
be used atthe same time as the last full-duplex ID (“04”).
OPERATION
- Talk – Use the Talk button to enable or disable talk for the device. This button changes with a single, short press. “TK” appears on the LCD when enabled.
- For full-duplex users, use a single, short press to toggle talk on and off.
- For Shared Talk users (“Sh”), press and hold while talking to enable it for the device. (Only one Shared Talk user can talk at a time.)
- Volume Up and Down – Use the + and − buttons to control the volume. “VOL” and a numerical value from 00–09 appear on the LCD when volume is adjusted.
Multiple MicroCom Systems
Each separate MicroCom system should use the same Group for all belt packs in
that system. Pliant recommends that systems operating in proximity to one
another set their Groups to be at least 10 values apart. For example, if one
system is using Group 03, another system nearby should use Group 13.
Battery
- Battery life: Approx. 10 hours
- Charge time from empty: Approx. 3.5 hours
- Charging LED on belt pack will illuminate red while charging and will turn off when charging complete.
- Belt pack may be used while charging, but doing so may lengthen charge time
Menu Options
To access the menu, press and hold the Mode button for 3 seconds. Once you have finished your changes, press and hold Mode to save your selection and exit the menu.
| Menu Setting | Default | Options | Description |
|---|---|---|---|
| Side Tone | S3 | SO | Off |
| 51-55 | Levels 1-5 | ||
| Receiving Mode | PO | PO | Rx & Tx Mode |
| PF | Rx-Only Mode (Listen-Only) | ||
| Mic Sensitivity Level | C1 | C1—05 | Levels 1-5 |
| Audio Output Level | UH | UL | Low |
| UH | High |
Recommended Settings by Headset
| Headset Type | Recommended Setting |
|---|---|
| Mic Sensitivity | Audio Output |
| Headset with boom mi | C1 |
| Headset with lavalier mic | C3 |
CUSTOMER SUPPORT
Pliant Technologies offers technical support via phone and email from 07:00 to
19:00 Central Time (UTC−06:00), Monday through Friday.
1.844.475.4268 or +1.334.321.1160
[email protected]
You may also visit our website (www.plianttechnologies.com) for live chat help. (Live chat available 08:00 to 17:00 Central Time (UTC−06:00), Monday–Friday.)
Additional Documentation
This is a quick start guide. For additional details on menu settings, device
specifications, and product warranty, view the full MicroCom
Operating Manual on our website. (Scan this QR code with your mobile device to
navigate there quickly.)
COPYRIGHT © 2020 Pliant Technologies, LLC. All rights reserved. The Pliant™
word mark and the Pliant “P” logo are trademarks of Pliant Technologies, LLC.
Any and all other trademark references within this document are property of
their respective owners.
Document Reference: D0000522_B
