GBF MR920 WiFi IP Indoor Monitor User Manual

GBF MR920 WiFi IP Indoor Monitor User Manual

Install app “doordeer” before setup an indoor monitor

in APP store（iPhone or iPad） or google play（Android mobile phone）

Installation and Sign up user account

After installation， You can sign up an user account.
Choose the nearby service region for better user experience.

Add your first indoor monitor

Indoor monitor support both WIFI and RJ45 cable network connection.

• If the device use RJ45 cable connection, make sure router and switch support DHCP and turn on your mobile phone WIFI setting and choose the same network as the indoor monitor connected. When click “add device”, APP will find the indoor monitor and you can add it into device list.

• If the indoor monitor uses WiFi, Please go to indoor monitor wifi setting page (Settings – wifi setup), It is ready for setup when the WiFi
  configuration page appears (see the right image). Then
  turn on the mobile phone wifi and select the same network that the monitor will connect to.
  

• Open Doordeer app and switch to left slider bar, click “Add Device” to add your indoor monitor, see the following steps:
  

1. The Doordeer APP will use “LAN Search” to find any online indoor monitor at the same network. You will see Monitor-hhxxxx in your new device list, then click that and add into your device list. If you could not see any device found in LAN Search, then use “MY DEVICE NEED TO CONFIGURE WI-FI CONNECTION”.
   

2. Wi-Fi Configuration Continue: Make sure your smart phone cellular data is turned off and use the same wifi connection as this indoor monitor. Then press “CONTINUE”.
   

3. Check your wifi name and enter your wifi password:
   The APP will automatically search your wifi and find your wifi name, you just need to double check that is the correct wifi for this indoor monitor to connect or not.
   Then input your wifi password into the blank space twice, then press “START CONFIGURATION”.

4. Start wifi configuration for the indoor monitor:
   

5. Find the new device and add that:
   The APP will find this indoor monitor and the new device will show in the window “SELECT THE DEVICE YOU WANT TO ADD”. Then you just need to click this Monitor-hhxxxx, it will lead to your next page for naming indoor monitor.

6. Naming indoor monitor:
   You could add the new name for your indoor monitor first, then select Master Monitor for your indoor monitor. The Extension monitor is for the second or 3rd monitor in that same room. In SET UP PLAYLIST, you need to select which outdoor station you would like this indoor monitor to connect, check the box for that outdoor station to confirm your selection.
   

7. After you select your outdoor station for this new indoor monitor, the APP will show you “Binding device succeed”. Then press ok to continue.
   

8. Indoor monitor ICON in Doordeer APP:
   After the indoor monitor is successfully added into your system, you will see this indoor monitor ICON in Doordeer APP. You could press Setting icon to change this indoor monitor setting such as rename, select second outdoor station etc..
   

Choose the doorbell(s) you want to bind to indoor monitor

During adding indoor monitor, you can choose the different outdoor stations or multiple door stations in device list to bind the indoor monitor.

Indoor monitor UI introduction

After added in app , indoor monitor will automatically reboot and update the system in 10 minutes.

Basic Settings

You can setup ringtones and switch to WIFI setup mode. Setup 12-24 hours mode

Cloud & SD card record playback

Click events button, you can playback the activities in cloud or SD card.

Live monitor and unlocking

Doordeer indoor monitor supports up to 4 channels live video simultaneously. To see more detail you can enlarge it by single-click the small window.

Calling, talking and unlocking

When a visitor presses your room number or your name in outdoor station, indoor monitor will show the video of door station camera and it will send ringing notification as well. You can answer the visitor and talk, unlock from this indoor monitor.

Tips

1. before add your first indoor monitor
   You need at least one door station added in your doordeer app account .
   Then you can bind one or multiple door stations with your indoor monitor or multiple indoor monitors.

2. Can indoor monitor work with LAN which do not connect to internet
   Yes it can. When indoor monitor and door station are in the same Local area network (LAN), they can work fluently. Your mobile phone will not get a push notification when LAN does not connect internet.

3. How many days will the history video be stored in the cloud ?

4. 1 day for basic plan and 10 days for plus plan

Customer Support

GBF Customer Support Contact:
Phone: 1-604-278 6896 or 1-604-285 8721
Email: [email protected]
URL: www.gbfelectronics.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>