VINCI KSNY00XC Wireless Charging Pad User Manual
- June 8, 2024
- Vinci
Table of Contents
wireless charging pad
User Manual
KSNY00XC Wireless Charging Pad
Please read the instructions before using the product
Parameter specification
Model: KSP-002
Input voltage/current: DC5.0V/2.0A, 9.0V/2.0A
Output power: 15W(max)
Interface: type-C (PD protocol)
charging frequency: 110~148 KHz
Transmission distance: ≤ 5 mm
Efficiency: ≥75 %
Product size: Φ 60 x 7,5 mm
Installation
- plug the PD adapter into the socket.
- USB-C interface to connect to the power adapter.
- place the mobile phone with wireless charging function on the transmitter pad correctly, and try to ensure that the wireless receiving coil is aligned with the center of the product.
- after charging is completed, remove the wireless charger.
Remarks:
- this wireless charger pad can support all Qi standard equipments.
- only the standard PD protocol power adapter can support the fast wireless charging of this product, the power adapter needs to be purchased separately.
Note: try to ensure that the wireless receiving coil is aligned with the enter of the product. the wireless receiving coil is generally in the center bf the mobile device.
Important notes
When the wireless charger is charging for the mobile device, if you run a power-consuming application on the mobile device or use the application on the device for a long time, the mobile device heats up. this is a normal phenomenon and will not affect the service life or performance of the evice.
- this product only supports original apple protective covers, can not uarantee to be compatible with third-party magnet accessories.
- it is recommended to use an adapter with PD certification, or other PD dapter that comply with international safety standards.
- the equipment can be used between 0°C – 35°C, and can be stored between -20°C and 50°C. if the device is used or stored outside the recommended temperature range, it may damage your device or shorten he battery life.
- please prevent children or animals from chewing the equipment.
- do not disassemble, modify, or repair the equipment.
- do not place magnetic stripe cards (including credit cards, phone ards, bank books, and registration cards) near the charging device to avoid damage from the magnetic field generated by the device.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to pad 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment enerates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no uarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
hich the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for on
uncontrolled environment. This equipment should be installed and perated with
minimum distance 20cm between the radiator & your body.
Warranty
there is one year guarantee for this product unless anthropogenic factor.
Packing list
wireless charger user manual
- The involved images are sketch maps, the final product as per the material subjects.
ONE YEAR LIMITED WARRANTY
Please visit for full details:
www.vincibrands.com/support/warranty-
policy
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference recived, including interference that may cause undesired operation.
manufactured by Vinci Brands LLC
for customer support, please contact us at:
Vinci Brands LLC 1351 railroad st unit 101 corona, ca 92882 usa
email: support@vincibrands.com
www.vincibrands.com
kate spade new york and the kate spade new york logo are trademarks of kate space, Ilc. In the US and other countries. made in china.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>