Allesgute GU10 LED Bulbs Cool White 6000K Spotlight User Manual
- June 14, 2024
- Allesgute
Table of Contents
Allesgute GU10 LED Bulbs Cool White 6000K Spotlight
This GU10 Spotlight Is Manufacturered by EU Regulation EN 61000-3-2 Please read this user manual carefully and keep it for future reference.
Basic product informaon
| Bulb Type | Gu10 LED Bulb |
|---|---|
| Voltage | AC 220-240V,50/60Hz |
| Beam Angle | 120° Wide Cone |
| Color Rendering Index | > 80Ra |
| Bulb Life(L70B50) | 30,000hrs |
| Dimmable | Not Dimmable/Dimmable |
| Guarantee | 2 Years |
| Product Size (∅* H) | 1-7/8″(∅50mm)x2-1/8″(55mm) |
Safety Instruction
Preparation Works
- Ensure power is off before all operaon.
- Installaon and maintenance work may only be carried out by a qualified electrician by local safety regulations.
Use Tips
- All energized lines, including the pre-assembled luminaires, must be firmly screwed on or completely.
- The voltage of this bulb is AC 220-240V, please connect it directly to the mains, without connecting a transformer. Other the bulb will not work.
- Do not replace a socket or change a light bulb while it is on.
- This bulb can not be used with a dimmer, or it will flicker. If dimmable, please match the applicable dimmer switch.
- LED bulbs are only suitable for the dry environment. If use it in damp locations, please make sure to use it with enclosed waterproof fixtures.
The Name and Content of Hazardous Substances
This form is by EN 61000-3-2:
- O: Indicates that the content of hazardous substances in related parts is not detected.
- X: Indicates that the content of hazardous substances in related parts is below the limit of the requirement specified.
Common Troubleshooting
| Problem | Possible Cause | Suggested Remedy |
|---|
Not work
| ****
Loose connection, damaged or broken bulb, incorrect voltage.
| Securely insert the bulb and ensure a good connection. Check for visible damage or cracks and replace if necessary. Verify that the bulb’s voltage matches the fixture’s.
Bulb flickers
| Incorrect voltage or wattage, incompatible dimmer switch, loose connection.| Check bulb compatibility, voltage, and wattage with fixture and dimmer switch. Securely the bulb into the socket with a good electrical connection.
Overheating
| Lack of ventilation, incorrect wattage, incompatible fixture or transformer.|
Check for proper ventilation around the bulb, ensure the bulb’s wattage
matches the fixture or transformer, and check compatibility with LED bulbs.
Emits a dim light| Incorrect wattage, dirty or dusty bulb, old or worn-out
bulb.| Match bulb wattage to fixture, clean with a dry cloth to remove
dirt/dust, and replace if old/worn-out.
Emits buzzing or humming sound| Incompatible dimmer switch, incorrect wattage,
faulty wiring.| Check dimmer switch compatibility with LED bulbs, match bulb
wattage to fixture, and inspect and replace damaged or worn wiring as
necessary.
Contact us anytime
Contact us on Amazon directly
Scan the QR code on the right to contact us