samsara HW-CM-AHD1 HD Camera Connector Instruction Manual
- June 2, 2024
- Samsara
Table of Contents
samsara HW-CM-AHD1 HD Camera Connector
Parts
1x VG
1x AHD1
1x CBL-VG
1x CM
Install Tips and System Diagram
HD Camera Connector (AHD1) has one 4-pin GX12 Male Video In (CAM) connector
and one 4-pin GX12 Female Video Out (DISPLAY) connector. You may need to
supply appropriate cables and adapters for your third-party system.
If you have questions, reach out to your Samsara contact.
-
Connect the Samsara vehicle gateway to your vehicle’s diagnostic port using the provided cable.
-
Mount the vehicle gateway in the vehicle. The vehicle gateway must be mounted rigidly in order to get the “harsh events” detection feature.
-
Attach analog video signal from camera system to HD camera connector.
If this vehicle only has one camera, connect video directly to HD camera connector.
-
(Optional) Multiplexer
If this install includes a multiplexer, plug all cameras into the multiplexer first. Then attach multiplexer to video input.
-
(Optional) Display/DVR
If this install includes a display or DVR, attach “DISPLAY” output of HD camera connector to video input of display/DVR.
Where possible, always attach camera directly to HD camera connector. Adding other devices between camera HD camera connector may prevent HD camera connector from receiving video signal while in parking mode.
-
Mount HD camera connector to vehicle using included zip ties. For best thermal performance, ensure Samsara logo faces outward.
IMPORTANT: Do not bundle vehicle gateway and HD camera connector together. Risk of reduced thermal and antenna performance for both devices.
-
Connect USB cables from the CM dashcam and HD camera connector to the gateway.
-
IMPORTANT: Secure all connectors using heat shrink or electrical tape, and attach firmly to vehicle.
Failure to secure connectors may cause poor video quality.
-
Verify installation by taking a picture from Samsara dashboard.
First, ensure all items are wired correctly and powered on. Ensure HD camera connector is activated.
Go to the vehicle page in the dashboard, click the settings icon, and click “Check Dash Cam Installation” to take a picture.
Video feed from third party camera will appear in the section labelled “AUXCAM”
To rotate or mirror camera images, go to Settings>Devices
For detailed product specifications and important safety information, please refer to the data sheet available at https://www.samsara.com/pdf/docs/HD_Camera_Connector.pdf
This installation guide contains typical information specific to products manufactured at the time of its publication. The contents of this guide do not constitute a warranty and are for reference only.
Do not attempt to repair this product, use any third party replacement parts with this product, or otherwise modify this product except in accordance with product manuals or as otherwise instructed by Samsara. Failure to do so may cause property damage, lead to physical injury, or void your product warranty
Customers Support
© 2022 Samsara Inc.
samsara.com/support