samsara CBL-AG-BEQP Asset Gateway Installation Guide
- June 1, 2024
- Samsara
Table of Contents
samsara CBL-AG-BEQP Asset Gateway
CABLE DIAGRAM
WHAT YOU’LL NEED (STANDARD LOCATION INSTALLATION)
-
1x Asset Gateway
-
1x Equipment Cable
-
2x Self-drilling screws
-
7x Butt splices
-
3x Ring terminals (RV 1.25-6)
-
2x Ring terminals (RV 1.25-10)
-
3x Zip ties
ACC-AG-BHZB ACCESSORIES (OPTIONAL HAZARDOUS LOCATION INSTALLATION)
-
1x Mounting plate
-
1x Cover
-
2x Machine screws
-
2x In-line fuse
HELPFUL LINKS
Activate your Asset Gateway. This can be completed on the Samsara
Dashboard or on the Samsara Fleet
App. You can also follow the link in your
Order Shipped email.
standard location installation
Verify that the cable has adequate clearance to reach the AG and the electrical connection. When selecting a location for your device, reference the following tips:
Verify that the cable has adequate clearance to reach the AG and the
electrical connection. Ensure that the AG has a clear view of the sky. Avoid
installing the device within metallic structures, such as within metal
trailers. Placement in such structures may adversely impact device cellular
and GPS connectivity.
Attach the gateway to the asset using the provided #6 self-drilling screws with maximum torque of 7kgf-cm. If you choose to fasten the device with your own screws, use these recommendations for screw size to avoid damage to the device mounting tabs.
If you are installing at a hazardous location, use the following
recommendations:
Attach the mounting plate with included self-drilling screws to the mounting
surface. With cable plugged in,
assemble the Asset Gateway and cover. Fasten with the two included machine
screws. Wire the included 2A fuses between cable and power source(s).
WARNING — EXPLOSION HAZARD. DO NOT CONNECT OR DISCONNECT WHEN ENERGIZED. DO NOT DISCONNECT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA IS FREE OF IGNITIBLE CONCENTRATIONS.
Connect the wires using the following pinout list as a guide:
Red cable (Power):
It is recommended to wire to a key switched source, such as an hour meter or
oil pressure switch for internal
combustion engines.
Black (Ground):
Verify a ground point using a multimeter, typically a metal stud or bolt that
makes a direct contact to the metal chassis.
Green-white (Input 1):
Use for tracking hours of operation. Input examples: hour meter, oil pressure
switch, etc.
Blue-white (Input 2):
Use for tracking productivity or alerts. Input examples: hydraulic solenoid on
belt loader to track productivity when compared to engine hours
Orange (Output):
Reserved for future use
Green (CAN Lo)/Yellow (CAN Hi):
Not currently supported for AG52. For AG26 only.
After you connect the Asset Gateway to power, verify the connection in the
Samsara Dashboard. After a successful connection, the LED will turn green.
Green GPS & LTE OK
Blue No GPS, LTE OK
Red No GPS, No LTE
Yellow No LTE, GPS OK
IMPORTANT SAFETY AND USE INFORMATION
This installation guide contains typical information specific to products manufactured at the time of its publication. The contents of this guide do not constitute a warranty and are for reference only. Consult applicable local laws and ordinances to determine any installation restrictions. It is the installer’s responsibility to comply with all applicable laws and ordinances when installing this hardware.
Do not attempt to repair this product, use any third party replacement parts with this product, or otherwise modify this product except in accordance with product manuals or as otherwise instructed by Samsara. Failure to do so may cause property damage, lead to physical injury, or void your product warranty.
Any installation not in accordance with the instructions in the installation guide or otherwise in the Documentation or other than as described by the relevant IP rating or recommended operating conditions may result in physical injury or property damage. Failure to follow these directions could result in serious injury or death.
This hardware and any associated software may not be compatible with third party products and/or services and may interfere with the operations of or void warranties for such third party products and/or services.
Do not install or adjust hardware while driving or operating the vehicle. Do not install this hardware in a location that could interfere with the driver’s visibility or operation of vehicle controls. Do not install this hardware on or near airbag panels or within the working range of an airbag.
Do not install hardware while the vehicle is unsecured. Do not install hardware while the vehicle is turned on unless instructed to turn on the vehicle by the installation guide. Failure to follow installation instructions may cause serious physical injury, damage to the vehicle or the hardware, and void vehicle or other third party product warranties.
Batteries in the hardware may have a shorter life span if not used in accordance with instructions. Do not short circuit, crush, disassemble, heat above 60°C/140°F, incinerate, or expose the battery or its contents to water. Do not remove the battery from the hardware to recharge or for any other reason, including disposal. Do not solder directly to the battery cell. Do not use if battery appears damaged.
This product includes capacitors and batteries which may present a potential fire, explosion, electric shock, or burn hazard. Do not touch or come into close proximity to any capacitors within this hardware.
Keep this hardware between -40°C/-40°F to 60°C/140°F externally powered, -20°C/-4°F to 60°C/140°F discharging on battery, 0°C/32°F to 45°C/113°F charging. Failure to keep this hardware in the specified temperature range may result in safety risks.
Failure to follow mounting instructions may create risk of physical injury or property damage from falling objects. If mounting the hardware to a building wall, check for wiring or plumbing before drilling any holes.
After installation, this product will be able to charge batteries at any moment.
CAUTION SYMBOL, PLEASE REFER TO WARNINGS
DC SYMBOL, TO INDICATE DIRECT CURRENT
CUSTOMER SUPPORT
samsara.com/support
© 2023 Samsara Inc.