samsara CBL-AG-B12V Asset Gateway Installation Guide
- May 15, 2024
- Samsara
Table of Contents
samsara CBL-AG-B12V Asset Gateway
Product Information
Specifications
- Product Name : Asset Gateway
- Model Number : CBL-AG-B12V
- Languages: EN, FR, FR-CA, DE, ES, NL
- Manufacturer Website: samsara.com/support
Product Usage Instructions
-
What You’ll Need (Standard Location Installation)
- 1x Asset Gateway
- 1x Wall Adapter
- 1x Gateway Power Cable
-
Installation Steps:
-
Activate your Asset Gateway on the Samsara Dashboard or on the Samsara Fleet App.
-
Connect the Asset Gateway power cable to the wall adapter cable. Insert the power cable connector into the Asset Gateway; twist to lock. Insert the wall adapter cable into a standard wall outlet using the appropriate plug provided.
Check LED indicators for status: -
Purple – First Boot
-
Green – GPS & LTE OK
-
Blue – No GPS, LTE OK
-
Red – No GPS, No LTE
-
Yellow – No LTE, GPS OK
-
After connecting to power, verify the connection in the Samsara dashboard. A successful connection will turn the LED indicator green.
-
Important Safety and Use Information
This installation guide provides essential safety information for the
proper use of the Asset Gateway. Failure to follow these instructions may
result in injury or damage.
- Do not attempt to repair the product or use third-party replacement parts.
- Follow local laws and ordinances when installing the hardware.
- Avoid modifying the product except as instructed by the manufacturer.
- Do not install or adjust hardware while driving or operating the vehicle.
- Avoid installing hardware in locations that could interfere with driver visibility or airbag operation
- This product includes capacitors and batteries that may pose fire or electric shock hazards.
Frequently Asked Questions (FAQ)
-
Q: Can I use third-party accessories with the Asset Gateway?
A: It is recommended to use only accessories provided by Samsara to ensure proper functionality and safety. -
Q: What do the different LED indicator colors signify?
A: The LED colors indicate different statuses such as GPS and LTE connectivity. Refer to the user manual for detailed explanations. -
Q: Is it safe to install the hardware without consulting local laws?
A: It is important to comply with all applicable laws and ordinances to ensure safe installation and operation of the product.
Asset Gateway
CBL-AG-B12V
CABLE DIAGRAM
WHAT YOU’LL NEED (STANDARD LOCATION INSTALLATION)
- Activate your Asset Gateway on the Samsara Dashboard or on the Samsara Fleet App.
- Connect the Asset Gateway power cable to the wall adapter cable. Insert the power cable connector into the Asset Gateway; twist to lock. Insert the wall adapter cable into a standard wall outlet using the appropriate plug provided.
- After you connect the Asset Gateway to power, verify the connection in the Samsara dashboard. After a successful connection, the LED will turn green.
IMPORTANT SAFETY AND USE INFORMATION
- This installation guide contains typical information specific to products manufactured at the time of its publication. The contents of this guide do not constitute a warranty and are for reference only. Consult applicable local laws and ordinances to determine any installation restrictions. It is the installer’s responsibility to comply with all applicable laws and ordinances when installing this hardware.
- Do not attempt to repair this product, use any third party replacement parts with this product, or otherwise modify this product except in accordance with product manuals or as otherwise instructed by Samsara. Failure to do so may cause property damage, lead to physical injury, or void your product warranty.
- Any installation not in accordance with the instructions in the installation guide or otherwise in the Documentation or other than as described by the relevant IP rating or recommended operating conditions may result in physical injury or property damage. Failure to follow these directions could result in serious injury or death.
- This hardware and any associated software may not be compatible with third party products and/or services and may interfere with the operations of or void warranties for such third party products and/or services.
- Do not install or adjust hardware while driving or operating the vehicle. Do not install this hardware in a location that could interfere with the driver’s visibility or operation of vehicle controls. Do not install this hardware on or near airbag panels or within the working range of an airbag.
- Do not install hardware while the vehicle is unsecured. Do not install hardware while the vehicle is turned on unless instructed to turn on the vehicle by the installation guide. Failure to follow installation instructions may cause serious physical injury, damage to the vehicle or the hardware, and void vehicle or other third party product warranties.
- Batteries in the hardware may have a shorter life span if not used in accordance with instructions. Do not short circuit, crush, disassemble, heat above 60°C/140°F, incinerate, or expose the battery or its contents to water. Do not remove the battery from the hardware to recharge or for any other reason, including disposal. Do not solder directly to the battery cell. Do not use if battery appears damaged.
- This product includes capacitors and batteries which may present a potential fire, explosion, electric shock, or burn hazard. Do not touch or come into close proximity to any capacitors within this hardware.
- Keep this hardware between -40°C/-40°F to 60°C/140°F externally powered, -20°C/-4°F to 60°C/140°F discharging on battery, 0°C/32°F to 45°C/113°F charging. Failure to keep this hardware in the specified temperature range may result in safety risks.
Failure to follow mounting instructions may create risk of physical injury or property damage from falling objects. If mounting the hardware to a building wall, check for wiring or plumbing before drilling any holes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>