New Bee BH58 Wireless Headphones User Manual

New Bee BH58 Wireless Headphones

Product Information

The BH58 is a wireless headset with Bluetooth connectivity. It features a button for various functions, LED lights for status indication, and voice prompts for easy operation. The headset can be paired with a cellphone or a Bluetooth transmitter.

Product Usage Instructions

1. Pairing with a Cellphone:
2. Push the power button to the top and hold for 3 seconds to enter the cellphone pairing mode. The blue light will flash for 3 seconds, followed by alternating flashes of the red and blue lights.
3. Turn on the Bluetooth of your cellphone and search for “BH58” to connect.
4. When you hear the “connected” voice prompt, the pairing is successful. Note: If there is a connection record, the headset will automatically connect to the cellphone upon powering on.
5. Pairing with a Bluetooth Transmitter:
6. Push the power button to the middle position to enter the Bluetooth transmitter pairing mode. The blue light will flash for 3 seconds, followed by alternating flashes of the red and green lights.
7. Follow the pairing instructions of your Bluetooth transmitter to connect with the BH58 headset.
8. Button Functions:
   • Click once: Answer a call, hang up, reject a call, redial last phone number, activate voice assistant, or mute the microphone.
   • Press and hold for 2 seconds: During a call, click once to turn on/off the microphone. When not in a call, press and hold to turn the headset on/off.
   • Double-click: When not in a call, double-click to activate voice assistant.
9. Troubleshooting:
10. If you encounter connection problems, press and hold the volume + and MFB buttons simultaneously for 6 seconds to re-enter the pairing mode. You will hear the voice prompt of “dudu”.
11. If the Bluetooth transmitter encounters connection problems, press and hold the button for 3 seconds in the power-on state. The transmitter will re-enter the pairing mode with the indicator light flashing red and blue alternately.
12. Battery Information:
    • In charging: The red light stays on. When fully charged, the blue light stays on.
    • Charging time: Approximately 2 hours.
    • Low battery: Charge the headset in time to avoid disconnection. If the headset fails to turn on, charge it fully before turning it on. If the battery runs out or remains unused for a long time, there may be no signal lights at the beginning of charging, but the indicator will eventually show the charging status.

Thank you for choosing our product! If you are satisfied with your experience, please consider sharing with your friends. Follow us on [social media platforms] for updates and opportunities to participate in our product development process.

Diagram

Power On/Off

How to Connect The Bluetooth Transmitter

• Step 1: Push up the power button to turn on the headset.The headset indicator light is blue and flashes for about 3 seconds, and then turns into red and green light flashing alternately.
• Step 2: Plug the Bluetooth transmitter into the device.The indicator light of Bluetooth transmitter is blue and flashes for about 3 seconds, and then turns into red and blue light flashing alternately. You will hear the “Pairing” voice prompt, and the Bluetooth transmitter will automatically search and connect to the headset.
• Step 3: After the connection is successful, the headset indicator light flashes blue every 30 seconds, and the indicator light of Bluetooth transmitter is solid blue. When there is a connection record, the Bluetooth transmitter will automatically reconnect to the headset after powering on.

Note:
If the device does not work normally after the connection is successful, please check whether the sound settings of the device are selected correctly. Operation Steps: Open the ‘sound settings’ of the device, find ‘Playback and Recording Devices’, and select ‘BTD-Q2’.

How to Connect Your Cellphone

• Step 1: Push the power button up to the top, press and hold for 3 seconds, then release. The blue light flashes for 3 seconds, then the red and blue lights flash alternately. You will hear the “Pairing” voice prompt.
• Step 2: Turn on the Bluetooth of your cellphone, find “BH58” and click to connect. When you hear the ‘connected’ voice prompt, it means the connection is successful.

Note:
When there is a connection record, the headset will automatically connect to the cellphone after powering on. When both the headset and the transmitter have connection records, the transmitter will be connected first.

Answer/Hang Up/Redial Last Phone Number/Reject A Call/Voice Assistant/Microphone Mute

Volume Control/Music Control

Restore Factory Settings

Headset ：If you encounter connection problems during use, you can press and hold the volume + and MFB buttons at the same time for 6 seconds, the headset will re-enter the pairing mode, and you will hear the voice prompt of ‘dudu’.

Bluetooth Transmitter: If you encounter connection problems during use, please press and hold the button for 3 seconds in the power-on state. The Bluetooth transmitter will re-enter the pairing mode, and the indicator light flashes red and blue alternately at this time.

Charging Indications

1. In charging:Red light stays on. Fully charged: Blue light stays on.
2. Charging time: about 2 hours

Common Problems

1. Low battery may cause disconnection, in order not to affect normal use, please charge the headset in time.
2. If the headset fails to turn on, please try to charge it up first, and turn it on after fully charged.
3. If the battery runs out or has not been used for a long time, there may be no signal lights at the beginning of charging, but the indicator will normally light up in red after a few minutes.
4. No Sound from the headset:
5. Make sure the headset connects to the electronic device successfully.——Make sure the effective distance of headset and electronic device is within 10 meters in between.
6. Make sure you choose this Bluetooth device for music playback.——Make sure your electronic device is within a range of strong signal without external interference.
7. Check whether your electronic device has been connected to other Bluetooth devices.
8. The model of this headset can not be searched.
9. Make sure the headset is in the pairing mode you want (Phone/Blue-tooth Transmitter)
10. There may be a program error on the headset and device.Please reset the headset. (In the power-on state, press and hold the MFB and the volume “+” button for 6 seconds to restore the factory settings.)
11. No sound can be heard from the headset when in a call.
12. Make sure your headset and device are connected successfully.——Make sure the call is selected in the state of the Bluetooth device.

Safety Notes

1. Please use original accessories provided for this product, otherwise, it may cause low performance, headphone damage, or a short circuit, and all of these are out of our warranty support.
2. Disassembling personally may damage the headset and this is not covered by warranty.
3. Do not use the product in a dusty environment.
4. Please clean the headset with a clean, soft, and dry cloth.
5. Do not place the product in an extreme environment, otherwise, it may be temporarily unavailable for use. The normal use temperature is -10°C to 45°C.

Happy?

• Thank you for choosing our products! We sincerely hope it will be your new-found happiness.
• If you are fully satisfied with your using experience, could you please kindly share to your friends?
• We also engage with our fans to learn how we can do better by offering free pre-release products. If you are interested, do not hesitate to follow us on
  • Facebook: NewBeeBrand
  • Website : https://www.anewbee.com

Not Happy?

If you have any questions, concerns or just not satisfied with any regards, feel to contact us by e-mail at:

E-mail:support@anewbee.com
Tel : （USA）1-626-701-7623 （UK）07845854035
Address : 3rd Fl, Bldg E, Guanghao Ind., No. 23, Yunfeng Rd, Dalang St., Longhua Dist., Shenzhen City, Guangdong Prov., China
E-mail : support@anewbee.com
Website : www.anewbee.com

References

• anewbee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>