New Bee NB-Z4 Headphone Stand with Fast Wireless Charger User Manual

June 5, 2024
New Bee

Headphone Stand
with Fast Wireless Charger
User Manual
New Bee NB Z4 Headphone Stand with Fast Wireless
Charger

Welcome

Congratulations on purchasing our New Bee product. This guide includes instructions for the New Bee headphone stand with fast wireless charger. Before installing or using the product, please refer to the instructions found in the Start Guide for important product information.

Product Introduction

New Bee Headphone Stand with Fast Wireless Charger, and also for your mobile phone wireless charging. This product is made of high quality aluminum and is anodized. Compact and elegant, perfectly matched iMac, Macbook or any other Apple devices, provide you with a convenient, free and secure wireless fast charging experience Product Appearance

New Bee NB Z4 Headphone Stand with Fast Wireless
ChargerProduct Specification

Material: Aluminum (anodized) + TPU + ABS
Input: DC5.0V/2A, DC9.0V/1.8A(QC2.0, QC3.0)
Power: 5W I 7.5W I 10W
Charging distance: 4mm-10mm
Charging efficiency: 2>72%
Compatibility

  1. Headphone Size: The vertical size of the bracket from the top to the bottom is 9 inches, suitable for most headphones.
  2. Built-in Qi wireless charger mobile phones, such as iPhone 8/8 Plus, X,Xs/Xs Max, XR; Samsung S9,S9 edge,S8, S8 edge.
  3. Reserved wireless charging interface that needs to install the receiver coil phones, for example, Samsung Galaxy S5, S4, S3, Note4, etc.
  4. Need to install the device with a protective cover (iPhone6, iphone5, iphone6 / Plus, etc.)(Note: these receiving devices must be compatible with the WPC Qi standard to use)

Product Installation

New Bee NB Z4 Headphone Stand with Fast Wireless
Charger - figFunction Instructions

New Bee NB Z4 Headphone Stand with Fast Wireless Charger - fig
1

  1. Stand holder
  2. Supporting pole
  3. USB charging port
  4. Led light area
  5. Wireless charging area
  6. Base

1. Insert the USB cable into the charging interface and connect the external power supply, then place the device that needs to be charged on the charging area as below:
New Bee NB Z4 Headphone Stand with Fast Wireless Charger - fig
22. Led light display area: The charging interface is Micro USB, The charging voltage is 5V/1A, (QC2.0, QC3.0), and DC9V can be used as the power source. When you access to the power, the LED light shows red color. When the mobile phone is charging, the light will show blue color. the light turns back to red after full charge.

What’s in the box

1x New Bee Wireless Charging Stand
1x USB Charging Cable
1x User Manual
Attention

  • Keep the stand and device clean and tidy
  • When cleaning the stand, make sure that it is disconnected from the power
  • Keep away from water and other liquids

Happy?
Thank you for choosing our products! We sincerely hope it will be your newfound happiness.
If you are fully satisfied with your user experience, could you please kindly share to your friends?
We also engage with our fans to learn how we can do better by offering free pre-release products. If you are interested, do not hesitate to follow us on
Facebook: NewBeeBrand
Website: http://www.newbeeglobal.com/en
Not Happy?
If you are having any questions, concerns or just not satisfied with any regards, feel to contact us by e-mail at:
Email: service@lianchuangchina.com
**** Tel: 86-755-83219167
Address: Room408, 4th Fl, Unit B, Bldg B.
Minsheng Industry, Gao’feng Rd, Longhua District, Shenzhen City, Guangdong Province, China

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– – Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals