DASAN TMS3.0 Type A Global Vehicle Control Terminal Instruction Manual
- June 5, 2024
- DASAN
Table of Contents
TMS3.0 Type A GLOBAL
(Vehicle Control Terminal)
Installation Manual
version 4.0
This manual describes how to install the product. Read carefully this manual
before using this product and install the product according to the guidelines.
And after reading this manual, keep it well and, if the person in charge is
changed, be sure to hand over this manual to the successor and let he/she use
the product correctly. The content and image in his manual can be changed
without notice by reason of product’s function improvement or etc. The content
of this manual is protected by copyright. Therefore, do not change the content
of this manual without the permission of our company.
Copyright © 2020
Issued by
DASAN Networks
Revision history of document
Version
| Date|
Description
---|---|---
V1.0| 2019-02-19| Initial release
V2.0| 2019-07-01| 2nd release
- Type A removed LTE Connector
V3.0| 2020-09-14| 3rd release
- Add FCC/CE/IC requirement
- Iridium/GPS/WiFi Connector changed
- LED Specification changed
V3.1| 2020-09-16| 4th release
- Changed PMN
V3.2| 2020-10-20| 5th release
- Inserted information about Cell limited Temperature
V3.3| 2020-10-23| 6th release
- Inserted information about Battery Information
V3.4| 2020-12-28| 7th release
- Inserted Frequency information.
V4.0| 2021-01-13| 8th release
- Separated by type
Precautions in Product Handling
Read carefully the following contents before handling this product and use
this product correctly according to guidelines. And after understanding the
precautions well, keep this manual well and let the manager or user use this
manual before and after installing the product or before handling the product.
If the person in charge is changed, be sure to hand over this manual to the
successor and let he/she use the product correctly.
Caution & Warning
Installation Qualifying Condition
Only the person who is qualified for handling designated installation
equipment or only a skilled technician can install this product.
Prohibition of Product Disassembly
Disassembly of this product can cause loss of life and property by electric
shock, breakdown, malfunction, static electricity, etc. Do not disassemble,
repair, or remodel this product recklessly.
If repair is needed, call Helpdesk (+82-1588-7080).
Strict Observance of Operation Condition
This product normally operates in the condition described in the product
specification. However, if the product keeps operating in conditions that it
is close to the minimum or maximum value, the probability of loss of life and
property increases. Therefore, be sure to predict/check environmental change
that each condition range may not approach the minimum or maximum value, and
manage that the equipment operates in the median value of the operation
condition range.
Maintaining Cleanliness of Installation Place
Be sure to tidy up the product installation place before and after
installation, and do not leave working tools or components alone on the moving
path to prevent accidents.
System Overview
Enables real-time monitoring of equipment operating information and state
information in a remote place through mobile communication or satellite
communication, and, through the real-time monitoring, user, dealer, and
customer can raise the efficiency of equipment management.
Product Interface & Specification
This page describes the product interface and specifications.
3.1 Classification by Product
| Type-A| Type-B| Type-C|
Type-D
---|---|---|---|---
Satellite| | 0| | 0
LTE(2G/3G/LTE)| 0| 0| 0| 0
GPS| 0| 0| 0| 0
Wi-Fi/BT| | | 0| 0
100BASE-T1 (BroadR-Reach)| | | 0| 0
Tab. 3.1 TMS3.0 Classification by Product
3.2 Product Specification
Item
| Detail Function|
Remarks
---|---|---
Interface
INTERFACE| 1 x Mandatary Connector|
1 x Secondary Connector|
1 x GPS Antenna Connector|
LED Indicator
LEDs| |
Power
DC Input Voltage| 12/24VDC|
Consumption Power Internal Battery| Max 10.18W|
DC Input Voltage|
- TLI-1550 Cell X 3 (TADIRAN)
- Charger IC : BQ24259
- Max Discharge Current: 3A
- Charge Voltage: 4.1V
- (-0.060V/+0.040V/-40℃ ~ +85℃)
- Max Charge Current: 250mA
- *Charge IC Set: Limit 256mA
|
- Limited Temperature for Charger and Discharge: -20℃ ~ +50℃(±5℃)
Cell Surface Temperature when charged and discharge with Maximum current.
Physical Specification
Size (H x W x D)| 174 x 122 x 52.4mm|
Operation Temperature| -30 ~ +75℃|
Operation Humidity| 10 ~ 95% RH|
Storage Temperature| -40 ~ +85℃|
3.3 LTE/3G/2G Frequency Range
No.
| LTE Band| Duplex Mode| Uplink(MHz)|
Downlink(MHz)
---|---|---|---|---
1| 2| FDD| 1850-1910| 1930-1990
2| 25| FDD| 1850-1915| 1930-1995
3| 4| FDD| 1710-1755| 2110-2155
4| 7| FDD| 2500-2570| 2620-2690
5| 12| FDD| 699-716| 729-746
6| 13| FDD| 777-787| 746-456
7| 5| FDD| 824-849| 869-894
8| 26| FDD| 814-849| 859-894
9| 38| TDD| 2570-2620| 2570-2620
10| 41| TDD| 2496-2690| 2496-2690
- LTE Module: EG25-G
- Modulation : UL(QPSK,16QAM) / DL(QPSK,16QAM)
Tab. 3.3 TMS3.0 LTE Band
No.
| WCDMA Band| Tx (MHz)|
Rx (MHz)
---|---|---|---
1| 2| 1850-1910| 1930-1990
2| 4| 1710-1755| 2110-2155
3| 5| 824-849| 869-894
- LTE Module: EG25-G
- Modulation UL/DL(QPSK,16QAM)
Tab. 3.4 TMS3.0 WCDMA Band
No.
| GSM Band| Tx (MHz)|
Rx (MHz)
---|---|---|---
1| GSM850| 824.2-849.2| 869.2-893.8
2| GSM 1900| 1850.2-1909.8| 1930.2-1989.8
- LTE Module: EG25-G
- Modulation : GMSK(GSM/GPRS) / 8PSK(EGPRS)
Tab. 3.5 TMS3.0 GSM Band
3.4 Product Interface
1
| Item| FunctiOn|
Connector Type
---|---|---|---
GPS| GPS Antenna Connection| 5510-2573
2| Mandatary Connector| Power Alternator Key OnCAN Security Serial RX/TX Cold
Reset| DT13-12PA
3| Secondary Connector| CM Solenoid Digital Input 100BASE-T1 x 2 Serial RX/TX|
DTM13-12PA
Tab. 3.6 TMS3.0 Interface Specification
3.5 Product Antenna Specification..
Item
| Part No.| Connector Type|
Length [mm]
---|---|---|---
GPS| HGPS-AX-0108A-04| SMA-Male| 3320
Tab. 3.7 TMS3.0 Antennal Specification|
3.6 LED Specification
Item| Color| State| Interval|
Description
---|---|---|---|---
Power
(Key on)| Green| Blinking| 1000ms| Key On
Green| Lighting| | Engine On
Yellow| Lighting| | Internal Battery Charge & Under 50% Capacity
Yellow| Blinking| 500ms| Undefined Model
Red| Lighting| | Harness Failure
Red| Blinking| 500ms| Fault Code
Power
(Key off)| Yellow| Blinking| 1,000ms| Mbit Sleep (Sleep Vbat Event)
Yellow| Blinking| 1,000ms| Deep mode (Sleep Deep Event)
Yellow| Blinking| 1,000ms| Wake up (in Mbat Sleep status)
LTE| Red| Blinking| 500ms| LTE Module / USIM Fault
Yellow| Lighting| | Unregistered (Roaming Failed)
Yellow| Blinking| 1,000ms| Registering
Green| Lighting| | Normal – Standby
Green| Lighting| 500ms| Data Sending / Receiving
GNSS| Yellow| Lighting| | GPS Satellite is not sensed.
Green| Lighting| | Normal
Red| Lighting| | Antennal Non-Connection
Red| Blinking| 500ms| GNSS Module Fault
Tab. 3.8 TMS3.0 LED Specification
4. Installation Preparation
4.1 Installation Method
* Blue Colored Location: Screw Hole Installation*
Mounting Height: Under 2m (Wall installation in the CABIN)
The installation location of this equipment depends on the heavy
equipment model, and the distance from the person must be at least 20cm
when installing the product on the heavy equipment.
Screw Specification**
PN: S0504653 (M6X1.0X16)
Surface treatment: Black
Strength: 8.8
Material: SM45C/SM50C
FCC Compliance
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The antenna should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
IC Compliance
This device contains a license-exempt transmitter(s)/receiver that complies
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The antenna should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>