Genmitsu 60 Close loop Stepper Installation Guide

Genmitsu 60 Close loop Stepper

Welcome

• Thank you for purchasing the Upgraded Close-Loop Stepper Motor Kit for PROVERXL 4030 from SainSmart.
• For technical support, please email us at support@sainsmart.com.
• Help and support is also available from our Facebook group. (SainSmart Genmitsu CNC Users Group) Scan the QR code to find information.

Part list

Installation Guide

1. STEP 1: Remove the X-Axis and Y-Axis Drag Chain
   • Remove all Axis motor wiring, unscrew the X-axis drag chain and Y-axis drag chain fixing screws, remove the drag chain, and keep the screws for backup.
2. STEP 2: Remove X-Axis Motor
   • Loosen the top bolts and socket head cap screw on the motor-facing side of the X-axis coupling, remove the 4 X-axis motor screws for backup, and remove the X-axis motor.
3. STEP 3: Remove Z-Axis Motor
   • Loosen the top bolts and socket head cap screw on the motor-facing side of the Z-axis coupling, remove the 4 Z-axis motor screws for backup, and remove the Z-axis motor.
4. STEP 4: Remove Y1-Axis Motor
   • Loosen the top bolts and socket head cap screw on the motor-facing side of the Y1-axis coupling, remove the 4 Y1-axis motor screws for backup, and remove the Y1-axis motor.
5. STEP 5: Remove the Y2-Axis Motor
   • Loosen the top bolts and socket head cap screw on the motor-facing side of the Y2-axis coupling. remove the 4 Y2-axis motor screws for backup, and remove the Y2-axis motor.
6. STEP 6: The removal is completed as shown
7. STEP 7: Installation of X-Axis Motor
   • Install the close-loop stepper motor on the X-axis motor mount, use the disassembled X-axis motor fixing screws to lock the stepper motor, and tighten the socket head cap screws and the top bolt on the motor side of the coupling.
   • (If the screws are slippery, please use the spare screws in the kit to replace them)
8. STEP 8: Installation of Z-Axis Motor
   • Install the close-loop stepper motor on the Z-axis motor mount, use the disassembled Z-axis motor fixing screws to lock the stepper motor, and tighten the socket head cap screws and the top bolt on the motor side of the coupling.
   • (If the screws are slippery, please use the spare screws in the kit to replace them)
9. STEP 9: Installation of Y1-Axis Motor
   • Install the close-loop stepper motor on the Y1-axis motor mount, use the disassembled Y1-axis motor fixing screws to lock the stepper motor, and tighten the socket head cap screws and the top bolt on the motor side of the coupling.
   • (If the screws are slippery, please use the spare screws in the kit to replace them)
10. STEP 10: Installation of Y2-Axis Motor
    • Install the close-loop stepper motor on the Y2-axis motor mount, use the disassembled Y2-axis motor fixing screws to lock the stepper motor, and tighten the socket head cap screws and the top bolt on the motor side of the coupling.
    • (If the screws are slippery, please use the spare screws in the kit to replace them)
11. STEP 11: Installation of Drag Chain
    • Install the new drag chain by using the disassembled drag chain fixing screw.
12. STEP 12: Installation is completed as shown

Wiring

Buttons and Interfaces

• WARNING: Please check your voltage selection on the power supply unit before powering on Verify it is switched to the proper voltage for your region.

X/Y/Z Asix Motor Wiring

Limit Switch Wiring

Spindle Wiring

STEP 14: Adjusting Lead Screw

• Measure the distance Y1 and Y2 from both Y-axis sliders to the fixed plate at the motor end of the Y-axis, calculate the distance difference, and then unplug one of the Y-axis motors from the motor cable.
• Use the software to control the rotation of one of the Y-axis motors to adjust the distance of the Y-axis sliders to Y1=Y2.
• Email:support@sainsmart.com
• Facebook messenger:https://m.me/SainSmart
• Help and support is also available from our Facebook Group
• Vastmind LLC, 5892 Losee Rd Ste. 132, N. Las Vegas, NV 89081

Documents / Resources

| Genmitsu 60 Close loop Stepper [pdf] Installation Guide
60 Close loop Stepper, 60, Close loop Stepper, loop Stepper, Stepper
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>