VIVO PP-DK30B-1 Clamp on Desk Privacy Panel Instruction Manual
- June 17, 2024
- Vivo
Table of Contents
Black Clamp-on Pegboard Panel
Instruction Manual
PP-DK30B-1 Clamp on Desk Privacy Panel
SKU: PP-DK30B-1
Scan the QR code with your mobile device or follow the link for helpful
videos and specifications related to this product.
https://vivo-us.com/products/pp-dk12b
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY OPTIONS:
ASSEMBLY OPTION A: Above Desk Mounting
STEP 1
Connect Pegboard (B) to Supports (A) by installing M6x16mm Screws (S-A) and M6
Washer (S-B) through pegboard into threaded holes of Supports (A) using 4mm
Allen Wrench (T-A). This can be done in a portrait or landscape orientation.
See examples below. 
STEP 2
Install Clamp Pads (D) on the Clamps (A1) on Supports (A). Tighten Clamps (A1)
to attach to desired surface. Use Zip Ties (E) to secure cables along Supports
(A). 
STEP 3
Install accessories (C, F thru J) onto assembled pegboard.
Shelf (C,F)
Place Shelf Brackets (F) onto desired location on pegboard. Place Shelf (C)
onto Shelf Brackets (F).| Hooks (H)
Place Hooks (H) into desried pegboard holes.| Loops (G)
Place Loops (G) into desired pegboard holes.
Magnets
Clips (J) and Magnets (I) can be used as desired on pegboard.
ASSEMBLY OPTION B: Below Desk Cable Management
STEP 1
To mount belowdesktop, the Clamp on Supports (A) will first need to be
removed. The Clamp will be re-installed to the pegboard and used to secure
pegboard below desktop.
DISASSEMBLE SUPPORTS (A):
Remove M6x6mm Screws (A2) and M6x8mm Screws (A3) from Clamp (A1) to remove
Clamp Bolt (A4) using 4mm Allen Wrench (T-A). 
Next, remove M6x16mm Screws (A5) from underside of
Supports (A) using 4mm Allen Wrench (T-A) to separate Clamp (A1).
STEP 2
Connect Clamp Bolt (A4) to Clamp (A1) using previously removed M6x8mm Screws
(A3) and 4mm Allen Wrench (T-A). Connect Pegboard
(B) to front of Clamps (A1) using previously removed M6x6mm Screws (A2).
Secure Clamp (A1) to desktop surface.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CS T,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
help@vivo-us.com| AVG. RESOLUTION TIME (within
office hrs): < 15 M
---|---
www.vivo-us.com Chat live with an agent!| AVG.
RESOLUTION TIME (within office hrs): 5M 4S
309-278-5303| AVG. RESPONSE TIME
(within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Clamp-on Desk Privacy Panel – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>