KOFIRE UG-05 2.4GHz Wireless Gaming Headset User Manual
- June 9, 2024
- KOFIRE
Table of Contents
KOFIRE UG-05 2.4GHz Wireless Gaming Headset
LED Indicator Light Description
Basic Key Operation
-
Turn ON
Long press the headphone will turn on after blue LED stays on for 3 seconds. The headphone will enter the pairing mode. -
Turn Off
Long press the blue and green LED will stay on for 2 seconds, then go out, and the headphone will turn off.
Volume Adjustment
- Short press and to control volume
Music Selection
- Long press to skip to the next song.
- Long press to skip to the previous song
Play/Pause/Phone call
- Music Pause: Short press when in music playing.
- Music Play: Short press when in music pause.
- Answer Calls: Short press when a call coming in.
- Hang Up: Short press when on a call.
- Refuse to Answer: Long press when a call coming in.
- When Wireless is connected, double press -dial the last phone number in your call record.
Headphone Tum On Status
Long press, the headphone will tum on, and the blue and green LED will twinkle
alternaty. The headphone will enter pairing mode. Turn on the Wlress in your
cell phone and search for -UG-05″, click to connect. The blue LED wil stay on
indefinitely after connected successfully, and the blue LED will flash slowly
when music playing.
*Note: The colorful decoration LED light will tum on automatically after
the headphone turns on, and it can be turned off by key combination
Vibration Function Switch
In the power-on status, flip the vibration switch down, the vibration function will be turned on (the white LED stays on indefinitely), and the headphone will vibrate with the bass. The stronger the bass, the stronger the vibration. Flip the vibration switch upward to turn off the vibration (the white LED goes out), then you can listen to music and play games normally, the vibrating speaker will not work, and the music speaker will work normally.
Colorful Decoration LED Switch
After the headphones turn on, the colorful LED light wMI tum on automatically.
If you want to tum off the colorful LED light for saving battery or for other
reasons, short press the volume up and volume clown button slmultaneously to
tum the LED off. The coloriul LED can be restarted after turned off.
*Note: The coloriU LED light will not work while the headphone is in
charging or in wired mode.
Boom Microphone
Equipped with the long boom microphone for a better call experience. The long
boom mic is to enhance the call performance. During a call, if you want to
talk to others, or you don’t want to be heard by the person on the other end
of the phone, short press the mute button on the microphone to stop the mic
from working. When the mute is turned on, the headphone will beep. When you
need to resume the call, short press the mute button again.
Auto off and Long-distance Reconnect
The headphone will be disconnected automatically when out of the effective
range. When back to effective range within 5 minutes, it will auto-connect
with your phone. The headphone will turn off automatically if out of the
effective for range over 5 minutes.
Headset And Wireless Transmitter Overview
Charging Mode
When in a low battery, please charge it for around 3 hours with USB charging
cable The headphones will be turned off automatically while charging. Red LED
stays on indefinitely while in charging, and red LED goes out while fully
charged
Power Status
When the headphone is connected to the IOS device, the current power status of
the headphone will be showed on the upper right corner of the device screen.
Line-in Mode
Plug ln audio cable, the headphone turns off automatically, you can listen to
the music with the audio cable. You can use the built-In microphone or long
boom mic rophone. Also, you can tum on or off the vibration function by the
vibration switch. Note: when in line-in mode, the Wireless can’t be turned on.
You need to unplug the audio cable and tum on the headphone to use.
Wireless Transmitter LED Indicator Description
Power On
|
Red LED stays on indefinitely
---|---
Pairing Status
|
Green LED flashes quickly
Connection Succeeded|
Green LED stays on indefinitely
For the First Time Using
- Insert the Wireless transmitter into the USB port of the device, the device will automatically Install the driver, the name displayed on the device is: UG-05, and the default is device audio transmission, the transmitter enters the standby state with the red LED lighting on indefinitely.
- The Wireless device enters the pairing state after power on, long press the button on the Wireless transmitter for 2 seconds to enter the pairing status, and the green LED will flash quickly.
- The Wlrelass transmitter Is successfully connected with tha Wireless device, and the green LED will stay on indefinltely.
For the Second Time and Subsequent Using
Whan thara is pal ring Information of tha headphones on tha davlce, for the
second tlme using, tha Wireless transmitter will automatically connect back to
tha Wireless device.
Connect with Other Wireless Devices
Short press the transmitter button, the Wireless transmitter will be
disconnected with the current device with the red LED lighting on
indefinitely, and the Wireless device will be turned off. Long press the
transmitter button for 2 seconds to connect with other devices, the green LED
will flash quickly and stay on indefinitely after connected successfully.
Power On/Power Off
Insert the Wireless transmitter into the USB port of the computer and it will
automatically turn on./Unplug the Wireless transmitter.
Wireless Connection
Long press the transmitter button for 2 seconds, the Wireless transmitter
enters pairing status with the green LED flashing quickly, now it supports
listening to music, Wireless video playback, Wireless video calls, etc.
Wireless Disconnection/Clear Connection
Short press the Wireless transmitter button, and the red LED will stay on
indeflnitaly./ln any state, long press tha transmitter button for 8 seconds,
tha green and red light will stay on indefinitely.
Headphone Parameters Information
Proflles Supported | A20P/AVRCP/SMP/HFP |
---|---|
Receiving distance | 8-10M |
Sound Speaker Resistance | 320:1:15% |
Sounding Horn Unit | 40mm |
Vibration Speaker Resistance | 160±15% |
Vibration Speaker Unit | 30mm |
Frequency Range | 20 HZ—20K HZ |
Sensitivity | 108±3dB at 1K HZ |
Microphone Sensitivity | -42 ± 3dB |
Charging Voltage | DC5V |
Charging Current | 800mA |
Operating Voltage | 3.7V |
Operating Current | 26-120mA |
Wireless Transmitter Parameters Information
Input | US82.0 |
---|---|
Signal-to-Noise Ratio | >OOdB |
Frequency Range | 20HZ—20KHZ |
Transmission Range | 20M |
Operating Voltage | 5V |
Operating Current | 14mA—27mA |
Packing List
Packing List
1. Wireless HeadphO!ie| 4. Audio Cable
2. Boom Mlcrophor,e| 5. User Manual
3. Micro use charglr.g cable| 6. Wireless Transmitter
7.MicFoamCovet-|
Warm Tips
- Please charge the headphone with 5V 1A / 5V 2A charger, high voltage may damage the headphone.
- When the headphone has not been used for more than 3 months, it needs to be charged before use.
- When the headphone has not been used for a long time, we suggest you charge f.Nery 3 months to provide good protection for the battery
- We suggest you fully charge the headphone for the first time use.
Attentions
- Please keep or use the headphone at normal temperature, avoid direct sunlight.
- Please keep the headphone away from fire or other hot objects.
- Please keep the headphone away from damp places or submerged In liquid, keep dry
- Please don’t try to use other methods of charging other than the USB charging cable we provide.
- Please don’t disassemble, repair, or modify.
- Please pay attention to excessive clash, If any damage (like dents, deformation, corrosion, etc.), please tum to us for assistance by the contact information on the warranty caret
- If the headphone produces an abnonnal small, higher than nonnal temperature, color, or shape changes abnormally, please stop using and tum to us for assistance by the contact information on the warranty card.
Warning
- If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or the similar overheating environment.
- The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids.
- This product is not a children’s toy. Children under the age of 14 need to be accompanied by parents to use.
WARRANTY CARD
Warranty Description
Please keep the warranty card and valid purchase proof properly, show it
together when sending the product to repair. If you can’t provide the warranty
card or relevant purchase certificate, the calculation date of the product
warranty will be based on the product manufacture date.
Warranty Regulations
-
If you have any questions during using, please don’t hesitate to call 4008894883 for help.
-
Within one year from the purchase date, if the product with quality issue and the technical staff of Our company has confirmed that the issue occurs under normal use, we will provide free replacement services.
-
In the following cases, our company refuses to provide free warranty service, only provides maintenance services, free of labor costs, only charges for parts:
A. The product main part has been damaged due to incorrect operation, negligent use or irresistible reasons
B. The product has been dismantled or repaired without our company authorization
C. The headphone driver unit has been used at high volume, and the diaphragm is deformed due to debris or impact. The headphone cable is broken, crushed, immersed in water, the case is damaged, deformed, and some other man-made damage reason.
D. The original warranty card and valid purchase proof can’t be provided, and the purchase date is beyond the warranty period. -
The free service provided by this warranty card does not include product accessories, and other decorations, gift, etc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>