simfer М25 Desktop Electric Oven Instruction Manual

simfer М25 Desktop Electric Oven

DEAR CUSTOMER!

Thank you for choosing the Simfer household appliances.

Simfer represents the quality, reliability, and diligence in relation to the needs of the customers. We hope that you will enjoy the products of our company and continue to favor the Simfer appliances in future.

The Simfer ovens are the compact devices that can be placed in any kitchen, even the smallest one. Due to the various cooking modes, the oven will serve as a replacement for a full-size conventional oven. The functions of upper and lower heat, grill() and convection() will allow you to demonstrate your culinary abilities to the full extent and make your loved ones happy with the tasty and healthy recipes!

This product is manufactured at modern equipment without causing any damage to the environment.

It complies with the requirements of the provisions of the EU ‘Waste Electrical and Electronic Equipment’ Directive (WEEE).

NOTE
This operation manual is designed for several models, the availability of modesand functions may vary. All figures are schematic.

Please carefully read the manual, since it provides important instructions for safe installation, operation and maintenance. Please take care of the preservation of the operation manual for use in the future. When transferring this device to the new owner, do not forget to provide all the documents.

BEFORE STARTING

1. Carefully get the product and its accessories out of the box.
2. Remove all packaging materials and promotional stickers.
3. Carefully read the entire operation manual.
4. After transportation or storage at low temperatures itis necessary to keep the device at room temperature for at least 2 hours before switching on.
5. Wipe the product body with a damp cloth and allow it to dry.
6. Prior to connection, make sure that there are no damages and dents on the body and inside the internal chamber of the device. The door hinges shall function properly.
7. Insert the plug into the mains socket.
8. Be sure to keep on-site the warning labels, indicating stickers (if available) and the serial plate of the product on the body.

Absence of a serial number on the product automatically deprives you of the right to warranty maintenance.

POWER CONNECTION

• Your oven is designed for use in a 230V network at a frequency of 50Hz and a current rating of 16A. If these indications differ from those of your network, contact an authorized service center for the device connection.
• Connection of your device to the power circuit shall be made only using an individual socket with a grounding contact in accordance with the regulatory enactments. Consult a specialist if the socket with grounding contacts is not available at the place of location of the appliance.
• While switching for the first time, the oven must be heated at a temperature of 200 degrees in the well-ventilated premises for not more than 15 minutes. In this case, a slight fogging of the premises is possible due to burning of protective materials of the heating elements. This is normal occurrence and is not a manufacturing defect.
• In order to prevent overheating, an empty oven with maximum settings shall not be switched on for more than 15 minutes. It takes 8-10 minutes to warm up.

The manufacture shall not bear any responsibility for the damage to the device connected to the socket without the grounding contact.

OPERATION GUIDELINES

• The oven shall be used in accordance with the safety precautions. Its violation may cause injuries and damage to the device
• The oven is designed for cooking food in domestic conditions. Industrial or other improper use of the appliance shall be considered as violation of the conditions for proper operation of the device.
• Do not allow children and people with physical, sensory or mental disabilities to use the device.

The manufacturer does not bear any responsibility for damages caused by non- observance of safety precautions and operating procedures for the device!

SHORT CIRCUIT PREVENTION!

• The appliance must be connected to the socket with a grounding contact.
• Use an extension cable designed for the power consumption of the device. Inconsistency in the parameters can lead to short-circuit or fire of the cable.
• Do not pull the power cord in the doorways or near the heat sources. Make sure that the power cord is not twisted or bent and that it doesn’t touch the sharp objects, angles and furniture edges.
• Do not allow the connecting cable to be hooked by the appliance body since the cable insulation may melt. In the case of damage to the power cord in order to avoid risks, it must be replaced by an authorized service center.
• In the case of a malfunction, remove the plug from the socket or switch off the fuse.
• Unplug the appliance after use, and also during its cleaning or moving. Remove the power cord with dry hands, holding it by the plug, and not by the wire.

Accidental damage to the power cord may result in electric shock and malfunctions that are not covered by the warranty. The damaged electrical cable requires an urgent replacement in the service center.

INFLAMMATION PREVENTION!

• Distance ofthe oven to the walls, curtains and other temperature-sensitive materials should be atleast 20 cm. Itis advisable to use the oven on the table with a heat-resistant coating.
• Do not place the appliance on a soft surface, do not cover it with cloth or other materials during operation, do not use it to dry clothes and garment.
• It is forbidden to place the oven in various niches (shelves, cabinets) and build the oven into the furniture!
• Do not put the combustible or flammable objects in the oven. Do not open the appliance door if smoke has formed inside the device. Disconnect the appliance from the mains or switch off the appropriate fuse in the fuse block.
• When using the parchment paper, fasten it in the houseware before placing in the oven. Due to the air flow entering the device, the parchment paper can be raised, touch the heating element and flare up. To avoid this, put the baking case on the paper immediately. Use the parchment paper with the correct dimensions.

BURN INJURY PREVENTION!

• During operation of the oven, the temperature inside it is very high. Be careful when opening the oven door since the steam can escape from it.
• The oven is heating up during operation. Do not touch hot surfaces and keep children away.

These labels are located on the surfaces that are running very hot. When the oven is functioning, do not touch them.

HOUSEWARE

• When using ceramic and glass houseware, make sure that they are suitable for use in the oven. The houseware should be heat-resistant.
• Do not heat liquids and other products in the sealed containers, for example, in the closed bottles, since they can explode.

ELECTRIC OVEN FAILURE PREVENTION!

• The ventilation тopenings of the oven must be open. Insufficient ventilation may result in overheating of the device.
• It is forbidden to use the oven as a work surface or support for any objects.
• Do not insert any objects into the door hinges, preventing it from closing.
• Do not move the oven using its door handle. The door handle is not designed to carry the device and can get break off.
• When using the foil or parchment paper, make sure that they do not come into contact with the heating elements.
• Do not pour cold water into the operating chamber or accessories until the surface of the device has cooled down since it can be deformed due to the sudden change in temperature.
• It is forbidden to place objects (dripping pans, frying pans) on the open door of the oven.
• The device may only be transported in the original packaging and in a fixed vertical position.

Any malfunction of the oven shall be eliminated by the authorized service center.

COMPLETE SET

1. Control panel
2. Oven body
3. Door handle
4. Cooking chamber
5. Heating elements
6. Legs
7. Glass door
8. Switches
9. Round dripping pan (*)
10. Square dripping pan
11. Grill
12. Roasting jack (*)
13. Crumb tray (*)
14. Lamp (*)
    

TECHNICAL SPECIFICATIONS

(*) Available in some models

CONTROL PANEL

In the models with recessed switches (*), the modes can be set when the switch is pushed out.

Press and release the switch to push it out

It is possible to make the required settings now by turning left and right.

TEMPERATURE REGULATOR:

Turn the switch and select the desired temperature for cooking. The maximum cooking temperature is 250 C.

*MECHANICAL TIMER (:**

Turn the switch and set the required cooking time.
At the end of the operation, an audio signal will sound. If the timer switch is set to the “manual control” mode in the position ,the oven will be functioned permanently. Do not leave it unattended!

OPERATING MODE CONTROL:

Turn the switch and select the operating mode of the oven.

The oven has from 3 to 6 (*) operating modes. POWER

INDICATOR:
It lights up when the oven is switched on.

Note:
The oven functions only when the temperature, cooking time and cooking mode are set simultaneously. In this case, the power indicator lights up on the control panel and the light lamp(*) turns on in the oven.

OPERATING MODES

| Upper heating
---|---
| Lower heating
| Upper and lower heating
| Lower heating with convection()
| Upper and lower heating with convection()
| Grill()
| Grill with convection()
| Roasting jack(*)

PROGRAMMING USING THE DIGITAL TIMER (*)

This function allows to program the duration of cooking process.

POWER CONNECTION

When the device is first energized, the numbers “00” begin to flash on the screen. Flashing takes place once a second. The relay is not in transmission. Unless any button is touched, 00 numbers continue to flash. As time goes on, there is no increase in 00 numbers.

When the device is in standby mode, pressing only the minus or only the plus button does not perform any function.

TIMER MODE

While the device is in manual mode, timer mode is activated by pressing the “Plus” button. Timer adjustment is made between 1 minute and 4 hours by using the plus and minus buttons in the timer mode. Increasing and decreasing operations can be provided by holding down the buttons. After installation, the timer value on the screen counts down until it reaches ’00’.

The timer value set for 1 hour displayed on the screen as “lh” The timer value set for 2 hour displayed on the screen as “2h” The timer value set for 3 hour displayed on the screen as “3h” The timer value set for 4 hour displayed on the screen as “4h” As soon as the established value counts down and falls below 1minute, the remaining seconds value appears on the screen as 59, 58, 57 … seconds. When the timer expires and reaches 00, the alarm sound is activated, the relay stops transmission. The value 00 on the display also flashes in a coordinated manner with the alarm sound. Unless any button is touched, the alarm sounds for about 7 minutes. After 7 minutes, the alarm stops, but the numbers ’00’ continue to flash on the screen. When the plus and minus buttons are pressed at the same time, the flashing process stops and the relay turn on the transmission. If the plus and minus buttons are pressed together before the 7-minute period has expired, the alarm sound will be cut, ’00’ numbers will be fixed on the screen, the relay will be transmitted. If only the minus or only the plus button is pressed while the alarm is active, the alarm sound is cut off, the flashing operation continues.

ADJUSTMENT OF BUZZER TONE

When the device is in manual mode and the numbers ’00’ appear on the screen, the buzzer tone setting is activated by holding down the minus button for about 2 seconds. When the buzzer tone setting is activated, the currently active buzzer tone appears with a beep (t1,t2 or t3}. Then the buzzer tone changes (in order of tl, t2, t3, tl, t2 … } in order to each minus button pressing. To activate the selected tone, while the name of the buzzer tone appears on the screen, it is waited for 3 seconds without pressing any button or the tone is activated by pressing the plus button.
NOTE: During the operation of the device, a beep sounds at every valid key press.

IN THE CASE OF POWER OUTAGE

In the case of power outage, if the cooking mode is active, it will be interrupted. The timer will be displayed as 00; it will need to be set again.

COOKING FOOD

1. Place the dripping pan on the lowest level
2. Adjust the operating mode switch to the desired position.
3. Preheat the oven to the temperature specified in the recipe.
4. Set the timer to the desired time.
5. After warming the oven for 5 minutes, place the dish to be cooked into the oven. The weight of products that are placed on the dripping pan or grill must not exceed 3 kg. The products should be placed uniformly over the entire surface of the dripping pan, no side of which should be overloaded.
6. Check the dish doneness 5-10 minutes prior to the expected completion of the operation.
7. When the cooking process is over, adjust the timer to the position “O”
8. If the timer has been set for a certain time, then an audio signal will sound * after its expiration.

MAINTENANCE OF THE ELECTRIC OVEN

• Disconnect the device from the mains. The device can be very hot during its operation and for some time after its completion.

• Wipe the outer surface with a soft damp sponge. In order to prevent the surface from spotting, use the special agent for cleaning the metal surfaces. Apply the agent not to the surface of the oven, but to the sponge.

• Do not use brushes, metallic sponges, knives and other rigid items to clean the body, control panels, dripping pans and other parts of the oven.

• Do not use abrasive cleaning agents.

• Internal parts of the oven should be wiped with a soft cloth soaked in the soapy water.
  Wipe them with a damp cloth, removing the detergent residues. Dry thoroughly.

• Use special cleaning agents for washing glass surfaces.

• Do not clean the oven with steam.

• Do not use flammable substances (such as acid, solvent, gasoline, etc.) for cleaning the oven.

• No part of the oven is intended to be washed in a dishwasher.

CLEANING OF THE HEATING ELEMENTS

The oven must be completely cooled down. Gently wipe the heating elements with a soft damp sponge. Do not use cleaning agents.

The oven must be completely dry prior to switching on.

TROUBLESHOOTING

• Check if the power cord is plugged in the socket securely.
• Check the power supply in the mains.
• Check for damages to the power cord.
• If the problem persists, contact the service center.

REPLACEMENT OF THE OVEN LIGHT LAMP ( *)

In order to prevent electric shock, prior to replacing the light lamp, turn off the power of your appliance and make sure that the oven has cooled down.

Remove the protective glass by turning it as shown in the figure, and install the new light lamp with the same specifications.

Note: The failure of the light lamp is not a warranty case.

DISPOSAL OF HOUSEHOLD APPLIANCES

1. This product does not contain dangerous or prohibited substances. It complies with the requirements of the provisions of the EU ‘Waste Electrical and Electronic Equipment’ Directive.
2. This product is made of high-quality parts and materials that can be recycled and reused.
3. Do not dispose of your product with the household waste at the end of its service life. It is necessary to return it to the collection facility for processing waste electrical and electronic equipment.

Help to protect the environment and natural resources by recycling waste products.

For the safety of children, prior to disposing of this product, it is necessary to cut the power cable to prevent it from being switched on.

PACKAGING

The packaging materials of the device are made from recyclable material in accordance with our national legislation. Do not dispose of packaging materials together with the household and other waste. Please return them to collection facilities for packaging materials.

Country of origin – Turkey

Manufacturer:
«SER DAYANIKLI TUKETIM MALLARI IC VE DIS Tıcaret SANAYI ANONIM SIRKETI»,

Location address: 15 Temmuz Mahallesi, Bahar Caddesi NQ6, isyeri NQ42, Gunesli, Bagcilar, Istanbul, Turkiye

Address of the place of activity for the manufacture of products: Organize Sanayi Bolgesi 23, Cadde NQ 33, Melikgazi, Kayseri, Turkiye

Importer / Organization authorized to receive claims from the customers in Russian Federation: SIMRUS LLC, Tax ID 7717705825, State registration NQ 11177 46641891 Address: 5 Tkatskaya St., Build. 7, Floor 2, Moscow 105318.

Importer/Organization authorized to accept claims from buyers in Kazakhstan: Foreign Trade Company LLP, BIN 190940025588, Address: Republic of Kazakhstan, Almaty, Nazarbayev Avenue, 65, 519 office.

You can get information about service in your city by phone: 8-495-969-02-86, 8-495-969-02-87 (Russia), 8 (771) 748 20 21 (Kazakhstan) and on the website: / http/simfershop.ru/

Service life – 10 years
Warranty period – 12 months
Date of manufacture – indicated on the product

References

• Бытовая техника - купить, заказать с доставкой по всей России на официальном сайте | Simfer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>