simfer H10-20 Microwave Oven User Manual

H10-20 Microwave Oven
User Manual

H10-20 Microwave Oven

Dear Customer,
Thank you for relying on our products. We aim to allow you to optimally and efficiently use this environment-friendly product produced in our modern facilities under precise conditions with respect to sense of quality in total.
We advise you to read these operating manual thoroughly before using the mini oven and keep it permanently so that the features of the mini oven you have purchased will stay the same as the first day for a long time and serve in an optimum efficient way.
This product has been produced in modern environment-friendly facilities without adversely affecting nature. “Complies with AEEE Regulation.”

WARNINGS

This appliance is manufactured in accordance with the safety regulations. Operation against the rules cause harm both to the person and the appliance. Do not put any flammable, ignitable materials or material that may melt or deform due to the heat inside the oven against possible risks even when your appliance is not operated. Appliance is not designed to be set from remote or to be remotely operated.
Door surface may reach high temperatures when the appliance is operated.
Do not pour cold water to the tray or inside the oven while the surface of the appliance is still hot. Surface of the appliance may get damaged as a result of the sudden change in the temperature, and it may cause scaldings.
Long term intense use of the appliance may require extra ventilation, for example, opening a window, or a better ventilation, such as increasing the mechanical ventilation level. Put curtains, tulles, paper or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or flammable materials on or in the appliance.
Keep an eye on the children in the vicinity of the appliance.
This appliance is not intended to be used by people with physical, sensory and mental disabilities (including children) or those who have not adequate experience and knowledge regarding its use, unless they are under the supervision of a person responsible for the safety of the appliance. Appliance may be used by children above age of 8, persons with limited physical, perceptual or mental abilities or persons with a lack of experience and knowledge if they are supervised or given instructions on the operation of the appliance and any relevant risks they may be encountered. Children should not tamper with the appliance. Cleaning and user maintenance of the appliance shall not be performed by unattended children.
Appliance shall be very hot while it is being operated or after a short while when it is operated; do not touch heater surfaces, and let children to touch these surfaces. Keep the appliance and cord away from children under 8. Children shall be supervised to ensure that they do not play with the appliance.
This appliance is suitable for use at home and similar environments.
Do not apply pressure on the oven door with heavy objects when the door is open; do not lean, place heavy objects on the door or handle the appliance by holding its door.
Use your appliance for cooking and heating your meal only. Do not use your appliance for unintended purposes (heating the room, for commercial purposes etc.). Ensure that the appliance is unplugged before replacing the lamp of your appliance to prevent a risk of electric shock. The usage life of this product is 10 (ten) years.

ELECTRICAL CONNECTION AND SAFETY

Your appliance requires 16 Amps current.
Your appliance is designed for a power supply of 220-240V, 50/60Hz If your mains supply specifications are different from the specified values, contact qualified persons. Electrical connection of your appliance shall only be performed with earthed outlets installed as per the regulations. Contact authorized service if an earthed outlet is not available where the appliance shall be placed. Manufacturer is not responsible for damages caused by unearthed outlets.
If the mains cord (plugged cord) is damaged, this cord must be replaced by the importer or its service agent or an equally qualified personnel to prevent a hazardous situation.
Power cord of your appliance shall not come into contact with the hot components of the appliance.

EXPLANATION OF THE OVEN AND THE CONTROL PANEL

1. Control panel
2. Body
3. Handle
4. Cavity
5. Heating elements
6. Oven feet
7. Oven glass door
8. Control buttons

A. Function
B. Timer
C. Indicator Lamp
D. Temperature setting

TECHNICAL SPECIFICATIONS

Voltage: 220-240 V
Frequency: 50/60 Hz
Max.total power: 1500 W

USAGE OF THE OVEN

Insert the plug into a grounded socket. Set the timer to manual or automatic cooking. Adjust the thermostat to the appropriate temperature value according to the values in the cooking table. When the timer is set to the desired time, you will hear a warning sound at the end of cooking and cooking will end.
A slight smoke and odor may be emitted while the protective materials on the heating elements harden during the initial operation of your oven. This is a normal situation and not a manufacturing defect.
Defrosting:
Remove the material to be thawed from its container and place it on the grill. Insert the square tray so that the dissolved water flows down the grill. Thus, the products to be thawed will not be soaked in their own melting water. Do not use the melted water (for health reasons) and discard it.
You can use the defrosting feature as indicated in the cooking chart,
It is recommended to use ( ) functions during thawing.
Since thawing times vary depending on the weight of the product, check the defrosting from time to time. It is recommended to preheat your oven for 8-10 minutes before starting the cooking process. This oven has been produced for cooking at home only. Please do not use for other purposes.

A. Function
Allows you to select the oven functions. The functions are explained in the next section. Along with the function selector button, you need to set the oven thermostat button to a temperature value you have chosen. Otherwise, the function button you selected will not work.

| Only the lower heater is activated.
It is suitable for the pizza and the food desired to be browned from the bottom.
---|---
| Only the upper heater is activated. E.g; It is suitable for pastries, cakes, casseroles, muffins in the cooking moulds.
| The upper and lower heater is activated.
The food is heated from the top and bottom at the same time
It’s suitable for sponge cakes, pastries, muffins and casseroles.
| The upper and lower heater work with the Turbo Fan Motor.
Hot air is evenly distributed in the oven.
This function is ideal for sponge cakes, pastries, muffins and casserols.
| This function uses the lower heating element and Turbo Fan.
It’s suitable for cooking patisserie (Pastry).

B. Timer
Allows you to set the cooking time. When the time you set expires, the timer will cut off the electricity of the heaters and cooking zone and give a warning with a ringing sound. To turn off your device, set the timer, program and thermostat button to ‘0’. It will run indefinitely once it is put into position.
If it is desired to set the timer in less than 10 minutes, first of all, the timer button should be turned 90 minutes and then it should be brought to the desired time.
C. Temperature setting
It provides the temperature range in the oven. It is used with the oven programmer control button. When the temperature inside your oven reaches the value you set, the thermostat switches off and the thermostat light turns off. When the temperature drops below the set value, the thermostat is activated again.

OVERVIEW OF THE OVEN FUNCTION

ACCESSORIES

| Crump Tray
---|---
| Square Tray
| Grid
| Tray Holder

COOKING CHART

Information regarding the types of food that we have tested in our laboratories and determined the cooking values thereof are presented in the following table. Cooking times may vary depending on the mains voltage, the quality of the material to be cooked, the quantity and the temperature. It is possible that the dishes you cook using these values may not suit to your taste. You can set different values to get different tastes and results suiting your taste by making trials.

Preheat your oven for 10 min. before cooking.
There is no need to pre-heat when toasting your bread at function.

OVEN LAMP

Replacement of the Oven Lamp
WARNING: To avoid electric shock, ensure that the device circuit is open before changing the lamp.
(Open circuit means that the power is cut-off.)
Cut off the power supply of your appliance first, and ensure that the it is cooled down.
Remove the glass protector by rotating as shown in the figure.
Using plastic gloves may help you if you have difficulty in rotating it.
Then, remove the lamp by rotating it, and install the new lamp with the same specifications. Replace the glass protector, plug the appliance and complete the replacement procedure. You can now use your oven.

SUGGESTIONS FOR ENERGY SAVING

a) While the food is cooking, the oven door should not be opened frequently.
b) Always use the original accessories included in the manual for better results.
c) While cooking your food, preheat the oven if the recipe or the table in the user manual says to preheat.
d) Cook multiple dishes one after the other. The oven will not lose its heat. Turn off the oven a few minutes before the end of cooking. In this case, do not open the oven door.

TROUBLESHOOTING

If you determine an abnormal situation regarding your appliance, you can try troubleshooting based on the explanations in the table. If your appliance is not operating as intended, contact the Call Centre. You can find contact information from the web site.

blown, re-commission.
The mains voltage may have fluctuated.| Unplug and plug the appliance.
Vapour is emanated as the appliance is working.| It is normal to see vapour during
operation.| This is not a fault.
Metal sounds are heard when the appliance is heated.| Metal parts may expand and make sounds when heated.| This is not a sign of malfunction.
Oven is not heating.| No electricity.| Ensure the mains is operational and check the fuses in the fuse box. If required, re-commission the fuses.
For models that feature a timer, the timer may not be set.| Adjust the timer or switch it to the hand icon.
Function and/or temperature button may not be set.| Adjust the function and/or temperature button.
Oven light is not on.| No electricity.| Ensure the mains is operational and check the fuses in the fuse box. If required, re-commission the fuses.
Oven lamp may be faulty.| Replace the lamp.
Function and/or temperature button may not be set.| Adjust the function and/or temperature button.

MAINTENANCE AND CLEANING

• Unplug your device from the socket.
• Before cleaning your oven, make sure that all control buttons are turned off, that your device has cooled down and that the plug is unplugged.
• Do not use cleaning agents containing particles that may scratch the painted parts of the oven.
• Use cream or liquid cleansers that do not contain particles.
• As it may damage the surfaces; Do not use caustic creams, abrasive cleaning powders, coarse wire wool or hard tools. Clean up any spilled liquids immediately.
• You will get the best results if you clean the inside of the enamel oven while the oven is warm.
• Wipe the oven with a soft cloth dipped in soapy water after each use. Then wipe it once again with a wet cloth, then dry it.
• From time to time, it may be necessary to perform a complete cleaning using a liquid cleaning agent. Do not clean with dry and powder cleaners.
• Do not clean the inner parts of your oven, the door, the tray and other parts of the oven with tools such as hard brushes, cleaning wires or knives.

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT CONTROL REGULATION.
COMPLIES WITH AEEE REGULATIONS
This product was manufactured from recyclable and reusable high quality parts and materials. Therefore, do not dispose of this product with other domestic wastes at the end of its life cycle. Take it to a collection point for electrical and electronic equipment. You can ask your local administration about these collection points.
You can help protect the environment and natural resources by delivering the used products for recycling. Before disposing of the product, cut the power cord and render it non-functional for children’s safety.
PACKAGE INFORMATION
The product’s packaging is made of recyclable materials, in accordance with the National Legislation. Do not dispose the packaging waste with the household waste or other wastes, dispose it to the packaging collection areas specified by local authorities.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>