T PARTS TP170 Wireless Game Controller User Manual
- June 9, 2024
- T PARTS
Table of Contents
**T PARTS**
TP170 Wireless Game Controller
User Manual
FORTESLA
WIRELESS GAME CONTROLLER
USER MANUAL
TP170
KEY LAYOUT
PACKING LIST
INSTRUCTION
- Cable Connection Insert the cable to the front USB port in the console or glove box USB port. If the console port is USB-C (TypeC), you can use an OTG adaptor or Tparts USBhu b to convert. After connection, the HOME BUTTON RGB flash, and the game is ready to play.
Wireless Connection
a.) First pairing: Long press the HOME BUTTON 3-5 seconds to start the pair
mode , insert the dongle to the front USB port in the console or glove box
USB, click the button in the dongle to make the pairing happen. After
connection, the HOME BUTTON will be on still, and the game is ready to play.
Tips: HOME BUTTON RGB and dongle will both flash quickly on pair mode. If your
Tesla does not support data transmission function for front console USB ports.
Insert the dongle to the glove box USB port will work as well.
b.) Wake up and reconnect: When you need to wake up game controller in future
use. There is no need to repeat the pairing step. Short press the HOME BUTTON
for 1 second to reconnect.
Tips: HOME BUTTON RGB flash slowly on reconnect mode.
Bluetooth Connection On Other Device
Home+Y: Switch pair mode
Home+X: Android pair mode
Home+B: I0S13 pair mode
LED Mode
a.) Under power on condition: Double press the TURBO BUTTON to turn on/off the
LED mode.
b.) Under power on condition: Press the TURBO BUTTON and LEFT STICKER to
switch the LED color.
Power Off
a.)Long press the HOME BUTTON 3 seconds to power off the game controller.
b.)The game controller will automatically turn off when the host device is
off.
c.) The game controller will automatically turn off when not operating for 5
minutes .
Turbo And Auto Turbo Mode
a.) Set up single button turbo mode
Hold A/B/X/Y/L1/L2/R1/R2 and press the TURBO BUTTON once to set the turbo
mode;
Hold A/B/X/Y/L1/L2/R1/R2 and press the TURBO BUTTON twice to activate Auto
turbo mode;
Hold A/B/X/Y/L1/L2/R1/R2 and press the TURBO BUTTON three times to cancel
turbo mode;
Long press TURBO BUTTON 5 seconds to cancel single button turbo mode.
b.)Turbo mode speed control Level 1=5 clicks per second; Level2 =12 clicks per
second; Level3= 20 clicks per second. ( Speed control: Press TURBO and UP to
increase the speed by one level, or press TURBO and DOWN to decrease the speed
by one level )
Vibration Adjustment
Press the VIBRATION ADJUST BUTTON to adjust the motor. Motor vibration is adjustable to 5 levels :100%, 75%, 50%, 30%, off. (the default value is 30%). After successful adjustment, the motor vibrates for 0.5 seconds. Turn off and then turn on the game controller to memorize the most recent adjustment.
Trouble Shooting
a) Of a nygame bugs lead the ga me controller multifunction, turn off the game
controller and reconnect to wake up the game controller once again
b.)If
Charging And Endurance
a.) Under power off condition, HOME BUTTON flash in yellow when charging, LED
off when chargingcompleted
b.) Low battery alarm: HOME BUTTON quick flash in red.
c.) Play while charging: HOME BUTTON slowly flash in red, HOME BUTTON red
light keeps on indicates charging is completed.
d.) Full battery standby:25days
e.) Full battery in use: 8-10 hours
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part i5 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part i5 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>