VONROC CR502DC Tyre Mini Compressor 12V Instructions

MINI COMPRESSOR 12V
CR502DC

Original Instructions

|
---|---

SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings, and the instructions. Failure to follow the safety warnings and instructions may result in electric shock, fire, and/or serious injury. Save the safety warnings and the instructions for future reference.
The following symbols are used in the user manual or on the product:

| Read the user manual.
---|---
| Denotes risk of personal injury, loss of life or damage to the tool in case of nonobservance
of the instructions in this manual.
| Risk of electric shock.
|  Immediately unplug the 12V plug from the cigarette lighter socket in case the cord gets damaged during maintenance.
| Do not use in the rain
|  The product is in accordance with the applicable safety standards in the European directives.

GENERAL SAFETY WARNINGS

This section covers the basic safety instructions for working with the device.

Personal safety:

• Persons (including children) who lack the knowledge or experience to use the tool or whose physical, sensory or intellectual capacities are limited must never be allowed to
  use the tool without supervision or instruction by a person responsible for their safety.

• Children should be supervised to ensure they do not play with this device.

• Keep the device away from people – especially children – and pets.

• Within the work area, the user is responsible for damages incurred by a third party caused by the use of this device.

• Never aim the device at yourself or others during use, particularly eyes and ears. There is a danger of injury!

• Never clean your clothes with compressed air.

• Never leave the device unattended during operation and follow the inflating instructions of the inflatable.

• The inflatable may burst and cause serious injuries.

• Keep the device in a dry location, outside the reach of children.

Using the device:
CAUTION: How to avoid damage to the device and potential subsequent personal injury:

• Do not use the device whilst driving.

• Check the device for damage before use and only use in good working condition.

• Do not expose the device to rain or humid weather conditions and do not allow it to come into contact with water. There is a risk of electric shock!

• Keep all openings on the device clear during operation. Do not close the openings with your hands or fingers, and do not cover the device. There is a risk of overheating!

• Do not leave the device in the car in hot outdoor temperatures.

• The device could be damaged beyond repair.

• The device will heat up during operation. Touching hot surfaces poses a risk of burns.

• Do not allow sand, dust, or other small particles to enter the air intake or air outlet openings.

• Do not use the device near flammable liquids or gasses. Do not suction hot steam. Failure to observe these instructions poses a risk of fire or explosion!

• Switch off the device and unplug it from the cigarette lighter socket:
  – when the device is not in use;
  – when leaving the device unattended;
  – for cleaning or maintenance;
  – if the power cable is damaged;
  – if foreign objects enter the device or you notice unusual noise.

• Only use accessories supplied and recommend- ed by the manufacturer.

• Do not attempt to repair the device yourself.

ELECTRICAL SAFETY
CAUTION: How to avoid accidents and injuries from electric shock:

• Do not use the device if the switch cannot be switched on and off. Have a defective switch replaced.
• Do not carry the device by cable. Do not unplug from the socket by the cable. Protect the cable from heat, oil, and sharp edges.
• Operate only from a rated voltage of 12 volts (direct voltage). Higher voltage ratings will destroy the compressor.
• Make sure there is reliable contact between the socket outlet and the plug. Poor contact will lead to overheating and the risk of fire.
• Only connect the connection cable to the cigarette lighter socket in the car.
• Follow the instructions of your automaker on using the cigarette lighter socket.
• If the cable is damaged, immediately unplug it from the cigarette lighter socket.
• The connection cable on this device cannot be replaced.
• Dispose of the device if the cable is damaged.

MACHINE INFORMATION

Intended use
The device is intended to produce pressure in tyres (e.g. car and motorcycle tyres), balls, air mattresses and other small inflatable products. The car compressor is operated via a 12V cigarette lighter socket (car, mobile home, truck etc.).This device is not suitable for continuous operation to produce pressure over 3 bar. Any other use may damage the device and present a serious danger to the user. The manufacturer is not liable for damage caused by improper use or incorrect operation. This device is not suitable for commercial use. Commercial use will void the warranty.

TECHNICAL SPECIFICATIONS

• For optimal lifetime performance, do not operate device uninterrupted for more than 10 minutes; then wait for 10 minutes.

DESCRIPTION

The numbers in the text refer to the diagrams on page 2-4.
Fig. A

1. Manometer pressure gauge (not calibrated)
2. On/off switch
3. Power cable
4. 12V Cigarette lighter plug
5. Air hose
6. Clamping lever
7. Connection valve
8. Large valve adapter for inflatables
9. Small valve adapter for inflatables
10. Valve adapter for balls

OPERATION

First use
Fig. A

Do not cover the vents.
Do not operate the device in dusty environments. Doing so poses a fire hazard and could damage the device.

Place the product on a level, non-flammable sur- face. Depending on the inflatable you can use the connection valve (7) directly or along with one of the included valve adapters (8, 9, 10). For inflatables with counterpressure (e.g. partly filled car tyre): Switch on the product before connecting the connection valve (7) to the tyre.
This product is not suitable for continuous operation. It was developed to produce air pressure, not air volume. Do not use the product for longer than 10 minutes without interruption to prevent overheating and damage to the device. Afterward, allow cooling for a minimum of 10 minutes.

Connecting to the cigarette lighter socket Fig. A
**** Verify the socket of the cigarette lighter in your vehicle has an adequately sized fuse.

• Verify the product is switched off: on/off switch (2) to position ‘0’.
• Plug the cigarette lighter plug (4) into the socket of the 12V cigarette lighter. If you are unsure how to perform this, please consult the manual of the vehicle.

Connecting the connection valve without valve adapter Fig. A, B, C
**** Use a calibrated pressure gauge (e.g. at a petrol station) to check the required tire pressure. It is imperative to read the information in the vehicle’s owner manual concerning the inflation of tires.

1. Open the connection valve (7), and the clamping lever (6) will be in position as shown in figure B1.
2. Insert the open connection valve (7) into the valve of the inflatable (if necessary, first remove the valve cover of the inflatable).
3. Hold the connection valve (7) and close it: push the clamping lever (6) towards the connection valve (7).

Connecting the connection valve with valve adapt­ er Fig. A, B, D
Take care, not to over-inflate footballs, they might burst.
Given the material composition of inflatable mattresses, inflatable boats, etc., the air pressure cannot be indicated exactly. Take care therefore not to over-inflate such items or they might burst.

1. Open the connection valve (7), and the clamping lever (6) will be in position as shown in figure B1.
2. Push the respective valve adapter (8, 9, 10) into the opening in the connection valve (7).
3. Secure the valve adapter (8, 9, 10) by closing the connection valve (7): push the clamping lever (6) towards the connection valve (7) as shown in figure B2.
4. Insert the valve adapter (8, 9, 10) into the valve on the inflatable (if necessary, first remove the valve cover of the inflatable).

Switching on / off Fig. A

• Switch the device on/off switch (2) to position ‘I’.
• Once the desired filling pressure has been reached, switch the device off: on / off switch (2) to position ‘0’.
• Remove the cigarette lighter plug (4).

Removing the connection valve Fig. A, B

• Connecting without valve adapter: Open the clamping lever (6) for the connection valve (7) and remove it from the valve of inflatable.
• Connecting with valve adapter: Remove the valve adapter (8, 9, 10) from the valve of the inflatable. Open the clamping lever (6) of the connection valve (7) and remove the valve adapter (8, 9, 10).

Note: Air may escape from the valve of the inflatable when removing the connection valve (7). Be sure not to remove the connection valve (7) too quickly. It may be necessary
to add extra pressure to the required pressure, to compensate for the escaped air.

Reading the filling pressure
**** The manometer pressure gauge (1) is not calibrated. Therefore seek a specialist facility with a calibrated device after inflating inflatables where incorrect pressure can be dangerous (e.g. car tyre).

The filling pressure can be read on the manometer pressure gauge (1).

• The black scale indicates the pressure in the bar.
• The red scale indicates the pressure in psi.

Note: The device does not need to be connected to the cigarette lighter to test air pressure. Connect the connection valve (7). Read the air pressure on the display of the manometer (1). Remove the connection valve (7).

MAINTENANCE

Before cleaning and maintenance, always switch off the machine and unplug the 12V plug from the cigarette lighter socket. Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moistened with soapsuds.
Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.

Overload fuse
In the event of overuse or malfunction, the overload fuse in the cigarette lighter plug (4) will trip to protect the device. Replace the fuse after resolving the reason for the fuse tripping.

1. Unscrew the tip of the cigarette lighter plug (4)
   and remove the overload fuse.

2. Insert the new overload fuse and screw the tip of the cigarette lighter plug (4) back on.
   **** Never use a fuse with a higher tripping current. Otherwise, this poses a fire hazard!

ENVIRONMENT

**** Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.

Only EC countries
Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/ EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this guarantee:

• Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
• Normal wear and tear;
• The tool has been abused, misused, or improperly maintained;
• Non-original spare parts have been used.

This constitutes the sole warranty made by the company either expressed or implied. There are no other warranties expressed or implied that extend beyond the face hereof, herein, including the implied warranties of merchantability and fitness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealer’s remedies shall be limited to the repair or replacement of nonconforming units or parts.

The product and the user manual are subject to change. Specifications can be changed without further notice.

DECLARATION OF CONFORMITY
CR502DC ­ PORTABLE COMPRESSOR

We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European Parliament and of the Council of 8 June on the  restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:

EN ISO 12100, EN 60204­1, EN 61000­6­2, EN 61000­6­4, 2014/30/EU, 2006/42/EC, 2012/19/EU, 2014/30/EU

©2021 VONROC
WWW.VONROC.COM
2105-10

References

• VONROC Gereedschap & Tuin artikelen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>