VISUAL COMFORT LR 2910 Fascio 24 Inch LED Sconce Instruction Manual
- June 4, 2024
- VISUAL COMFORT
Table of Contents
ASSEMBLY INSTRUCTION
COMFORT LR 2910 Fascio 24 Inch LED Sconce
Instruction Manual
LR 2910 Fascio 24 Inch LED Sconce
TO assemble Safety cables:
- Join fixture safety cables with safety cable from the wall.
- Wrap both safety cables around the cable lock nut.
- Insert screws into both holes on the cable lock nut, and secure screws with a screwdriver.
- Push the cable lock nut into the outlet box.
Fascio 24″ Sconce
Item # LR 2910
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED
ELECTRICIAN.
WARNING***SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT THE ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IT. IF THERE IS ANY
DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.
ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
-
Carefully remove all parts from the box.
-
Remove the mounting plate (B) from the fixture (E) by loosening screws (D).
-
Install the mounting plate (B) to the outlet box and secure it with screws (C).
-
Connect the hot wire (BLACK) from the fixture to the hot wire from the outlet box (BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape.
-
Connect the neutral wire (WHITE) from the fixture to the wire from the outlet box (WHITE).
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED. -
Connect the ground wire from the fixture (bare copper) to the ground wire from the outlet box. IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.
-
Install the fixture (E) to the mounting plate (B) and secure it with screws (D).
-
Installation is complete, turn on the power at the fuse or circuit breaker.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>