HPRT MT866 Portable Printer Wireless Bluetooth Connection User Guide

: June 16, 2024
: HPRT

Table of Contents

Quick Start Guide
- MT866
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide

MT866

Manufacturer: Xiamen Hanin Electronic Technology Co.,Ltd.
Add: No.96, Rongyuan Road, Tong’an District, Xiamen, China, 361100
E-mail: support@hprt.com
Web: www.hprtprinter.com

Packing List

Printer Thermal Bracket

USB Cable Protective Case

Thermal Paper Quick Start Guide

Appearance and Components

Front View

Power Button
Top Cover
Right Cover Opening Button
Paper Inlet
Left Cover Opening Button
LED Indicator

Left View

Connection Status Indicator
USB Type-C Interface

Inner View

Left Out-of-paper Sensor
Right Out-of-paper Sensor
Right Paper Position Sensor
TPH
Left Paper Position Sensor
Thermal Bracket

LED Indicator

White LED indicator is lighting: Printer is turned on.

Green LED indicator is lighting: Printer is in charging mode, and green LED indicator will be off when fully charged.

Red LED indicator is flashing: Printer cover is opened.

Note: For more LED indicator and buzzer status, please contact customer service by email.

Print Self-test Page

In the turned on state, loading the thermal paper, press the power button 3 times to print a self-test page of the printer.

Power On

Hold down the power button for 3 seconds to turn on the printer.

To turn off the printer, also hold down the power button for 3 seconds.

Paper Loading

Put the thermal paper into the paper inlet in parallel with the thermal side down.
The printer will feed a distance automatically after detecting the paper.

Thermal Side Down

Note: If the buzzer sounds once when paper feeding stops, it shows that the paper is loaded successfully. If the buzzer keeps beeping and the red LED is flashing, please open the cover and reload the paper.

Printing from Mobile Phone

1. APP Download
Scan the QR code to download the APP.

2. Connect with the printer

(1) Open App, click “Connect printer”, and “Connect” with “HPRT MT866-XXXX”(XXXX are last four digits of Bluetooth address);
(2) If the APP can’t find the printer, please open “Settings”-“Bluetooth” on your phone and connect with the printer first, and then return to APP and click “Connect”.

3. Print

(1) Open the document you want to print, and copy/share it to APP. (Or click “Documents” on Home to choose the document.)
(2) Adjust it in Print preview, and click “Print” to print it.

Printing from Computer

Connect one side of the USB cable to the computer and the other side to the printer;
Turn on the printer;
Download the printer driver from the website: www.hprt.com/HPRT-MT866 And then install it on the computer;
Choose the document you want to print and print it via printer “HPRT MT866”.

Battery Charging

When the printer is in low power, the green LED indicator will flash. Please use matching USB cable to charge in time. If you continue printing, the printer may shut down automatically.

(1) Charging by computer

(2) Charging by adapter

Precautions

The best operating temperature is 0°C~40°C, if the environmental temperature is too low or too high, the print quality may be affected.
Please do not use the unofficial paper to ensure the print quality.
During printing, the area around the print head is very hot. Do not touch it to avoid burns.
Do not pull out paper by force during printing, or else it may damage the printer.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com munications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

FCC ID: 2AUTE-8TT22G

Please Scan QR Code to Get 24h After-sales
Technical Support Service

Search “HPRT Official “on YouTube to
Get Instruction Videos

HPRT YouTube Website

Search “HPRT Official “on Facebook to
Get Extra Consumables of Printer

HPRT Facebook Website