BORMANN BWR6800 7 Drawer Tool Carrier Instruction Manual
- May 15, 2024
- BORMANN
Table of Contents
BORMANN BWR6800 7 Drawer Tool Carrier
Product Information
Specifications
| Model | Material | Steel Thickness | Drawer Size | Handle Dimensions | Casters |
|---|---|---|---|---|---|
| BWR6800 | Cold rolled steel | 0.5 mm for drawers, 0.7 mm for cabinet | 2 – 511 x | ||
| 278 x 51 mm, 5 – 511 x 278 x 106.5 mm | 61.6 x 33 x 85 cm | 4 x 1 PP casters, 2 |
swivel & 2 rigid with side brakes
(Casters not pre-installed)
Main Parts
- Handle
- Rigid caster (x 2 pieces)
- Swivel casters (x 2 pieces)
- Washers for handle (x 4 pieces)
- Spring washers for handle (x 4 pieces)
- Bolts for handle (x 4 pieces)
- Hex bolts for casters (x 16 pieces)
Product Usage Instructions
Assembly Instructions
Refer to Fig. 2 for detailed assembly instructions.
Installation of Casters
- Attach the rigid casters to the designated corners of the unit using the provided bolts.
- Attach the swivel casters to the remaining corners using the same method.
- Ensure all casters are securely attached before moving the unit.
Drawer Assembly
- Slide the drawers into their respective slots in the cabinet.
- Ensure the drawers are aligned properly and slide smoothly.
- If necessary, adjust the position of the drawers for proper fit.
FAQ
-
Q: Are the casters pre-installed on the unit?
A: No, the casters are not pre-installed. You will need to attach them using the provided hardware. -
Q: What is the material used for the construction of the unit?
A: The unit is constructed from cold rolled steel with different thicknesses for drawers and the cabinet.
PARTS LIST
- Handle
- Rigid caster (x 2 pieces)
- Swivel casters (x 2 pieces)
- Washers for handle (x 4 pieces)
- Spring washers for handle (x 4 pieces)
- Bolts for handle (x 4 pieces)
- Hex bolts for casters (x 16 pieces)
Technical Data
- Model: BWR6800
- Material: Cold rolled steel
- Steel thickness: 0.5 mm for drawers, 0.7 mm for cabinet
- Drawer size:
- 2 – 511 x 278 x 51 mm
- 5 – 511 x 278 x 106.5 mm
- Handle: Steel
- Dimensions: 61.6 × 33 x 85 cm
- Casters: 4″ x 1″ PP casters, 2 swivels & 2 rigid with side brakes (Casters not pre-installed)
ASSEMBLY
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
- Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
The instructions manual is also available in digital format on our website www.nikolaoutools.gr. Find it by entering the product code in the Search field.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>