5342 eta 5342 Multi-purpose clipper Instructions

5342 eta 5342 Multi-purpose clipper

INSTRUCTIONS FOR USE

SAFETY WARNING

•  Before the first use, read the instructions for use carefully, look at the picture and keep the instructions for use.

•  Check whether the data on the type label correspond with the voltage in your socket.

•  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

•  Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the charger from the power socket!

•  Do not leave the iron plugged in power supply without supervision!

•  If the power cord of the charger is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.

•  Never use the appliance if its charging adapter is damaged, if it does not work properly, if it fell down and was damaged and it is leaking. In this case take the appliance to a special service to check its safety and proper function.

•  Never use the appliance if it does not work properly, if it fell down and was damaged or if it fell to water.

•  The appliance is intended for use in households only and for similar use! It is not
  designed for use in hair salons or for other commercial use!

•  Do not put or take out the plug to or from a socket with wet hands!

•  Do not let the appliance in operation without supervision!

•  Never immerse the appliance in water or other liquids (even partially) and do not clean it in running water!

•  Use only the accessories designed for this type. Do not use damaged adapters.

•  Never tuck the appliance or the accessories into any body holes.

•  Be careful in using the appliance without a set adapter, the blades are sharp.

•  Do not use the appliance while having a bath, having a shower or taking a sauna and for trimming wet or artificial hair.

•  The appliance is not intended for styling animal hairs.

•  Never charge the appliance in direct sunlight or close to heat sources and if the temperature is below 10 °C or above 40 °C. If the appliance is fully loaded (all the control lights are permanently on), unplug the charging device.

•  Do not put the trimmer on hot heat sources (e. g. oven, stove, radiator, etc.).

•  The trimmer and the stand with the plugged adapter must not be used at places where it could fall into a bath tub, a wash basin or a swimming pool. If the dryer fell to water anyway, do not take it out! First of all, unplug the adapter from the socket and only then remove the trimmer. In this case take the appliance to a special service to check its safety and proper function.

•  If the dryer was stored at lower temperatures, acclimatize it first, by which you remove stiffness of the lubricating fat in bearings and mechanical resistance of the plastic parts will be maintained.

•  Also, do not put the trimmer in the on position on soft surfaces (e. g. bed, towels, sheets, carpet); the surfaces or the appliance could get damaged.

•  The power cord of the adapter must not be damaged with sharp or hot objects, open fire and it must not be sunk into water.

•  If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid standards.

•  The adaptor supplied with this appliance is intended for this appliance only, do not use it for other purposes. Also, use only the supplied adaptor with this appliance, do not use any other adaptor for charging (e.g. from another appliance).

•  During normal operation, the accumulator batteries are not taken out. Take out the batteries only if the appliance is to be disposed (see par. V. ENVIRONMENTAL PROTECTION).

•  Never use the appliance for any other purpose than for the intended purpose described in these instructions for use!

•  Do not insert the tip (4) further than 5 mm into the ear as this could causedamage to the eardrum (nor in the nose).

•  The producer is not responsible for any loss caused by improper handling of the appliance and its accessories (e. g. injury, appliance damage, fire, etc.) and its guarantee for the appliance does not apply in the case of non-compliance with the safety instructions above.

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

1.  ON/OFF switch
2.  Big brush attachment
3.  Small brush attachment
4.  Attachment for trimming hairs in nose and ear
5.  Shaving attachment
6.  Attachment for trimming hair and facial hair (11-20mm + 0.5-2.5mm)
7.  Charging indicator
8.  Charging adapter
9.  Stand
10.  Cleaning brush
11.  Blade lubrication oil

INSTRUCTIONS FOR USE

To Charge/Recharge

• Fully charge Clipper before using for the first time or after non-use for a long period of time.
• Battery performance is best if you recharge only when the battery is (almost)completely empty.
• Charging or recharging at temperatures below 4°C or higher than 35°C adversely affects the lifespan of the battery.
• Continuously recharging Clipper will reduce the lifespan of the battery.

1.  Be certain Clipper is OFF.
2.  You may charge the Clipper:
   • By inserting the clipper plug directly into the Clipper.
3. Plug charging plug into any 240V AC outlet. Use only the cord provided
4. After a few moments. the green Charging Indicator Light on the power plug will light to indicate the Clipper is charging.
5. It will take approximately 8 hours to fully charge the Clipper for a cordless trimming time of up to 60 minutes.
6. Before using your Personal Clipper for the first time, charge the unit for 14-16 hour for optimal performance:
7. Disconnect the cord and unplug from the electrical outlet

Optimize the working life of the battery

• After the Clipper has been charged for the first time, do not recharge the Clipper trimming sessions. Continue using it until the battery is completely empty.
• Do not charge for more than 24 hours.
• Do not keep cord permanently plugged in.
• Discharge/ run down the battery completely twice a year by letting the motor run until it stops.
• If the Clipper hasn‘t been used for a long period of time, it must be recharged for a full 10 hours.

How to Use

1. Select an attachment that best fits your personal grooming needs.
2. Place attachment atop Clipper Body. Secure by carefully inserting and turning the attachment in a clockwise direction (NOTE: attachment is secure when the arrow aligns with circle).
3. To remove the attachment, follow Step (12) in reverse order.
4. Slide ON/Off Switch upward to power the Personal Clipper.
5. The Adjustable Comb Attachments(3) is to be used with Precision Trimmer,while the Adjustable Comb Attachment (2) is to be used with Full-Size Trimmer Heads. To add, align the Comb side rails with slots of the trimmer head. Secure Comb by sliding downward, away from blade head. (NOTE: a clicking sound means the Comb attachment is secure and ready for use).

Hair clipping

• Before you start clipping, make sure that the head of the person whose hair you are cutting is at the same level as your chest so that all parts of his/ her head are clearly visible and within easy reach.
• Only use the clipper on dry hair.
• Do not use on freshly washed hair.
• Before you begin, comb the hair in the direction of growth.
• To achieve optimal clipping results, always move the clipper slowly through the hair against the direction of hair growth.

Clipping with hair comb attachment

1. Put the hair clipper comb on the full-width trimmer attachment and push until you hear ‚click‘ into place.
2. Press the Hair Length Selector and slide it to the desired setting.
3. When you are clipping for the first time start at the maximum clipping length setting to familiarize yourself with the clipper and prevent accidentally trimming hairs too short. As you become familiar with the settings, adjust the Hair Length Selector to desired trimming length. The selector will ‚click‘ into position at each setting.
4. Make sure that the flat part of the comb is always in full contact with the scalp to obtain an even result.
5.  Move the clipper slowly over the crown from different directions to achieve an even result.
6. Always move the clipper in the direction of hair growth.
7. Make overlapping passes over the head to ensure that all hair that should be cut has been cut.
8. Turn the Clipper off and remove the hair comb often to blow and/or shake out hair that has accumulated.

Contouring without the hair clipping comb attachment

1. Remove the hair comb. Be careful when you are clipping without comb attachment as when the clipper is turned on it will trim every hair it touches.
2. Tilt the clipper in such a way that only one edge of the trimming attachment touches the hair ends when you shape the contours around the ears.
3. To contour the nape of the neck or hairline, turn the clipper and hold it with the trimming attachment pointing downwards.
4. To contour the sideburns, turn the clipper and hold it with the trimming attachment pointing downwards.

Trimming

•  Make sure hair is clean and dry.
•  Always comb the hair with the styling comb in the direction of growth before you start trimming.
•  Do not move the Clipper too fast. Make smooth and gentle movements.

Trimming Nose Hair

1.  Make sure nasal passages are clean.

2.  Place nose, ear and eyebrow attachment on Clipper.

3.  Switch the Clipper on and insert the tip of the attachment into one nostril.
   CAUTION: Do Not insert the tip more than 5mm into your nostril.

4.  Slowly move the tip in and out while turning it around at the same time in order to remove unwanted hair. For best results, make sure the side of the tip is firm against skin. This will reduce the tickling effect that can occur during the trimming of nose hair.

5.  Turn off, Clipper. Wipe the attachment clean after each use.

Trimming Ear Hair

1.  Clean outer area of ear and ear canal. Make sure it is free of wax.

2.  Nose, ear and eyebrow attachment should be on the Clipper.

3.  Switch the Clipper on and move the tip softly around the edge of ear to remove hairs extending beyond the outer ear.4) Carefully insert the tip into outer ear canal. CAUTION: Do not insert the tip further
   than 5 mm into the ear as this could cause damage to the eardrum.

4.  Turn off, Clipper. Wipe the attachment clean after each use.

Trimming Eyebrow

1.  Nose, ear and eyebrow attachment should be on Clipper

2.  Switch the Clipper on and use the tip to cut individual eyebrow hairs.

3.  The Clipper can be used for clipping single long hairs.

4.  Put the Clipper at the root of the hair and move it along the edge of the eyebrow from the base of the nose towards the outer tip of the eyebrow in the direction of hair growth.
   IMPORTANT: Do not use the Clipper to define or trim the entire eyebrow. Do not try to trim your eyelashes. Be careful not to get too close to your eyelashes and eyes!

5.  Turn off, Clipper. Wipe the attachment clean after each use.

Shaving With Micro Shaver Attachment

1.  Put the micro shaver attachment on the clipper.
2.  Use the narrow micro shaver to shave along contoured edges to remove any stubble while creating a smooth welldefined beard line. Before using the micro shaver, always check it for wear and damage. If the micro shaver shows signs of wear or damage, do not use it as injury may occur. Do not use the micro shaver until it has been replaced. Gently press the micro shaver onto the skin. Do not press too hard.

Trimming facial hair

1.  Wet facial hair slightly and brush it before trimming.
2.  Mark a facial hair line with the trimmer and cut off the hairs exceeding this line from the outer perimeter
3.  If you want to achieve an even trim of facial hair, use one of the attachments (6) or trim carefully the ends by small pieces over the brush in such a way that the brush moves through the hair upwards. Repeat the process in the whole facial hair area.
4.  After trimming shave the parts around the beard in a usual way.

Trimming a mustache

1.  Wet mustache slightly and brush it before trimming.
2.  Trim carefully over a brush to achieve an even cut of the mustache. If you prefer using your finger as a guide, proceed accordingly.

MAINTENANCE

Turn off the appliance before each maintenance, or unplug the adapter from the electric socket! Do not use rough and aggressive detergents! Wipe the trimmer surface with a wet soft cloth.

Cleaning blades
Clean the blades with an enclosed brush. If the blades are very soiled, you can remove the whole trimming head from the trimmer (figure 5) and clean it in running water. Also, clean the area below the removed trimming head. After drying, put the head with the blades back to the trimmer in the opposite way (you will hear a clicking sound). In order to keep the trimmer in perfect condition, you have to lubricate the list with blades using one or two drops of oil for sewing machines (figure 5). Do not use hair oil, petroleum jelly or oil mixed with petrol or any other solvent because after evaporation the solid parts of the lubricant could slow down the operation of the blades. Insert the trimming head to the trimmer properly, turn on the trimmer and then turn it off and wipe out the excessive oil from the blades.

Storage
Put the trimmer with the accessories back to the original package at a dry and dust free place, out of reach of children and incapacitated people.

ENVIRONMENTAL PROTECTION

If the dimensions allow, there are marks of materials used for the production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be received free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authorities or at a collection site. Fines can be afflicted for improper disposal of this type of waste in agreement with the national regulations. The appliance is equipped with rechargeable NiMH batteries with long life. For environmental protection, it is necessary to dismantle discharged batteries after the end of life of the appliance. Dispose of the batteries in a suitable and safe way through the special collection networks. Never dispose of the batteries by burning them! Before dismantling unplug from el. socket. More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service! Failure to comply with the instructions of the manufacturer will lead to the expiration of the right to guarantee repair!

TECHNICAL DATA

• Voltage (V) specified on the type label
• Input (W) specified on the type label
• Weight (kg) 0,32

EC declaration on conformity was issued for the product. Regarding EMC, the product conforms to Council Directive No. 2004/108/EC as amended and regarding electric safety, the product conforms to Council Directive No. 2006/95/EC as amended. The manufacturer reserves its right for unimportant deviations from the standard design without influencing of the product function.
Oil: Warning, Avoid contact with eyes, Do not drink, Keep away from children.

References

• ElektroEko – Odbiór odpadów elektro
• Úvod | ELEKTROWIN, a.s.
• Úvod - Envidom
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>