RADDY WF-55C Pro Weather Station User Guide

WF-55C Pro Weather Station
User Guide

WF-55C Pro Weather Station

WF-55C PRO

Features:

• Perpetual Calendar Up to Year 2099

• Day of week in 15 languages user selectable: English, German, French, Spanish, Italian, Dutch, Danish, Portuguese, Norwegian, Swedish, Polish, Finnish, Czech, Hungarian, and Russian

• Time in optional 12/24 hour format.

• Daily Alarm Function

• Automatic snooze function
  Temperature:
  Indoor temperature measurement ranges: -9.9°C (15″F) to 50C (122″F)
  Outdoor temperature measurement ranges: -40°C (-40F) to70C(158F)
  – Temperature alternatively in °C or °F.
  Humidity: Indoor & Outdoor measurable range: 20%RH ~ 95%RH

• Minimum/maximum display for air humidity and temperature

• Indoor and outdoor temperature and humidity upper and lower limit alert and frost warning

• Indoor and outdoor three-level display mold risk

• Wireless Outdoor Sensor:
  – Wall Mount or Table Stand
  – 433.92MHz RF transmitting frequency
  – 60 meters transmission range in an open area
  -Up to 3 wireless outdoor sensors can be connected.
  (One Wireless outdoor Sensor Included)

• The weather forecasting function

• Power Supply:
  Weather Station:
  Battery: 2 x LR03 AAA
  DC-POWER: DCSV {Input current is greater than 200mA , TYPE-C interface)
  Wireless Remote Sensor:
  Battery:2 x LR6 AA
  F.Y.I.:
  The wireless remote sensor can work at -30C to +70°C.
  Please choose the right battery according to the limit temperature of the wireless sensor:
  Alkaline zinc manganese battery can work at -20C to +60°C
  Polymer lithium ion rechargeable battery can work at -40C to + 70°C.

Weather Station Appearance

Part A-Positive LCD
Al. Outdoor remote wireless channel and receiving icon
A2: Outdoor Remote Temperature
A3· TIME
A4 Outdoor Remote Humidity
A5· Calendar
A6: Outdoor comfort diagram
A7 Indoor comfort diagram
A8: WEEK
A9: Indoor Humidity
A10: Atmospheric Pressure
A11: Indoor Temperature
A12: Weather Forecasting
Part B -Back button and power

B1:  touch field
B2: “ ” button
B3: “ “button
B4: button
BS: button
B6: button
B7: “ ” button
B8: Power supply socket —TYPE-C
B9: Hanging hole
B10: Support frame
B11: Battery compartment

Part C -Wireless Remote Sensor:
Cl: LCD display — Temperature
C2: LCD display- Humidity
C3: Transmit signal LED
C4: “CPF” button
CS: “TX” button
C6: “CHANNEL 1 or 2 or 3” switch
C7: Battery compartment

Initial operation:

• According to the appearance of the Weather Station, the power adapter is inserted from the B8 position, and the power supply of the power adapter is also noted.

• Open Weather Station battery compartment cover, open Weather Station battery compartment cover, insert 2 x AA batteries observing polarity [ “+” and”_” marks]

• After the weather station is connected to the power supply according to the above two steps, all the icons on the LCD display will light up for 3 seconds, you will hear the buzzer, and check the indoor temperature and humidity.

• The Weather Station will now start to make a connection to the outdoor remote sensor. This operation takes about 3 minutes and is displayed by a flashing reception RF antenna symbol in the “OUTDOOR” display area on the  receiver.

• This now, open Wireless Outdoor Sensor battery compartment cover, according to the channel to be set, the channel of the sensor is set through the shift switch of the C6 position of the sensor, and Insert 2 x AAA  batteries  observing polarity [“+” and”-” marks]

• When the wireless sensor is loaded into the battery, all the icon on the LCD display will briefly light up for 3 seconds, and detect the temperature and humidity of the sensor, At the same time, LED lights flicker once, the wireless sensors automatically transmit wireless signals.

• When the Wireless Sensor is launched, the Weather Station alarm automatically receives its signal, and the OUTDOOR” column displays the temperature and humidity values.
  FY.I.:

• The Weather Stations can receive up to 3 channels of wireless sensors.

• The conventional wireless sensor displayed by the  weather station is channel 1. If the wireless sensor is set to channel 2 or 3, you need to press button on the right side of the weather station to switch to channel 2 or 3, and then  check whether the temperature and humidity are correct to confirm whether the signal is successfully received.

Manual time setting:

• Press and hold down the button more than 2 seconds to enter the time and general settings, First set the unit of temperature “°C” or “°F” Now use the ” and “ ” button to set the temperature of the unit, the unit of temperature can be set to “°C” or “°F”.

• Press to confirm your setting, switch to pressure unit setting. Now use the ” ” and “ “button to set the pressure of the unit, the unit of t pressure can be set to “hPa” or “inHg”

• Press to confirm your setting, switch to the 12/24 hour mode display setting. Now use” ” and “ ” buttons to set the time displayed in 12-hour or 24-hour format

• Press to confirm your setting, switch to the hour setting. Now use ” ” and “ ” buttons to set the correct hour.

• Press to confirm your setting, switch to the Month and Date display setting. Now use ” ” and “ ” buttons to set the date display on Month/Date or Date/Month.

• Press to confirm your setting, switch to the year setting. Now use ” ” and “ ” buttons to set the correct year.

• Press to confirm your setting, switch to the month setting. Now use ” ” and “ ” buttons to set the correct month.

• Press to confirm your setting, switch to the date setting. Now use ” ” and “ ” buttons to set the correct date.

• Press to confirm your setting, switch to the language selection for the week and month displays setting. Now use ” ” and “ ” buttons to select a language.
  Note: There are 15 languages of Weekday: English, German, French, Italian, Spanish, Portuguese, Dutch, Danish, Norwegian, Swedish, Polish, Finnish, Czech, Hungarian, and Russian
  Week language displayLanguage| Sunday| Monday| Tuesday| Wednesday| Thursday| Friday| Saturday
  ---|---|---|---|---|---|---|---
  ENGLISH| MONDAY| TUESDAY| WEDNESDAY| THURSDAY| FRIDAY| SATURDAY| SUNDAY
  ENG| MON| TUE| WED| THU| FRI| SAT| SUN
  GERMAN| MONTAG| DI E NSTAG| MITTWOCH| DO N N E RSTAG| FREITAG| SAMSTAG| SO N NTAG
  GER| MON| DIE| MIT| DON| FRE| SAM| SON
  FRENCH| LUNDI| MARDI| MERCREDI| JEUDI| VENDREDI| SAME DI| DIMANCHE
  FRE| LUN| MAR| MER| 1 EU| VEN| SAM| DIM
  ITALIAN| LUNEDI| MARTED1| MERCOLED1| GIOVEDI| VENER Di| SABATO| DOME NICA
  ITA| LUN| MAR| MER| GIO| VEN| SAB| DOM
  SPANISH| LUNES| MARTES| MIERCOLES| JUEVES| VIERNES| SABADO| DOMINGO
  SPA| LUN| MAR| MIE| JUE| VIE| SAB| DOM
  PORTUGUESE| SEGUNDA-F E IRA| TERCA| QUARTA-F EIRA| QUI NTA- F El RA| SEXTA-FE IRA| SABADO| DOMINGO
  POR| SEG| TER| QUA| QUI| SEX| SAB| DOM
  DUTCH| MAANDAG| DINSDAG| WOENSDAG| DON DERDAG| VRIJDAG| ZATERDAG| ZON DAG
  DUT| MAA| DIN| WOE| DON| VRI| ZAT| ZON
  DANISH| MANDAG| TIRSDAG| ONSDAG| TORSDAG| FREDAG| LORDAG| SON DAG
  DAN| MAN| TIR| ONS| TOR| FRE| LOR| SON
  NORWEGIAN| MANDAG| TIRSDAG| ONSDAG| TORSDAG| FREDAG| LORDAG| SON DAG
  NOR| MAN| TIR| ONS| TOR| FRE| LOR| SON
  SWEDISH| MANDAG| TISDAG| ONSDAG| TORSDAG| FREDAG| LORDAG| SON DAG
  SWE| MAN| TIS| ONS| TOR| FRE| LOR| SON
  POLISH| PONIEDZIAtEK| WTOREK| SRODA| CZWARTEK| PIATEK| SOBOTA| NIEDZIELA
  POL| PON| WTO| SRO| CZW| PIA| SOB| NIE
  FINNISH| MAANANTAI| TIISTAI| KESKIVIIKKO| TORSTAI| PE RJANTAI| LAUANTAI| SU N N U NTA I
  FIN| MAN| TII| KIS| TOR| PER| LAU| SUN
  CZECH| PONDELI| ()TER’?| Staked| eTVRTEK| PATEK| SOBOTA| NEDELE
  CZE| PON| UTE| STR| CTV| PAT| SOB| NED
  HUNGARIAN| HETFO| KEDD| SZER DA| csOrtircro K| PENTEK| SZOMBAT| VASARNAP
  HUN| HET| KED| SZE| CSU| PEN| SZO| VAS
  RUSSIAN
  PERIOD| flOHEAEJIbH1,1K| BTOPHPIK| CPEAA| LIETBE Pr| WITHI/ILIA| CY660TA| BOCKPECEHbE
  RUS| nom| BTO| CPE| 4ET| WIT| CY6| BOC

• Press to confirm your setting, switch to barometric pressure calibration mode. Now use ” ” and “ ” buttons to set the atmospheric pressure value.

• Press to confirm your setting, switch to setting the initial weather. Now use ” ” and “ ” buttons to to select the current weather

• Press to confirm your setting and to end the setting procedures, enter the clock mode.

• During the setting process, press and hold the Button for more than 1 second to exit the setting mode immediately
  F.Y.I.

• After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal Time Mode

• In the set time, the number of minutes of the change, automatically from the zero second forward

• In the set time, you can press hold the ” ” and “ ”  button to quickly change the setting of the value

• The forecast of the weather station is based on the analysis of changes in air pressure. The atmospheric pressure is provided by the factory and has been adjusted to absolute pressure. Since air pressure usually decreases as altitude  increases, public meteorological agencies always publish so-called relative air pressure. In order to obtain a comparable value, the relative air pressure has been adjusted to the topography of the country. You can adjust the air  pressure of the weather station to the ratio of its location. For this, you must uniquely adjust the current air pressure of the weather station. Ask your local weather forecast service about the air pressure at sea level, or get the current value from the Internet. The above adjustment of the air pressure setting is based on this reason.
  When you use this weather station for the first time, the current local weather is not semi sunny, so you can adjust the initial weather of the weather station

Setting the daily alarms:

• Press and hold down button more than 2 seconds to enter the alarm setting mode, first enter the alarm 1 hour setting. Use the”A” and”y buttons to set the required hour.

• Press Button to confirm your setting, switch to the alarm 1 Minute setting. Use the ” ” and “ ” buttons to set the required minute.

• Press button to confirm your setting, switch to the alarm 1 repeat setting. Use the “” ” and “ ” buttons to set the alarm repeat in “M-F” or “S-S” or “M.F” and “SS

• Press button confirm your setting, switch to the alarm 1 snooze time setting. Use the ” ” and “ ” buttons to set the minute of snooze you need.

• Press button to confirm your setting, switch to the alarm 2 hour setting. Use the ” ” and “ ” buttons to set the required hour

• Press button to confirm your setting, switch to the alarm 2 minute setting. Use the” ” and “ ” buttons to set the required minute.

• Press button to confirm your setting, switch to the alarm 1 repeat setting. Use the ” ” and “ ” buttons to set the alarm repeat in “M.p” er “S.5” or  “MF” and “S-S

• Press Button to confirm your setting, switch to the alarm 1 snooze time setting. Use the ” ” and “ ” buttons to set the minute of snooze you need.

• Press button to confirm your setting and to end the setting procedure.

• During the setting process, press and hold the for more than 1 second to exit the setting mode immediately
  F.Y.I.:

• After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal clock mode.

• The alarm is repeatedly set to M-F, the alarm function will be activated from Monday to Friday, the Saturday and Sunday will be invalid. The alarm is repeatedly set to S-S, and the alarm function will be activated on Saturday and  Sunday, and will expire from Monday to Friday. When the alarm is repeatedly set to display both M-F and S-S, the alarm function will be activated throughout the week.

• the snooze time setting range: 5 60MIN, OFF, when set to OFF, means no snooze function. Snooze time unit is minutes.

The alarm for opening and closing

• page4uh Button can switch the display in sequence at ALARM1 time \ALARM2 time
• When switching display in ALARM1 time mode, press the “ ” button to turn the alarm1 on or off. The alarm 1turn on, displayed, the alarm 1 function is open, the repeat of alarm icon at the same time is also displayed.
• When switching display in ALARM2 time mode, press the “ ” button to turn the alarm2 on or off. The alarm 2turn on, is displayed, the alarm 2 function is open, the repeat of alarm icon at the same time is also displayed.
• me alarm 1 or alarm 2 turn on, or disappears, the alarm 1 or alarm 2 function is close.

Switching off the alarm signal

• Press any button except the Button to stop the alarm signal. It is not necessary to reactivate the alarm. It switches itself automatically to the alarm time which has already been set.
  F.Y.I.:

• The alarm will sound for 2 minutes if you do not deactivate it by pressing any button, In this case the alarm will be repeated automatically after 24 hours.

• Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard.

Snooze function:

• When the time is up to the alarm, press the , the alarm signal stops, and enter the SNOOZE mode. After the snooze time is counted, the alarm will ring again.
• In snooze mode, press any buttons except the Button or touch the position and hold for more than 2 seconds to exit the snooze mode.
  F.Y.I.:
  When the snooze function is set to OFF, when the time is up to the alarm, touch the position does not have this snooze function.

Temperature & Humidity detection:
Indoor temperature measuring range: -9,9C (+14F) +50C(+122F), LL.L C(“F) will displayed if value lower than -9.9C(+14F), HH.H C(“F) will displayed if value higher than +50C (+122F). Outdoor temperature measuring range: 40C (A40F) +70€(+158F), LL.L C(“F) will displayed if value lower than 4C (-40″F), HH.H C() will displayed if value higher than +70C (+158F).

• Indoor and outdoor humidity measuring range: 20%RH 95%RH, 19%RH will displayed if value lower than 20%RH, 96%RH will displayed if value higher than 95%RH.

Wireless sensor transmission:

• When the Weather Station successfully receives signals from the Wireless Sensor, the temperature and humidity of the outdoor are displayed on the “OUTDOOR” column of the weather station.

• The Weather station can connect up to 3 channel wireless sensor registration, the use of multiple wireless sensor, the wireless sensor channel cannot choose the same channel at the same time (a total of 1, 2, 3 channel can choose)

• Press the button can switch the display of different channels of outdoor temperature and humidity, when displaying the will display the channel every 5 seconds automatically switch a channel

• If the Weather Station failed to receive transmission from outdoor sensor (“–” display on the LCD), press and hold button for 3 seconds to receive transmission manually. the “OUTDOOR” will show an animation of the RF antenna symbol , the Weather Station will re receive the wireless signal of the outdoor sensor.
  F.Y.I.

• when the wireless sensor set up different channels, the weather station “OUTDOOR” also want to switch to the same channel. When there is no wireless sensor signal transmission on the channel, “–” will be displayed in the channel of the weather station

Displaying temperature/humidity and temperature/humidity trend

• The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend (indoors) are shown in the LCD display.
• After successfully connecting with the remote sensor, the weather station can display the remote temperature/humidity and the temperature/humidity trend (remote)
• You may see the following displays:
  :The temperature/humidity is rising.
  NO DISPLAY: The temperature/humidity is remaining constant.
  :The temperature/humidity is falling.

Maximum/Minimum Temperature/Relative Humidity

• To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the ” ” button: Once to show the maximum temperature and humidity values.
  Twice to sow the minimum temperature and humidity values
  Three times to return to the current temperature and humidity levels

• To reset the maximum and minimum temperature and humidity, press and hold down the” ” button about 2 seconds. This will reset all minimum and maximum data recorded to the current displayed values.
  F.Y.I.:

• If the temperature reading is below ranges, the Ll.L will be displayed. If the temperature reading is above ranges, the HH.H will be displayed.

• If the humidity reading is below ranges, the 19%RH will be displayed. If the humidity reading is above ranges, the 96%RH will be displayed.

Comfort and mildew risk instructions

• Comfort level is calculated according to the humidity, a total of 5 levels.
• The moldy risk display reads the indoor humidity to determine moldy risk level. The weather station will display one of 4 indicators: HI {high) ME (medium) LO (low) and no risk (no arrow displayed).

Comfort level| Humidity
range
---|---
| TOO DRY| <35%
| DRY| 35%44%
| COMFORT| 45%65%
| WET| 66% 80%
| TOO WET| >80%

Temperature and Humidity alerts setting
In the normal display, press the  Button to switch to the temperature and humidity alert item viewing mode, and then press the button to switch to view the next item, in order:

1. In temperature upper limit alarm
2. In temperature lower limit alarm,
3. In humidity upper limit alarm,
4. In humidity lower limit alarm,
5. Out temperature upper limit alarm
6. Out temperature lower limit alarm,
7. Out humidity upper limit alarm,
8. Out humidity lower limit alarm,

• In out alert item viewing mode, press the button to switch to a different channel, in the order of  items: CH1, CH2, CH3, and can switch cyclically

• In this alert item viewing mode, the alert function of each item can be turned on or off by pressing the -” button when the respective item is displayed, and the corresponding alarm symbol ·HI 6e ·L0 ” is displayed when it is turned on.

• Press and hold down the button for more than 2 seconds to enter the temperature and humidity alert setting, the first is the upper limit alert setting of the in temperature. Use the” ” and “ ” buttons to set the upper limit alert value

• Press the button to confirm and switch to the next item, set the lower limit of the in temperature alert, Use the ” ” and “ ” buttons to set the lower limit alert value

• Press the button to confirm and switch to the next item, set the upper limit of the in humidity alert, Use the” ” and “ ” buttons to set the upper limit alert value

• Press the button to confirm and switch to the next item, set the lower limit of the in humidity alert, Use the ” ” and “ ” buttons to set the lower limit alert value

• Press the button to confirm and switch to the next item, set the upper limit of the out temperature alert, Use the ” ” and “ ” buttons to set the upper limit alert value

• Press the button to confirm and switch to the next item, set the lower limit of the out temperature alert, Use the ” ” and “ ” buttons to set the lower limit alert value

• Press the button to confirm and switch to the next item, set the upper limit of the out humidity alert, Use the ” ” and “ ” buttons to set the upper limit alert value

• Press the button to confirm and switch to the next item, set the lower limit of the out humidity alert, Use the ” ” and “ ” buttons to set the lower limit alert value

• Press “ ” button to confirm your settings and end the setup process.

• When setting the upper and lower limit alerts for temperature and humidity, press the bottom to switch the alert settings for setting the upper and lower temperature and humidity limits of different channels

• During the setting process, press and hold the button for more than 1 second to exit the setting mode immediately
  FY.I.:

• After 20 seconds without pressing any button, the weather station switches automatically from Set Mode to Normal Time Mode.

Temperature and humidity upper and lower limit and frost warning

• When the upper limit or lower limit alarm of the corresponding channel is turned on, and the actual value of its temperature or humidity exceeds the set upper limit or lower limit limit, the corresponding upper limit symbol ·HI lower  limit symbol LO “ and the corresponding display data will flash. At the same time, the product emits an alarm sound.
• In this alert mode, press any button to stop the alarm sound, and the warning is still displayed.
• When the temperature of the corresponding remote wireless channel is within the range of- 1C (+30F) to +3€(+37F), a frost warning will be triggered, and the frost symbol will be displayed on the corresponding channel and flash

Low battery:

• If the “INDOOR” column is display the battery icon  you need to replace the weather station’s battery as soon as possible,
• If the “OUTDOOR” column is to display the battery icon , you need to replace the wireless sensor battery of your channel as soon as possible based on the channel display.

The weather forecast:

• The weather station calculates a weather forecast for about the next 12 hours based on the barometric pressure trend. Of course this forecast can’t compare to that of professional weather services supported by satellites and high  performance computers, It provides only an approximate indication of the current weather development in a small local area. Please take the weather forecast from your local weather forecasting service into account as well as the  forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
• The weather station displays the following weather icon:

sunny|
---|---
slightly cloudy|
cloudy|
rainy|
Heavy rainy|
Snowy|

F.Y.I.:

• The Snowy icon will only appear if the outdoor temperature is below -4C {+25T) and the forecast would be rainy or stormy, By default, according to the temperature of CH1, when there is no signal in CH1, it is calculated according to the temperature of CH2. When there is no signal in CH1 and CH2, it is calculated according to the temperature of CH3.
• After the weather station needs 7-10 days of air pressure calibration, the weather forecast will tend to be stable with an accuracy rate of 70%-75%.
• The forecast can be given for a radius of up to 12-20km.
• The weather station can display the barometric pressure trend

Background lighting

• Press the button to adjust the brightness of the backlight, you can adjust the S state: 4 different brightness backlight and close the backlight. When the backlight brightness is not at the highest brightness, Press button Backlight turns to  highest brightness of 15 seconds.
  Note: If only the battery is used for power supply, it is recommended that the backlight be turned off. If you need to watch the display, press the Button to light it up for 15 seconds. Otherwise, the battery will soon run out of power and the backlight will become darker and darker

• The weather station can also set the backlight to automatically dim at night. Press and hold the for more than 2 seconds to enter the  night mode setting. First, turn the night function on or off. Now use” ” and “ ” buttons set  the night function to activate (ON) or close (OFF)
  Note: If the night backlight function is set to OFF, pressing the button will automatically exit the setting mode, and there will be no switching to the next setting

• Press to button to confirm your setting, switch to the brightness setting of the backlight change after entering the night. Now use” ” and “ ” buttons set the brightness required for the backlight change after entering the night

• Press to button to confirm your setting, switch to the hour of enter night mode setting. Now use” ” and “ ” buttons set the required hour

• Press to button to confirm your setting, switch to the minute t of enter night mode setting. Now use ” ” and “ ” buttons set the required minute

• Press to button to confirm your setting, switch to the hour of exit night mode setting. Now use ” ” and “ ” buttons set the required hour

• Press to button to confirm your setting, switch to the minute of exit night mode setting. Now use ” ” and “ ” buttons set the required minute

• Press to button to confirm your setting and to end the setting procedure.

• During the setting process, press and hold the Button for more than 1 second to exit the setting mode immediately

• When the night mode is on, the will be displayed. When the time reaches the time to enter the night mode, the backlight will automatically switch to the set night mode brightness, and when the time reaches the time to exit the  night mode, the backlight will return to the original brightness

• In night mode, the backlight can be switched to the highest brightness for 15 seconds by Pressing the button.

• When the backlight is turned off, the night mode automatically fails

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>