AFINIA LABEL Motorized Core Holder Label Rewinder User Manual
- May 15, 2024
- AFINIA LABEL
Table of Contents
AFINIA LABEL Motorized Core Holder Label Rewinder User Manual
Please keep the original packaging in case you need to return the unit. If we receive the system in non-original packaging, the warranty may be void.
The Label Rewinder is used to rewind labels from a 3″ (76mm) core holder. The rewinder can handle labels up to 8.6″ (220mm) wide and rewind rolls with external diameter up to 10″ (250mm). A switching power supply, input of 1,8A 100-240Vac, 50-60Hz output of 24V 2.5A, allows an electronic circuit to adjust the speed of rotation through the tension arm. An 2A fuse is used as protection.
INSTALLATION
TENSION ARM SPEED CALIBRATION
⚠ WARNINGS
- The main plug of power supply cord set of AC/DC power supply is considered as disconnecting device of equipment.
- Do not operate the rewinder while wearing loose fitting clothing or neck ties. Serious injury may result. If clothing or fingers are caught in the rollers, immediately disconnect the D.C. connector.
- Keep your hands away from the unit at all times while the unit is running.
- To prevent fire or shock hazard, do not expose the unit to rain or moisture. Operate the unit with only proper electrical specifications as labeled on the unit and the AC adapter.
WARNING
HAZARDOUS MOVING PARTS KEEP FINGERS AND OTHER BODY PARTS AWAY
FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For Users in the United States: This product is intended to be supplied by
AC/DC Power Supply delivered with the machine as for the UL regulation tested
and certificated together. This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. In a domestic environment this product may cause radio Interference In
which case the user may be required to take adequate measures. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation, If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Re-orient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cables is required to comply with the Class A limits of Part 15 of the FCC Rules. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate and/or obtain warranty service for this equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>