Portfolio LD4C 4 Inch Round New Construction Downlight Instruction Manual

May 15, 2024
Portfolio

Portfolio LD4C 4 Inch Round New Construction Downlight

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-
PRODUCT

Product Information

  • Specifications
  • Product Name: Downlight Wall Wash
  • Catalog #: LD4C | EU4C | 4LB
  • Type: New Construction Downlight
  • Beam Options: Narrow, Medium, Wide, Wall Wash
  • Lighting Features: 98 CRI, Tunable White, Dim to Warm
  • Lumen Range: 250-6000 Lumens

Product Usage Instructions

  • Interactive Menu
    • The product features an interactive menu for easy customization and control.
  • Product Certification
    • This product is certified to comply with Title 24 Part 6 LED Enclosed Light Source Requirements (JA8).
  • Control Compatibility
    • Compatible with WaveLinx LITE and WaveLinx PRO for advanced control options.
  • Dimensional and Mounting Details
    • Downlight:
    • Inside Diameter: 4″ [130mm]
    • Flange Diameter: MAX HEIGHT (SEE TABLE)
    • Height: 10-3/16″ [259mm]
    • Wall Wash:
    • Inside Diameter: 4″ [130mm]
    • Flange Diameter: MAX HEIGHT (SEE TABLE)
    • Height: 9-13/16″ [250mm] Refer to the product manual for detailed mounting instructions.

FAQs

  • How to order separate fixture components?
    • To order separate components (housing, trim, module), click on the Multi-Line Ordering Information Option button.
  • What are the available colour control options?
    • The colour control options include Full Spectrum (98 CRI), Dim to Warm, and Tunable White with various colour temperature ranges.
  • What driver options are available?
    • The driver options include Low Voltage Dimming drivers, Remote Drivers at different lengths and Plug-in Drivers for specific lumen ranges.

Product Features

Product Certification

Control Compatibility

Top Product Features

  • 250-6000 lumens
  • Easy disconnect for LED engine replacement and installation
  • Optional snap-in driver for ease of replacement
  • Standard 0-10V driver dims to 1%
  • 98 CRI; 2700K, 3000K, 3500K, 4000K, 5000K; D2W™ option from 3000K to 1850K
  • W2N tunable white CCT range 2700K to 6500K or 2000K to 5000K
  • Options to meet Buy American and other domestic preference requirements

Dimensional and Mounting Details

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(4\)

Single Line Order Information

SAMPLE ORDER NUMBER: LD4C209830D010M1H

  • The invoice will indicate separate fixture components (housing, trim, module) which will ship complete from a single CLS facility in separate cartons.
  • To receive separate components (housing, trim, module) shipment, click on the “Multi-Line Ordering Information Option” button to the right.
Housing Lumen (1) Colour Control CCT (20)
LD4C =LED Downlight 4” Nominal Aperture 02 =250 lumens (27)
30 =3000 Lumens (10) 98 =Full spectrum (Thrive) used with 98 CRI
light engine 98 CRI __

27 =2700K

30 =3000K

35 =3500K

40 =4000K

50 =5000K

LD4CCP =LED Downlight 4” Nominal Aperture, Chicago Plenum| 05 =500 lumens (27)| 35 =3500 lumens (10)| D2W =Dim to warm for 800-2500, 3500-4500 lumens; 90CRI, 3000K
For BAA or TAA use Multi-line Ordering| 08 =800 lumens (27)

10 =1000 Lumens (28)

| 40 =4000 Lumens (10)

45 =4500 Lumens (10)

| W2N2765 =Tunable White for 1000-3500 lumens, 2700K-6500K (D5LT & DE010

drivers only), 90CRI

| 15 =1500 Lumens| 50 =5000 Lumens (10)| W2N2050 =Tunable White for 1000-3500 lumens, 2000K-5000K (D5LT & DE010
| 20 =2000 Lumens

25 =2500 lumens

| 60 =6000 Lumens (10)| drivers only), 90CRI
Driver ( Specify from Driver column.)| The information is below for reference only.
---|---
Remote driver & plug-in driver
D010 =0-10V Dimming, 1% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =250-4500 lumens (up to 2000 lumens for remote driver) 1D010 =0-10V Dimming, 1% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =5000, 6000 lumens (2500 to 4500 lumens for remote driver) 2D010 =0-10V Dimming, 1% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =5000, 6000 lumens (2500 to 4500 lumens for remote driver)
3D010 =0-10V Dimming, 1% to 100%, 347V dedicated drivers, D2W =800 to 2500 lumens, 3500 and above use step down transformer / 98 CRI =800-3000; 250, 500, 3500 and above use step down transformer (250 to 4500 lumens for remote driver)| __

Offered 800-2500 with D2W, 250-4500 with 98 CRI

D010TR =0-10V (120-277V) or Phase-Cut (120V) dimming, 5-100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =250-3000 lumens (up to 2000 lumens for remote driver)
1D010TR =0-10V or Phase-Cut Dimming, 5% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver)
2D010TR =0-10V Dimming, 5% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI 3500-6000 lumens (2500 to 3000 lumens for remote driver)
3D010TR =0-10V Dimming, 5% to 100% 347V step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =250-6000 lumens (250 to 3000 lumens for remote driver)| Offered 800-2500 with D2W, 250-3000 with 98 CRI
DE010 =0-10V Dimming, 0% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =500-4500 lumens (up to 2000 lumens for remote driver) / W2N =1000 lumens 1DE010 =0-10V Dimming, 0% to 100%, 120V, D2W =3500-4500 / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N =1500-3500 lumens 2DE010 =0-10V Dimming, 0% to 100%, 277V, D2W =3500-4500 / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N =1500-3500 lumens 3DE010 =0-10V Dimming, 0% to 100%, 347V step down transformer, D2W =800-2500 and 3500-4500 lumens / 98 CRI =500-6000 lumens (500 to 4500 lumens for remote driver) / W2N =1000-3500 lumens| Offered 800-2500 with D2W, 500-4500 with 98 CRI,

W2N limited to 1000 lumens with remote driver and 1000-3500 lumens with plug in drivers

D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =500-4500 lumens (up to 2000 lumens for remote driver) / W2N =1000 lumens 1D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N =1500-3500 lumens 2D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N ; 1500-3500 lumens
3D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 347V step- down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI ; 500-6000 lumens (500 to 4500 lumens for the remote driver) / W2N =1000-3500 lumens| Offered 800-2500 with D2W, 500-4500 with 98 CRI,

W2N limited to 1000 lumens with remote driver and 1000-3500 lumens with plug in drivers

DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =800-3000 lumens (up to 2000 lumens for remote driver) (14)  1DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (14)  2DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (14)
3DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 347V step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =800-6000 lumens (800 to 3000 lumens for remote driver) (14)| Offered 800-2500 with D2W, 800-3000 with 98 CRI
DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, RJ45 Connection, D2W =800-2500 lumens / 98 CRI =800-3000 lumens (up to 2000 lumens for remote driver) (14)  1DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, RJ45 Connection, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (14)  2DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%,, 277V, RJ45 Connection, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (14)
3DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, RJ45 Connection, 347V step-down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =800-6000 lumens (800 to 3000 lumens for the remote driver) (14)| __

__

Offered 800-2500 with D2W, 800-3000 with 98 CRI

DLE =Lutron Ecosystem dimming 1% to 100%, 120V-277V, 800-2500 lumens (up to 2000 lumens for the remote driver)
1DLE =Lutron Ecosystem dimming 1% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =3000-5000 lumens (2500 lumens for remote driver)
2DLE =Lutron Ecosystem dimming 1% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =3000-5000 lumens (2500 lumens for remote driver)
3DLE =Lutron Ecosystem dimming 1% to 100%, 347V with step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =800-5000 lumens (800 to 2500 lumens for remote driver)| Offered 800-2500 with D2W and 98 CRI
DLV =Low voltage dimming driver (1-100%) for use with DLVP system, D2W =800-2500 lumens / 98 CRI =800-2000 lumens (3)| Offered with remote driver only for 800-2500 with D2W and 800-2000 with 98 CRI
Driver Options| Bar Hanger
---|---
Blank =Integral driver| Blank = Without hanger bars
RC100 =Remote 100ft (3) (33)| B26 = C-channel Bar Hanger, 26” Long, Pair
RC75 =Remote 75ft (3) (33)|
RC50 =Remote 50ft (3) (33)|
RC25 =Remote 25ft (3)|
RC15 =Remote 15ft (3)|
RC5 =Remote 5ft (3)|
RC2 =Remote 2ft (3)|
PD =Plug in Driver (26)|
Trim Distribution (5)| Trim Flange| Trim Finish| Options (3) (16) (31)
---|---|---|---
N =Narrow, Spun Aluminum (26) (30)

M =50° Cutoff, Medium Beam Reflector, Spun Aluminum MD =45° Cutoff, Medium Beam Reflector, Spun Aluminum W =Wide, Spun Aluminum

S =Shallow, Spun Aluminum

PS =Non-Conductive Shallow (dead front), white (11) (12)

CS =Cast Shallow, Die Cast Aluminum

BA =Spun Aluminum Baffle (7)

Wall Wash

SWN =Single Wall Wash, Spun Aluminum DWN =Double Wall Wash, Spun Aluminum CW =Corner Wall Wash, Spun Aluminum LSWW =Lensed Single wall wash, Spun Aluminum LDWW =Lensed Double wall wash, Spun Aluminum

| 0 =White Polymer Trim Ring

1 =Self-flanged (13) 2 =White Painted Self- flanged

4 =Knife edge rimless use with die-cast only (8) (23)

| LI =Specular Clear (9)

H =Semi-Specular Clear (9)

WMH =Warm Haze (9)

WH =Wheat (9)

GPH =Graphite Haze (9)

B =Specular Black (9)

MW =Matte White (Antimicrobial)

MB =Matte Black (8)

MMS =Matte Metallic Silver (8)

| EMBOD =Bodine® Emergency Module with Remote Test Switch (25) EMBOD6ST =Bodine® 6W Self Test Emergency Module with Remote Test Switch EM7 =7W Emergency Module with Remote Test Switch

EM14 =14W Emergency Module with Remote Test Switch EMBOD7ST =Bodine® Self Test Emergency Module (25) IEMBOD =Bodine® Emergency Module with Integral Test Switch (6) (25)  IEM7 =7W Emergency Module with Integral Test Switch (6) IEM14 =14W Emergency Module with Integral Test Switch (6)

EMV7 =7W Low Voltage Emergency Module with Remote Test Switch (4) EMV14 =14W Low Voltage Emergency Module with Remote Test Switch (4) ETRD =Emergency transfer device (32)

WPST =Factory installed Wavelinx (includes control module, sensor, cable, tile mount and ceiling mount sensor) (15) (18)

WLST =Factory installed WaveLinx LITE Sensor Kit (15) (17)

WPN = WaveLinx PRO Wireless Node without sensor (21)

Accessories

Accessories (Sold separately) (22)

  • TRM4P =White metal trim ring (2)
  • LGSKT4IP66 =IP66 Gasket Kit
  • DT4RF =4 inch frosted acrylic ring (29)
  • PRR4 =Rimless Plaster Ring (2)
  • RKP4 =Knife Edge plaster Ring (24)
  • RPM4MW =Rimless Millwork Ring, Matte White (2)
  • RPM4MB =Rimless Millwork Ring, Matte Black (2)
  • RKM4MW =Knife Edge Millwork Ring, Matte White (24)
  • RKM4MB =Knife Edge Millwork Ring, Matte Black (24)
  • HSA4 =Slope Adapter for 4” Aperture Housings, Specify Slope (34)

Connected Lighting Systems (3) (15)

  • WPST =Field installed WaveLinx Sensor Kit (17)
  • WLST =Field installed WaveLinx LITE Sensor Kit (18)

Transformers

  • H347 =H347 for 98CRI 4000 lumens and below; D2W 4500 lumens and below; W2N 4000 lumens and below
  • H347200 =347 to 120V Step Down Transformer, 200VA

Bar Hangers

  • HB50 =C-channel Bar Hanger, 50” Long, Pair
  • RMB22 =Wood Joist Bar Hanger, 22” Long, Pair

Notes:

  1. Nominal Lumens will vary depending on the selected colour, CRI, driver and reflector finish.
  2. Order trim with polymer trim ring (Consult specification sheet for colour ordering information and options).
  3. Not available with Chicago Plenum.
  4. ULus listed only
  5. Beam angles are nominal with LI finish trims.
  6. Available with narrow (N), medium (M) and medium 45-degree (MD) Spun Aluminum trims. Required for use with all IEMBOD, IEM7, IEM14, IEMV7 and IEMV14 housings. Not offered with remote driver.
  7. Only available with Matte White and Matte Black Finishes.
  8. Available only on CS distributions.
  9. Not available on PS, CS or BA distributions.
  10. The product is marked spacing. Reference table on page 4.
  11. PS is available in a self-flanged MW finish only.
  12. Offered up to 2000 lumens
  13. The flange is the same finish as the reflector
  14. DMX fixtures default to full-on upon loss of DMX signal.
  15. Refer to system specifications for additional information, features, and benefits. Order either factory factory-installed option or an accessory. Use with 0-10V driver.
  16. Non-IC
  17. WLST=WaveLinx LITE tile mount sensor kit for daylight dimming, PIR motion sensing, use with D010 only (Refer to WaveLinx LITE system specifications)
  18. WPST=WaveLinx wireless sensor kit for daylight dimming, PIR motion sensing, and optional RLTS – Real Time Location Services, use with 0-10V only.
  19. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to the DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analysed under domestic preference requirements. Offered with spun aluminium narrow (N), medium (M), and wide (W) trims.
  20. Not required for W2N and D2W.
  21. WPN = WaveLinx PRO wireless node provides luminaire-level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with 0-10V driver only.
  22. Accessories sold separately will be separately analyzed under domestic preference requirements. Consult the factory for further information.
  23. Accessory (Requires knife edge accessory ring)
  24. Order die-cast trim with flange type 4
  25. Not available for W2N
  26. Offered up to 2500 lumens with D2W and 3500 with W2N
    • D010, D5LT, DE010 up to 4500 lumens with 98 CRI
    • D010TR, DMX up to 3000 lumens with 98 CRI
    • DLE, DL2 up to 2500 lumens with 98 CRI
  27. IC rated
  28. Tunable white IC rated with 1000 lumens
  29. Order with self-flanged trim.
  30. Offered with DLVP up to 2000 lumens with 98 CRI.
  31. 120V-277V
  32. Used to bypass local control during outage. Must be used in conjunction with UL 1008 device (provided by others)
  33. Not available with Lutron drivers
  34. Not recommended for use with Wall Wash

Product Specifications

Lower Shielding Reflector

  • Painted die-cast aluminium or spun aluminium lower reflector with lensed upper optical chamber provides superior lumen output with minimal source brightness
  • Spun reflectors are available in all Portfolio anodized finishes
  • Available with non-conductive polymer reflectors up to 2000 lumens
  • Plaster lathing ring, knife edge and millwork ring accessory for flush reflector transition
  • The decorative frosted acrylic ring provides a light glow to the ceiling

Wall Wash Reflector

  • Open Wall Wash – wall wash reflector with gradient kicker offered in single, double and corner wall wash provides even vertical illumination with minimal source brightness.
  • Rotatable Lensed Wall Wash – Rotatable Lensed wall wash reflector offered in single and double wall wash provides even vertical illumination with minimal source brightness.

Trim Retention

  • Two torsion springs hold the reflector flange tightly to the finished ceiling surface Plaster Frame/Collar
  • Die-cast aluminium 1 ½” deep collar
  • Accommodates up to 2” ceiling thickness

Universal Mounting Bracket

  • Accepts 1/2” Electric Metallic Tube (EMT), C-channel and bar hangers
  • Adjusts 5” vertically from above and below the ceiling

Junction box

  • Four 1/2” and two 3/4” trade size pry outs positioned to allow straight conduit runs
  • Lever connectors for simple push-in wiring
  • Listed for eight #12 AWG (four in, four out) 90°C conductors and feed thru branch wiring

Thermal

  • Aluminium heat sink conducts heat away from the LED module for improved performance and longer life

LED System

  • Contains a plurality of high-brightness white LEDs combined with a high reflectance upper reflector and convex transitional lens producing even distribution without pixelation
  • Auto resetting, thermally protected, LEDs are turned off when safe operating temperatures are exceeded
  • Quick disconnect allows for tool-less replacement of LED engine from below the ceiling
  • 98 CRI and W2N: L70 55,000 hours
  • Colour variation within 2-step MacAdam ellipses
  • Available in 2400K, 2700K, 3000K, 3500K, 4000K and 5000K correlated color temperature (CCT)
  • D2W™ – dim-to-warm shifts CCT from 3000K to 1850K as fixture dims mimicking halogen sources.
  • W2N – Tunable white CCT range 2700K to 6500K or 2000K to 5000K, 90 CRI. Standard
  • 98 CRI With a full-spectrum approach using broad blue chip technology and special phosphor blends, Thrive can closely match the spectrum of the sun across all colour temperatures. Benefits of the natural spectrum of the sun using Thrive include superior accurate colour rendering, reduced eye strain, and a higher sense of emotional well-being.

Driver

  • Standard 120-277V 0-10V dimming driver provides flicker-free dimming from 100% to 1%
  • Optional 120V leading edge/0-10V, <1% 0-10V, Fifth Light, DMX or Lutron® Ecosystem
  • The driver can be serviced from above or through the aperture
  • Distributed low-voltage power system combines power, lighting, and controls with ease of installation.
  • Optional Magnetically guided snap-in driver for ease of maintenance.

Emergency Option

  • Provides 90 minutes of standby lighting, meeting most life safety codes for egress lighting
  • Available with integral or remote charge indicator and test switch
  • Available Self-Test with remote charge indicator and test switch
  • An emergency transfer device (ETRD) senses the loss of power regardless of local control settings allowing emergency power to the fixture.
  • UL 924 listed

Connected Lighting System

Two WaveLinx-connected solutions to choose from. Refer to WaveLinx system specifications and application guides for details.

  • WaveLinx PRO Tilemount Sensor Kit
    • WaveLinx WPST tilemount sensor kit offers daylight dimming, PIR motion sensing, scene and zone configuration, automatic commissioning; and optional RLTS – Real Time Location Services available.
  • WaveLinx PRO Wireless Node
    • WaveLinx PRO wireless node provides luminaire level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with 0-10V driver only.
  • WaveLinx LITE Tilemount Sensor Kit
    • WaveLinx LITE WLST tile mount sensor kit offers daylight dimming and PIR motion sensing, scene and grouping configuration.
  • WaveLinx Tilemount Kits Application
    • The WPST and WLST tile mount kits include a control module mounted on the luminaire junction box via 1/2” knock-out and a tile mount sensor on a 54-inch whip; for ceiling installation by direct-mount spring clips or via mounting bracket in octagon ceiling boxes.
    • The WPST and WLST tile mount kits may be ordered as factory-installed on the luminaire or ordered separately as a field-installed accessory kit.

Code Compliance

  • Thermally protected
  • cULus Certified to UL 1598 / C22.2 No. 250.0 suitable for wet locations with downlight; damp locations with wall wash and hyperbolic with covered ceiling
  • IP66 rated when used with IP66 gasket kit accessory
  • Use an IP66 gasket with a non-conductive reflector for sauna or steam room applications up to 2000 lumens and 40°C.
  • Optional City of Chicago environmental air (CCEA) marking for plenum applications
  • FCC CFR Title 47 Part 15 Class B at 120VAC and Class A at 277VAC
  • Insulated ceiling (IC) rated up to 800 lumens (98 CRI & D2W); 1000 lumens (W2N). All others are non-IC rated (insulation must be kept 3” from the top and sides of the housing).
  • Can be used for State of California Title 24 high efficacy LED compliance under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2016 JA8 High Efficacy Lighting
  • RoHS compliant
  • Photometric testing completed per IES LM-79
  • LED life testing was completed by IES LM-80-08 and TM-21-11 standards
  • See table on page 3 for marked spacing requirements

Warranty

Marked Spacing

4-inch Marked spacing for 98 CRI

3000-6000| 36| 36| 8
4-inch Marked spacing for D2W

3000-4500| 36| 36| 8
4-inch Marked spacing for W2N

3000| 36| 36| 0.5
3500| 36| 36| 8

Dimension

Dimensional and Mounting Details

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(5\)

CATALOG #| Flange DIAMETER or WIDTH [IN]| INSIDE DIAMETER or WIDTH [IN]| MAX HEIGHT
---|---|---|---
250-2000 LUMENS (90/97CRI) 250-800 LUMENS (98CRI)| 2500-4000 LUMENS (90/97CRI) 1000-2500 LUMENS (98CRI) 800-2500 LUMENS (D2W) 1000-3000 LUMENS (W2N)| 4500-6000 LUMENS (90/97CRI) 3000-4500 LUMENS (98CRI)| 1000-1500IC LUMENS (90/97CRI) 6500-7000 LUMENS (90/97CRI) 3500 LUMENS (W2N)| 2 LEDs 4500-7500 LUMENS (90/97CRI) 5000-6000 LUMENS (98CRI) 3500-4500 LUMENS (D2W)
4LBN| 5.67| 4.24| 5.6| 5.6| 5.6| 6.1| 8.1
4LBM| 5.67| 4.26| 5.6| 5.6| 5.6| 6.1| 8.1
4LBW| 5.67| 4.27| 5.6| 5.6| 5.6| 5.7| 7.7
4LBBA| 5.67| 4.28| 5.6| 5.6| 5.6| 6.1| 8.1
4LBMD| 5.67| 4.26| 5.8| 5.9| 6.4| 6.9| 8.9
4LBHY| 5.67| 4.34| 5.6| 5.6| 5.6| 6.1| 8.1
4LBS| 5.67| 4.23| 5.6| 5.6| 5.6| 5.6| 6.4
4LBPS| 5.67| 4.23| 5.6| 5.6| 5.6| 5.6| 6.5
4LBCS| 5.67| 4.23| 5.6| 5.6| 5.6| 5.6| 6.5

Energy and Performance Data

D010 DRIVER ENERGY DATA

Series| 250 lumen| 500 lumen| 800 lumen| 1000 lumen| 1500 lumen| 2000 lumen
---|---|---|---|---|---|---
Input Voltage 120-277VAC| 120V| 277V| 120V| 277V| 120V| 277V| 120V| 277V| 120V| 277V| 120V| 277V
Input Current (A)| 0.029| 0.017| 0.061| 0.032| 0.085| 0.041| 0.084| 0.042| 0.135| 0.063| 0.189| 0.084
Input Power (W)| 3.45| 3.87| 7.33| 7.78| 10.15| 10.52| 10.04| 10.43| 16.17| 16.56| 22.58| 22.63
In-rush (A)| 2.1| 8.5| 3.7| 8.5| 3.6| 8.3| 3.6| 8.4| 2.3| 9.5| 2.1| 9.7
Inrush duration (µs)| 250| 131| 190| 136| 220| 135| 226| 136| 230| 125| 243| 132
THDi (%)| 7.21| 16.92| 7.82| 10.78| 5.57| 9.63| 7.78| 9.24| 4.75| 9.93| 8.03| 7.44
PF| ≥ 0.98| ≥ 0.9| ≥ 0.99| ≥ 0.93| ≥ 0.99| ≥ 0.95| ≥ 0.99| ≥ 0.95| ≥ 0.99| ≥ 0.94| ≥ 0.99| ≥ 0.96
Series| 2500 lumen| 3000 lumen| 3500 lumen| 4000 lumen| 4500 lumen| 5000 lumen
---|---|---|---|---|---|---
Input Voltage 120-277VAC| 120V| 277V| 120V| 277V| 120V| 277V| 120V| 277V| 120V| 277V| 120V| 277V
Input Current (A)| 0.276| 0.121| 0.276| 0.121| 0.333| 0.152| 0.404| 0.181| 0.421| 0.192| 0.491| 0.216
Input Power (W)| 32.98| 32.57| 32| 32.57| 39.83| 39.84| 48.38| 47.94| 50.22| 50.17| 58.69| 58.01
In-rush (A)| 2.5| 11.8| 3.6| 11.8| 3.1| 14.3| 3.1| 14.5| 5.6| 22.6| 5.6| 22.6
Inrush duration (µs)| 215| 111| 220| 111| 200| 94| 197| 95| 215| 120| 213| 135
THDi (%)| 9.86| 6.57| 5.57| 6.57| 4.25| 10.05| 5.02| 7.97| 6.12| 8.35| 8.51| 7.92
PF| ≥ 0.99| ≥ 0.97| ≥ 0.99| ≥ 0.99| ≥ 0.99| ≥ 0.94| ≥ 0.99| ≥ 0.95| ≥ 0.99| ≥ 0.95| ≥ 0.99| ≥ 0.96
Series| 5500 lumen| 6000 lumen
---|---|---
Input Voltage 120-277VAC| 120V| 277V| 120V| 277V
Input Current (A)| 0.526| 0.231| 0.542| 0.256
Input Power (W)| 62.97| 61.97| 64.88| 65.7
In-rush (A)| 5.1| 23.1| 6.2| 27.5
Inrush duration (µs)| 217| 138| 188| 101
THDi (%)| 9.42| 7.16| 4.33| 11.86
PF| ≥ 0.99| ≥ 0.96| ≥ 0.99| ≥ 0.93
Minimum starting temperature -30°C (-22°F)* (Nominal input 120-277VAC & 100% of rated output power)

Sound Rating: Class A standards

Notes: Emergency Battery packs are rated for a minimum starting temperature of 0°C.

COLOR METRICS – TM-30-15 & CRI/CIE

98 CRI Color Metric Summary- 3500K*

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(6\)

TM-30-15 Rf = 97

Rg = 100
CRI/CIE| Ra = 92.2
R9 = 51.4

Colour values are based on haze reflector, other finishes and field results may vary.

Beam Angle & Output

Trim| Beam Angle| LD4C30 Lumens, 35K| LD4C15 Lumens, 35K| Description
---|---|---|---|---
4LBWLI| 80°| 2631| 1383| Wide beam with LI finish
4LBW
H| 78°| 2220| 1167| Wide beam with H finish
4LBSLI| 66°| 2722| 1430| Shallow reflector with LI finish
4LBS
H| 86°| 2609| 1372| Shallow reflector with H finish
4LBNLI| 30°| 1956| 1028| Narrow beam ith LI finish
4LBN
H| 55°| 1660| 873| Narrow beam with H finish
4LBMLI| 29°| 2492| 1310| Medium beam with LI finish 50° cutoff
4LBM
H| 79°| 1998| 1050| Medium beam with H finish 50° cutoff
4LBMDLI| 52°| 2196| 1154| Medium beam with LI finish 45° cutoff
4LBMD
H| 55°| 1889| 992| Medium beam with H finish 45° cutoff

Connected Solutions

WaveLinx LITE – WLST Tilemount Sensor

  • Intuitive Android™ or Apple® iOS® app for basic system code compliant set-up and configuration via Bluetooth
  • Up to 28 unique areas per project site (WaveLinx LITE Bluetooth network)
  • Up to 50 devices for an area, any one of 16 control zones, up to 6 occupancy sets, and custom lighting scenes
  • Automatic occupancy or vacancy, sensor sensitivity, daylight dimming, etc. configurable through the app
  • Refer to the WaveLinx system specifications for details.Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1 \(9\)

WaveLinx LITE WLST Tilemount Wiring Diagram

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(10\)

WaveLinx LITE Bluetooth Enabled System

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(11\)

WaveLinx PRO Wireless – WPST Tilemount Sensor

  • WaveLinx PRO Wireless functionality configures zones and customizes settings from one secure mobile app
  • Automatic code commissioning that meets the strictest codes
  • Fixtures and sensors integrate with Wireless Area Controllers, Wall Stations, and Control Devices
  • Stand-alone offices or Entire Building Network Installations

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(13\)

WaveLinx mobile app settings

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(14\)

WaveLinx PRO WPST Tilemount Wiring Diagram

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(15\)

WaveLinx CORE Building Management Integration

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(16\)

WaveLinx PRO Wireless Node – WPN

  • WaveLinx Wireless functionality configures zones and customizes settings from one secure mobile app
  • Automatic code commissioning that meets the strictest codes
  • Fixtures and sensors integrate with WaveLinx Area Controller, Wall Stations, and Control Devices
  • Stand-alone offices or Entire Building Network InstallationsPortfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1 \(17\)

WaveLinx mobile app settings

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(18\)

WaveLinx PRO Wireless Node (WPN) Wiring Diagram

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(19\)

WaveLinx CORE Building Management Integration

Portfolio-LD4C-4-Inch-Round-New-Construction-Downlight-FIG-1
\(20\)

Multi-line Order Information

SAMPLE ORDER NUMBER: LD4C10D010TRIEM14
The invoice will indicate separate fixture components (housing, trim, module) and may ship from multiple CLS facilities in separate cartons.

Domestic Preferences (1)| Housing| Lumens (2)| Color Control
---|---|---|---
[Blank] =Standard BAA =Buy American Act TAA =Trade Agreements Act| LD4C =LED Downlight 4-inch Nominal Aperture LD4CCP =LED Downlight 4-inch Nominal Aperture, Chicago Plenum| 02 =250 lumens 15 =1500 lumens          30 =3000 lumens (3)  45 =4500 lumens (3)

05 =500 lumens            20 =2000 lumens          35 =3500 lumens (3)  50 =5000 lumens (3)

08 =800 lumens            25 =2500 lumens          40 =4000 lumens (3)  60 =6000 lumens (3)

10 =1000 lumens

| Blank =W2N D2W =Dim to warm

FS =Full spectrum (Thrive) used with 98 CRI light engine

Driver ( Specify from Driver column.)| Information below for
reference only.
---|---
Remote driver & plug in driver
D010 =0-10V Dimming, 1% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =250-4500 lumens (up to 2000 lumens for remote driver) 1D010 =0-10V Dimming, 1% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) 2D010 =0-10V Dimming, 1% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver)

3D010 =0-10V Dimming, 1% to 100%, 347V dedicated drivers, D2W =800 to 2500 lumens, 3500 and above use step down transformer and dedicated driver / 98 CRI =800-3000 lumens & 250, 500, 3500 and above use step down transformer (250 to 4500 lumens for the remote driver)

1 driver: D2W=800-2500 lumens / 98 CRI=250-4500 lumens; 2 drivers: D2W=3500-4500 lumens / 98 CRI=5000-6000 lumens

| __

__

800-2500 with D2W,

250-4500

with 98 CRI

D010TR =0-10V (120-277V) or Phase-Cut (120V) dimming, 5-100%, D2W =800-2500 lumens / 98 CRI =250-3000 lumens (up to 2000 lumens for remote driver) 1D010TR =0-10V or Phase-Cut Dimming, 5% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) 2D010TR =0-10V Dimming, 5% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver)

3D010TR =0-10V Dimming, 5% to 100% 347V step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =250-6000 lumens (250 to 3000 lumens for remote driver)

1 driver: D2W=800-2500 lumens / 98 CRI=250-3000 lumens; 2 drivers: D2W=3500-4500 lumens / 98 CRI=3500-6000 lumens

| __

800-2500 with D2W,

250-3000

with 98 CRI

__

DE010 =0-10V Dimming, 0% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =500-4500 lumens (up to 2000 lumens for remote driver) / W2N =1000 lumens 1DE010 =0-10V Dimming, 0% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N =1500-3500 lumens 2DE010 =0-10V Dimming, 0% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N =1500-3500 lumens

3DE010 =0-10V Dimming, 0% to 100%, 347V step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =500-6000 lumens (500 to 4500 lumens for remote driver) / W2N =1000-3500 lumens

1 driver: D2W=800-2500 lumens / 98 CRI 500-4500 lumens; 2 drivers: D2W=3500-4500 lumens / 98 CRI=5000-6000 lumens

| __

__

800-2500 with D2W,

500-4500

with 98 CRI

D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =500-4500 lumens (up to 2000 lumens for remote driver) / W2N =1000 lumens 1D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N =1500-3500 lumens 2D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =5000-6000 lumens (2500 to 4500 lumens for remote driver) / W2N ; 1500-3500 lumens

3D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 347V step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =500-6000 lumens (500 to 4500 lumens for remote driver) /

W2N =1000-3500 lumens

1 driver: D2W=800-2500 lumens / 98 CRI=500-4500 lumens; 2 drivers: D2W=3500-4500 lumens / 98 CRI=5000-6000 lumens

| __

__

800-2500 with D2W,

500-4500

with 98 CRI

DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =800-3000 lumens (up to 2000 lumens for remote driver) (5)  1DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (5)  2DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (5)

3DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 347V step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =800-6000 lumens (800 to 3000 lumens for remote driver) (5)

1 driver: D2W=800-2500 lumens / 98 CRI=800-3000 lumens; 2 drivers: D2W=3500-4500 lumens / 98 CRI=3500-6000 lumens

| __

800-2500 with D2W,

800-3000

with 98 CRI

DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, RJ45 Connection, D2W =800-2500 lumens / 98 CRI =800-3000 lumens (up to 2000 lumens for remote driver) (5)  1DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, RJ45 Connection, D2W =3500-4500 & 7000 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (5)  2DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, RJ45 Connection, D2W =3500-4500 & 7000 lumens / 98 CRI =3500-6000 lumens (2500 to 3000 lumens for remote driver) (5)

3DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, 347V step down transformer, RJ45 Connection, D2W =800-2500 & 3500-4500 lumens / 98 CRI =800-6000 lumens (800 to 3000 lumens for remote driver) (5)

1 driver: D2W=800-2500 lumens / 98 CRI=800-3000 lumens; 2 drivers: D2W=3500-4500 lumens / 98 CRI=3500-6000 lumens

| __

__

800-2500 with D2W,

800-3000

with 98 CRI

DLE =Lutron Ecosystem dimming 1% to 100%, 120V-277V, D2W =800-2500 lumens / 98 CRI =800-2500 lumens (up to 2000 lumens for remote driver) 1DLE =Lutron Ecosystem dimming 1% to 100%, 120V, D2W =3500-4500 lumens / 98 CRI =3000-5000 lumens (2500 lumens for remote driver) 2DLE =Lutron Ecosystem dimming 1% to 100%, 277V, D2W =3500-4500 lumens / 98 CRI =3000-5000 lumens (2500 lumens for remote driver)

3DLE =Lutron Ecosystem dimming 1% to 100%, 347V with step down transformer, D2W =800-2500 & 3500-4500 lumens / 98 CRI =800-5000 lumens (800 to 2500 lumens for remote driver)

1 driver: D2W=800-2500 lumens / 98 CRI=800-2500 lumens; 2 drivers: D2W=3500-4500 lumens / 98 CRI=3000-5000 lumens

| __

__

800-2500 with D2W and 98 CRI

DLV =Low voltage dimming driver (1-100%) for use with DLVP system, D2W =800-2500 lumens / 98 CRI =800-2000 lumens (6)| 800-2500 with D2W and 800-2000 with 98 CRI (Not offered with plug-in driver)
DE010W2N2765 =Tunable white 2700-6500K, 0-10V Dimming, 0% to 100%, 120-277V, 1000 lumens 1DE0102765 =Tunable white 2700-6500K, 120V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens 2DE0102765 =Tunable white 2700-6500K, 120V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens

3DE0102765 =Tunable white 2700-6500K, 347V with step down transformer, 0-10V Dimming, 0% to 100%, 1000-3500 lumens

1 driver: 1000-3500 lumens

| __

__

Remote driver limited to 1000 lumens, Plug-in the driver 1000-3500 lumens

DE010W2N2050 =Tunable white 2000-5000K, 0-10V Dimming, 0% to 100%, 120-277V, 1000 lumens 1DE0102050 =Tunable white 2000-5000K, 120V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens 2DE0102050 =Tunable white 2000-5000K, 277V, 0-10V Dimming, 0% to 100%, 1500-3500 lumens

3DE0102050 =Tunable white 2000-5000K, 347V with step down transformer, 0-10V Dimming, 0% to 100%, 1000-3500 lumens

1 driver: 1000-3500 lumens

| __

__

Remote driver limited to 1000 lumens, Plug-in driver 1000-3500 lumens

D5LTW2N2765 =Tunable white 2700-6500K, 120V-277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 120-277V, 1000 lumens 1D5LTW2N2765 =Tunable white 2700-6500K, 120V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens 2D5LTW2N2765 =Tunable white 2700-6500K, 277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens 3D5LTW2N2765 =Tunable white 2700-6500K, 347V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-3500 lumens

1 driver: 1000-3500 lumens

| __

__

Remote driver limited to 1000 lumens, Plug-in driver 1000-3500 lumens

D5LTW2N2050 =Tunable white 2000-5000K, 120V-277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 120-277V, 1000 lumens 1D5LTW2N2050 =Tunable white 2000-5000K, 120V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens 2D5LTW2N2050 =Tunable white 2000-5000K, 277V Fifth Light® (DALI T6) Dimming, 0% to 100%, 1500-3500 lumens

3D5LTW2N2050 =Tunable white 2000-5000K, 347V with step down transformer Fifth Light® (DALI T6) Dimming, 0% to 100%, 1000-3500 lumens

1 driver: 1000-3500 lumens

| __

__

Remote driver limited to 1000 lumens, Plug-in driver 1000-3500 lumens


Driver Options

| ****

Options (6) (29) (30)

---|---
Blank =Integral driver| EMBOD =Bodine® Emergency Module with Remote Test Switch (10)| EMV7 =7W Low Voltage Emergency Module with Remote Test Switch (7)
R =Remote driver (order remote driver separately) (6)| EMBOD6ST =Bodine® 6W Self-Test Emergency Module with Remote Test Switch| EMV14 =14W Low Voltage Emergency Module with Remote Test Switch (7)
PD =Plug in Driver (8)| EM7 =7W Emergency Module with Remote Test Switch| ETRD =Emergency transfer device (31)
| EM14 =14W Emergency Module with Remote Test Switch| WPST =Factory installed Wavelinx (includes control module, sensor, cable, tile mount
| EMBOD7ST =Bodine® Self Test Emergency Module (10)| and ceiling mount sensor) (11) (13)
| IEMBOD =Bodine® Emergency Module with Integral Test Switch (10) (22)| WLST =Factory installed WaveLinx LITE Sensor Kit (11) (12)
| IEM7 =7W Emergency Module with Integral Test Switch (22)| WPN = WaveLinx PRO Wireless Node without sensor (15)
| IEM14 =14W Emergency Module with Integral Test Switch (22)|

SAMPLE ORDER NUMBER: EU4C10209035

Domestic Preferences (1)| Power Module| Lumen Levels (2)| CRI (2)| Color
---|---|---|---|---
[Blank] =Standard BAA =Buy American Act TAA =Trade Agreements Act| EU4C =4-inch Universal LED Module| One 98 CRI THRIVE LED for use with one drive r

0208IC =250, 500 and 800 lumens 98 CRI, IC rated (For use with all drivers, min 500 lumens with DE010 and D5LT, min 800 lumens with DLVP, Lutron and DMX)

1025 =1000, 1500, 2000 and 2500 lumens, 98 CRI (For use with D010, D010TR, DE010, DMX and Lutron 1000-2500

lumens. DLVP 1000-2000 lumens)

| 98 =98CRI Minimum| 98 CR I

27 =2700K

30 =3000K

35 =3500K

40 =4000K

50 =5000K

| | 3045 =3000, 3500, 4000 and 4500 lumens, 98 CRI (For use with D010, D5LT and DE010 3000-4500 lumens, D010TR| |
| | and DMX 3000 lumens) (3)| |
| | Two 98 CRI THRIVE LED for use with two drivers| |
| | 30452 =3000, 3500, 4000 and 4500 lumens, 98 CRI (For use with Lutron 3000-4500 lumens, D010TR and DMX| |
| | 3500-4500 lumens) (3)| |
| | 5060 =5000, 6000 lumens, 98 CRI (For use with D010, DE010 and D5LT 5000-6000 lumens, D010TR and DMX| |
| | 5000-6000 lumens, Lutron 5000 lumens) (3)| |
| | Dim 2 Warm
| | 08259030D2W =800-2500 lumen, 90 CRI, Dim 2 Warm (1 driver and 1 LED) (32)
| | 35459030D2W =3500-4500 lumen, 90 CRI, Dim 2 Warm (2 drivers and LEDs)
| | Tunable white
| | 1030W2N902765 =1000, 1500, 2000, 2500, 3000 lumens, 90 CRI, tunable white 2700K-6500K (33)
| | 1030W2N902050 =1000, 1500, 2000, 2500, 3000 lumens, 90 CRI, tunable white 2000K-5000K (33)
| | 35W2N902765 =3500 lumens, 90 CRI, tunable white 2700K-6500K (3)
| | 35W2N902050 =3500 lumens, 90 CRI, tunable white 2000K-5000K (3)

SAMPLE ORDER NUMBER: 4LBM2H

Domestic Preferences (1)| ****

Trim

| ****

Reflector

| ****

Flange

| ****

Finish

| ****

Options

---|---|---|---|---|---
[Blank] =Standard

BAA =Buy

American Act

| 4LB =4” LED| N =Narrow, Spun Aluminum (8) (23)

M =50° Cutoff, Medium Beam Reflector, Spun Aluminum

| Wall Wash

SWN =Single wall wash, spun aluminium

DWN =Double wall wash spun aluminum

| 0 =White polymer trim ring

1 =Self flanged (18)

2 =White painted self

| LI =Specular Clear (20)

H =Semi-Specular Clear (20)

WMH =Warm Haze (20)

| E =Integral Emergency Test Switch Hole (22)
| | MD =45° Cutoff, Medium Beam Reflector,| CW =Corner wall wash spun aluminium| flanged| WH =Wheat (20)|
| | Spun Aluminum| LSWW =Lensed single wall wash spun aluminium| 4 =Knife edge rimless use| GPH =Graphite Haze (20)|
| | W =Wide, Spun Aluminum| LDWW =Lensed double wall wash spun aluminium| with die-cast only (19)| B =Specular Black (20)|
| | S =Shallow, Spun Aluminum| | MW =Matte White|
| | PS =Non-Conductive Shallow (dead front), white (16) (17)| | MB =Matte Black (21)

MMS =Matte Metallic Silver (21)

|
| | CS =Cast Shallow, Die Cast Aluminum| | |
| | BA =Spun Aluminum Baffle (24)| | |

REQUIRED if Remote Driver (R) is specified SAMPLE ORDER NUMBER: RC10010D010TREM7

Domestic Preferences (1)| Remote Drivers (6)| Lumens (2) (14)| Color Control
---|---|---|---
[Blank] =Standard BAA =Buy American Act TAA =Trade Agreements Act| RC100 =Remote 100ft RC75 =Remote 75ft RC50 =Remote 50ft RC25 =Remote 25ft RC15 =Remote 15ft RC5 =Remote 5ft RC2 =Remote 2ft| 02 =250 lumens                     20 =2000 lumens

05 =500 lumens                     25 =2500 lumens

08 =800 lumens                     30 =3000 lumens

10 =1000 lumens                   35 =3500 lumens

15 =1500 lumens                   40 =4000 lumens

45 =4500 lumens

| [Blank] =W2N D2W =Dim to warm

FS =Full spectrum (Thrive) used with 98 CRI light engine up to 6,000 lumens

Driver| Specify from the Driver column.
Information below for
reference only.
---|---
98 CRY| D2W
D010 =0-10V Dimming, <1% to 100%, 120V-277V D2W; 800-2500 lumens, 98 CRI; 250-2000 lumens

1D010 = 0-10V Dimming, <1% to 100%, 120V, 98 CRI; 2500-4500 lumens

2D010 = 0-10V Dimming, <1% to 100%, 277V, 98 CRI; 2500-4500 lumens

3D010 = 0-10V Dimming, <1% to 100%, 347V dedicated driver D2W; 800-2500 lumens, 98 CRI; 800-3000 lumens, with step down transformer for 98 CRI 250, 500 and 3500-4500 lumens

| 250-4,500| 800-2,500
D010TR =0-10V (120-277V) or Phase-Cut (120V) dimming, 5-100%, D2W; 800-2500 lumens, 98 CRI; 250-2000 lumens

1D010TR = 0-10V or Phase-Cut Dimming, 120V, 98 CRI; 2500-3000 lumens

2D010TR = 0-10V Dimming, 277V, 98 CRI; 2500-3000 lumens

3D010TR = 0-10V Dimming, 347V with step down transformer, D2W; 800-2500 lumens, 98 CRI; 250-3000 lumens

| ****


250-3,000

| ****


800-2,500

DE010 =0-10V Dimming, 0% to 100%, 120V-277V, D2W; 800-2500 lumens and 98 CRI; 500-2000 lumens

1DE010 = 0-10V Dimming, 0% to 100%, 120V, 98 CRI; 2500-4500 lumens

2DE010 = 0-10V Dimming, 0% to 100%, 277V, 98 CRI; 2500-4500 lumens

3DE010 = 0-10V Dimming, 0% to 100%, 347V with step down transformer, D2W; 800-2500 lumens and 98 CRI; 500-4500 lumens

| ****


500-4,500

| ****


800-2,500

D5LT =Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V-277V, D2W; 800-2500 lumens, 98 CRI; 500-2000 lumens

1D5LT = Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 120V, 98 CRI; 2500-4500 lumens

2D5LT = Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 277V, 98 CRI; 2500-4500 lumens

3D5LT = Fifth Light® (DALI T6) Logarithmic Dimming, 0% to 100%, 347V with step down transformer, D2W; 800-2500 lumens, 98 CRI; 500-4500 lumens

| ****


500-4,500

| ****


800-2,500

DMX =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, D2W; 800-2500 lumens and 98 CRI; 800-2000 lumens (5)

1DMX = DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, 98 CRI; 2500-3000 lumens (5)

2DMX = DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, 98 CRI; 2500-3000 lumens (5)

3DMX = DMX/RDM Logarithmic Dimming, 0% to 100%, 347V with step down transformer, D2W; 800-2500 lumens and 98 CRI; 800-3000 lumens (5)

| ****


800-3,000

| ****


800-2,500

DMXC5 =DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V, RJ45 connection, D2W; 800-2500 lumens and 98 CRI; 800-2000 lumens(5)

1DMXC5 = DMX/RDM Logarithmic Dimming, 0% to 100%, 120V, RJ45 connection, 98 CRI; 2500-3000 lumens (5)

2DMXC5 = DMX/RDM Logarithmic Dimming, 0% to 100%, 277V, RJ45 connection, 98 CRI; 2500-3000 lumens (5)

3DMXC5 = DMX/RDM Logarithmic Dimming, 0% to 100%, 347V with step down transformer, RJ45 connection, D2W; 800-2500 lumens and 98 CRI; 800-3000 lumens (5)

| ****


800-3,000

| ****


800-2,500

DLE =Lutron Ecosystem dimming 1% to 100%, 120V-277V, 25’ Max remote length, D2W; 800-2500 lumens and 98 CRI; 800-2000 lumens

1DLE = Lutron Ecosystem dimming 1% to 100%, 120V, 25’ Max remote length, 98 CRI; 2500 lumens

2DLE = Lutron Ecosystem dimming 1% to 100%, 277V, 25’ Max remote length, 98 CRI; 2500 lumens

3DLE = Lutron Ecosystem dimming 1% to 100%, 347V with step-down transformer, 25’ Max remote length, D2W; 800-2500 lumens and 98 CRI; 800-2500 lumens

| ****


800-2,500

| ****


800-2,500

DLV =Low voltage dimming driver (1-100%) for use with DLVP system, D2W; 800-2500 lumens and 98 CRI; 800-2000 lumens (6)| 800-2,000| 800-2,500
DE010W2N2765 =Tunable white 0-10V Dimming, 2700K-6500K, 0% to 100%, 120V- 277V, 1000 lumens| |
DE010W2N2050 =Tunable white 0-10V Dimming, 2700K-6500K, 0% to 100%, 120V- 277V, 1000 lumens| |
D5LTW2N2765 =Tunable white Fifth Light® (DALI T6) Dimming, 0% to 100%, 2700K-6500K, 120V-277V, 1000 lumens| |
D5LTW2N2050 =Tunable white Fifth Light® (DALI T6) Dimming, 0% to 100%, 2000K-5000K, 120V-277V, 1000 lumens| |
Options (6) (30)| Controls
---|---
EMBOD =Bodine® Emergency Module with Remote Test Switch (10) EMBOD7ST =Bodine® Self Test Emergency Module with Remote Test Switch EMBOD6ST =Bodine® 6W Self Test Emergency Module with     EMV7 =7W Low Voltage Emergency Module with Remote Test Switch (7) Remote Test Switch EMV14 =14W Low Voltage Emergency Module with Remote Test Switch (7) EM7 =7W Emergency Module with Remote Test Switch ETRD =Emergency transfer device (31)

EM14 =14W Emergency Module with Remote Test Switch

| WPST =Factory installed Wavelinx (includes a control module, sensor, cable, tile mount and ceiling mount sensor) (11) (13)

WLST =Factory installed WaveLinx LITE Sensor Kit (11) (12)

WPN = WaveLinx PRO Wireless Node without sensor (15)

Accessories (Order separately) (25)

  • TRM4P =White metal trim ring (26)
  • LGSKT4IP66 =IP66 Gasket Kit
  • DT4RF =4 inch frosted acrylic ring (28)
  • PRR4 =Rimless Plaster Ring (26)
  • RKP4 =Knife Edge plaster Ring (27)
  • RPM4MW =Rimless Millwork Ring, Matte White (26)
  • RPM4MB =Rimless Millwork Ring, Matte Black (26)
  • RKM4MW =Knife Edge Millwork Ring, Matte White (27)
  • RKM4MB =Knife Edge Millwork Ring, Matte Black (27)
  • HSA4 =Slope Adapter for 4” Aperture Housings, Specify Slope (34)

Connected Lighting Systems (6) (11)

  • WPST =Field installed WaveLinx Sensor Kit (13)
  • WLST =Field installed WaveLinx LITE Sensor Kit (12)

Transformers

  • H347 =H347 for 98CRI 4000 lumens and below; D2W 4500 lumens and below; W2N 4000 lumens and below
  • H347200 =347 to 120V Step Down Transformer, 200VA

Bar Hangers

  • BAA-HB26 =C-channel Bar Hanger, 26” Long, Pair (1)
  • TAA-HB26 =C-channel Bar Hanger, 26” Long, Pair (1)
  • HB26 =C-channel Bar Hanger, 26” Long, Pair
  • HB50 =C-channel Bar Hanger, 50” Long, Pair
  • RMB22 =Wood Joist Bar Hanger, 22” Long, Pair

Notes:

  1. Only product configurations with these designated prefixes are built to be compliant with the Buy American Act of 1933 (BAA) or Trade Agreements Act of 1979 (TAA), respectively. Please refer to the DOMESTIC PREFERENCES website for more information. Components shipped separately may be separately analysed under domestic preference requirements. Offered with spun aluminium narrow (N), medium (M) and wide (W) trims.
  2. Nominal Lumens will vary depending on the selected colour, CRI, driver and reflector finish. Reference IES files.
  3. The product is marked spacing. Reference table on page
  4. For the spacing details.
  5. DMX fixtures default to full-on upon loss of DMX signal.
  6. Not available with Chicago Plenum.
  7. ULus listed only
  8. Offered up to 2500 lumens with D2W and 3500 with W2N
    • D010, D5LT, DE010 up to 4500 lumens with 98 CRI
    • D010TR, DMX up to 3000 lumens with 98 CRI
    • DLE, DL2 up to 2500 lumens with 98 CRI
  9. Not available for W2N
  10. Refer to system specifications for additional information, features, and benefits. Order either factory factory-installed option or an accessory. Use with 0-10V driver.
  11. WLST=WaveLinx LITE tile mount sensor kit for daylight dimming, PIR motion sensing, use with D010 only (Refer to WaveLinx LITE system specifications)
  12. WPST=WaveLinx wireless sensor kit for daylight dimming, PIR motion sensing, and optional RLTS – Real Time Location Services, use with 0-10V only.
  13. WPN = WaveLinx PRO wireless node provides luminaire-level control with scene and zone configuration without an integrated sensor; Connects wirelessly with daylight dimming sensor and PIR motion sensor if desired. Use with 0 10V driver only.
  14. PS available in self-flanged MW finish only
  15. Offered up to 2000 lumens
  16. The flange is the same finish as the reflector
  17. Requires knife edge ring accessory.
  18. Anodized or spun reflectors
  19. Die-cast only
  20. Available with narrow (N), medium (M) and medium 45-degree (MD) Spun Aluminum trims. Required for use with all IEMBOD, IEM7, IEM14, IEMV7 and IEMV14 housings. Not offered with remote driver.
  21. Offered with DLVP up to 2000 lumens with 98 CRI.
  22. Black or white paint.
  23. Accessories sold separately will be separately analyzed under domestic preference requirements. Consult the factory for further information.
  24. Order trim with polymer trim ring (Consult specification sheet for colour ordering information and options).
  25. Order die-cast trim with flange type 4
  26. Order with self-flanged trim.
  27. If using remote driver order battery and controls with the remote driver.
  28. 120V-277V
  29. Used to bypass local control during outage. Must be used in conjunction with UL 1008 device (provided by others)
  30. IC rated for 800 lumens
  31. IC rated for 1000 lumens
  32. Not recommended for use with Wall Wash

Typical Applications

  • Office
  • Education
  • Healthcare
  • Hospitality
  • Retail
  • Code-Compliance Areas
  • Sports Venues

PS52075122 November 13, 2023, 1:25 PM

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Portfolio User Manuals

Related Manuals