rizoma MI ZBW042 01 Headlight Fairing with Mounting Kit User Manual
- June 4, 2024
- rizoma
Table of Contents
User Manual
Welcome to Rizoma
MI ZBW042 01 Headlight Fairing with Mounting Kit
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide will allow you to mount and use the product correctly and enjoy all
the features it has.
For your protection and safety, RIZOMA expressly recommends that you have the
installation of the product performed by skilled personnel. Improper
installation, repair, or maintenance, can cause accidents. Keep this user
guide as a reference for the future.
Attention: This component comes assembled for shipping purposes
only. Tighten all fasteners to appropriate torque specifications before
riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped, or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace them with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your, safety Rizoma suggests always contacting your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Headlight fairing
Before you start mounting the product please check the completeness of the kit
on the part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components.
Warning: Make sure that your motorbike is standing firmly before you start
work, as a fall may lead to damage to the motorbike or injury to you or
others.
WARNING: TO CLEAN YOUR HEADLIGHT FAIRING DON’T USE DETERGENT AGGRESSIVE
PRODUCTS OR ABRASIVE SPONGES THAT CAN DAMAGE OR SCRATCH YOUR HEADLIGHT FAIRING
BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
WARNING: DO NOT EVER TRY TO CLEAN OR ADJUST THE HEADLIGHT FAIRING DURING
DRIVING THE MOTORCYCLE. THE BIKER WILL HAVE A REDUCED CAPACITY TO KEEP CONTROL
OF THE MOTORCYCLE IF THE BIKER REMOVES THE HANDS FROM THE HANDLEBAR DURING
DRIVING. IF YOU ATTEMPT TO CLEAN OR ADJUST THE HEADLIGHT FAIRING WHILST
DRIVING THE MOTORCYCLE YOU COULD LOSE CONTROL AND HAVE AN ACCIDENT
INSTALL BRACKETS
INSTALL HEADLIGHT FAIRING WITH CLIP-ON BARS KIT
CHECK MINIMUM CLEARANCE
CHECK DASHBOARD
INSTALL PROTECTION RUBBER POSITIONING **WIRING RH SIDE WITH
HANDLEBAR**
POSITIONING WIRING LH SIDE WITH HANDLEBAR
POSITIONING WIRING RH SIDE WITH CLIP-ON BAR
POSITIONING WIRING LH SIDE WITH CLIP-ON BAR
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based on contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full-face helmet), that has been approved by ANSI, SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
styles, such as full-finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal note
Some of our products may not be approved for road circulation in the countries
where homologation is required. Thus RIZOMA® Srl declines any responsibility
for different use of its products.