MONSTER MH22116 Melody Earbuds User Guide
- June 4, 2024
- Monster
Table of Contents
MONSTER MH22116 Melody Earbuds
Product Overview
Earphone x 2 (left & right)
Charging box
Earphone support x 3 pairs (Model M has been installed on the earphones)
Earphone cap x 3 pairs (Model M has been installed on the earphones) USB-C
charging cable
Quick tour and warranty bill
- Earphone support
- Touch type multi-functional button (MFB)
- LED indicator
- Charging contact
- Earphone cap
- USB-C charging interface
- Charging box battery indicator
Try the earphone caps of different sizes to find the most comfortable size
Twist the earphone, until it is firmly and comfortably put on
Power on/off
Once the charging box is opened, the earphone will start up automatically. To turn off the earphone, please put the earphone into the charging box, and close the charging box, the earphone will shut down for battery charging.
Battery charging of the charging box
Use the accessory USB-C charging cable for battery charging, and the charging box’s indicator will display the charging status. When the charging box is fully charged, the charging box’s indicator will be normally on.
Pairing
Open the charging box, then it will start up automatically. Wait for a few
seconds, the L/R earphones will be connected automatically, then you can hear
the voice prompt of
“pairing”. For new device connection, please turn on the device’s bluetooth
and search the Monster device for pairing, and after successful connection,
you will hear the voice prompt of “connected”.
If the earphone has been paired, it will try connecting with the previously
paired device after startup. If you need pairing with a new device, please
disconnect the bluetooth connection with the current device, then carry out
repairing with the new device.
Volume Control
The earphone is not provided with the volume adjustment function. In order to adjust the volume, use the volume adjustment keys of your mobile device, after the bluetooth earphone is successfully connected with your mobile device, to turn up or turn down the volume.
In-call
- Answer a call: Single click the MFB button.
- End a call: Double click the MFB button.
- Refuse a call: Press and hold the MFB button for 2 seconds.
Music
Play/pause music: Single click the MFB button. Previous song: Double click the left earphone’s MFB button. Next song: Double click the right earphone’s MFB button.
Voice Control
When the earphone is connected with your mobile phone, triple click the multi- function touch button of the left earphone or right earphone to activate the voice assistant, and single click to turn off the voice assistant.
Restore factory settings
Under power-on status, successively click the MFB button of either earphone for five times, then the left and right earphones will simultaneously blink for three times, indicating that the earphones have been restored to the factory settings.
LED Indicator Guide
| Mode | Description | Voice Prompt |
|---|---|---|
| Power On | – | “Power On” |
| Power Off | – | “Power Off ” |
| Pairing | The primary earphone’s white LED indicator blinks swiftly | “Pairing” |
| Connected | The indicator becomes off after successful connection | “Connected” |
| Earphones charging | When the earphone is undergoing charging, the earphone’s |
indicator blinks slowly, and then becomes off after the battery is fully charged|
–
Charging case
| In charging, the charging box’s indicator blinks slowly, and then becomes off after the battery is fully charged|
–
Cautions
- Please place the earphones in the correct location (L/R) for normal charging.
- Replacement of battery (on your own) is not recommended.
- Do not expose battery (battery pack) to excessive heat such as direct sunlight or fire.
FCC Statement
or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AVD2- MH22116
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
IC Warning statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>