kogan KACRCGPWMGA 2 In 1 15W Car Phone and Watch Charger User Guide
- May 15, 2024
- Kogan
Table of Contents
User Guide KOGAN 2-IN-1 15W CAR PHONE
AND WATCH CHARGER
MAGSAFE COMPATIBLE
KACRCGPWMGA
SAFETY & WARNINGS
Warnings
- Do not place the charger in temperatures below 0°C (32°F) or above 60°C (140°F).
- Do not attempt to disassemble the charger, expose it to an open flame or submerge it in water to avoid damaging the charger.
- Always check for damage to the charger, cables or other accessories before using the charger. If damaged, cease use immediately and contact help.Kogan.com.
- Do not attempt to disassemble or modify the charger in any way, as it may cause serious damage.
- Do not expose the charger to extremely hot, humid or corrosive environments to avoid damaging the charger.
Important Reminders
- This charger is compatible with Mag Safe-enabled iPhones cases.
- The maximum output of this charger is 15W. Its maximum output for iPhones is 7.5W.
- Only use the cable provided with the charger. Third-party cables may interfere with charging.
- This charger requires a charging adapter that supports QC or PD fast charging and an output of at least 18W.
- This charger will only attach to caseless iPhone 13/12 series phones and official MagSafe cases. It will not attach to any other phones or cases.
COMPONENTS
- 2-in-1 15W Car Phone and Watch Charger.
- USB-A to USB-C Cable.
- Magnetic Ring.
- Vent Mount.
- Adhesive Dashboard Pad Mount.
- Suction Mount.
OVERVIEW
OPERATION
- Connect the USB-A end of the provided charging cable to a power adapter (not provided), and the USB-C end to the USB-C port on the charger.
- Connect the power adapter (not provided) to the 12V accessory outlet in your car.
- Place your MagSafe phone on the charging pad. If your phone is not MagSafe, attach the provided magnetic ring to your phone.
Error Detected
- If an error is detected, check that your phone supports wireless charging and does not have any credit cards, stands or other metal attachments on the back (other than the magnetic ring).
- After checking the above, unplug and plug in the charging cable again to resume charging.
Mounts
| |
---|---|---
Vent Mount| Adhesive Dashboard Pad Mount| Suction Mount
Vent Mount
**** | **** |
---|
Adhesive Dashboard Pad Mount
Suction Mount
NOTES
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>