eRapta AWT7 Wireless Backup Camera 7 Inch Rear View Monitor Kit HD 1080P User Guide

: May 15, 2024
: eRapta

Table of Contents

eRapta AWT7 Wireless Backup Camera 7 Inch Rear View Monitor Kit HD 1080P
WHATS IN THE PACKAGE
SPECIFICATIONS
SAFETY PRECAUTIONS
INSTALLATION
OPERATING INSTRUCTION
TROUBLESHOOTING
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eRapta AWT7 Wireless Backup Camera 7 Inch Rear View Monitor Kit HD 1080P

Specifications

Monitor:
- Monitor Size: 7 inch Monitor
- Monitor Cable Connector Type: 4.92ft Power Cable
- Item Weight: 7.3 pounds
- Power Supply: DC 12V
- Monitor Working Current: 300 mA
Bracket:
- Suction Cup Bracket
Camera:
- Image Sensor: AHD CMOS
- Camera Working Current: 300 mA
- Effective Pixels: 1080P
- Waterproof Rating: IP69K
- Material: Metal

Safety Precautions

Incorrect installation might cause personal injury or property damage. Contact eRapta customer service for assistance if needed. Handle all components with care. Inspect regularly to avoid damage to components and cabling.
Do not apply excessive force to any of the components contained within this kit to prevent damage or non-functionality. Do not disassemble or attempt to repair any part of the camera system. Children should be supervised to ensure they do not play with the appliance. To avoid electrical shock hazards, actions should be performed by qualified and certified professionals. Disconnect all sources of power to the camera before installing.

Installation Instructions

Installation Diagram
Power the monitor by the car charger or power cable. Power the camera by connecting the red wire to the positive power of the reversing light and the black wire to ground.

FAQ

Q: What should I do if any item is damaged or missing from the package?
A: Contact eRapta at sales2@erapta.com with your order number from Amazon and include photos of the damaged or missing part for quick assistance.

eRapta Wireless 7 Inch Backup Camera System Installation&Operation Guide
(Model: AWT7)
If you have any issues or needs, please contact us at: sales2@erapta.com

PLEASE NOTE

Before operating this backup system, please read these instructions completely.
We recommend that you retain this guide with the system as a ready reference.
If you have any questions, or if you require technical support, please contact us at this email address: sales2@erapta.com
We will respond within 24-hours to provide you with the support you require.
Please record our email for future reference, if needed.
If you encounter the following:
1. When opened, it is found to be defective or missing parts;
2. You don’t like it when you received;
3. Need technical support and help during the installation process;
4. Camera or monitor gets accident during use;
5. You order a wrong item;
6. Any other after-sales problems that need help.

Please contact us in time, we will provide you with the best service and technical support, and solve the problems.
This is our contact Email: sales2@erapta.com (24 hours online)

WHATS IN THE PACKAGE

Make sure your package includes the following listed items completely. If any item is damaged or missing, contact us at sales2@erapta.com. It would be better if you write down the order number from Amazon, include photos of the damaged or missing part in your email, so that we can handle the problem much more quickly.

SPECIFICATIONS

Monitor

SAFETY PRECAUTIONS

Incorrect installation might cause personal injury or property damage. Contact eRapta customer service for assistance if needed.

NOTE: Handle all components with care. Inspect regularly to avoid damage to components and cabling.

NOTE: Do not apply excessive force to any of the components contained within this kit. Otherwise, it might result in damaged or non-functional parts.

Do not disassemble or attempt to repair any part of the camera system.
Children should be supervised to ensure that they do not play with the appliance.
To avoid an electrical shock hazard, relevant actions should be performed by qualified and certified professionals. Disconnect all sources of power to the camera before installing.
To reduce the risk of fire, no test when smoking. No use a flame.
Use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction.
Where the power cable may press a metal case, cover the cable with a friction tape. A short circuit or disconnected wire may cause a fire.
Do not install the monitor where it may obstruct drivers view or obstruct an airbag device.
Do not operate the monitor while driving, as it may cause an accident.
Dropping the unit may cause possible mechanical failure.

INSTALLATION

Ensure the power supply circuit has circuit protection
Use insulated tools when working with power supply
Use correct safety equipment when working at elevated levels
Do not allow water to enter the LCD Display
Excessive heat can be caused by a loose connection

Installation Diagram

Power the monitor by the car charger or power cable.
Power the camera by a red and black wire(red wire to positive power of reversing light, black to ground)

Installation of the Camera

Take off your rear license plate.
Using a screwdriver, remove each of the screws holding your rear license plate in place. Then, pull the plate off and set it aside. NOTE: Make sure you place the screws in a safe place so you don’t lose them.
Drill a small hole in the license plate mounting area
Drill a small hole in the license plate mounting area so you can run the cable into the trunk.
Hold your camera up to the area you intend to mount it to figure out where to make the hole and mark the fixed position and note the spot where its splitting cord sits.
Then, create a small hole in the car using a power drill. Line up your hole so it is directly behind where your camera’s power cable will go.
NOTE :The hole doesn’t have to be very big, just large enough for the cable. (It is about a 1⁄8 or 1⁄4 inch hole)
NOTE : Ensure that there are no obstructions between the license plate mount and the rear wiring chamber and you’re not drilling into anything you shouldn’t be.
NOTE : If you come across any obstructions, try to remove them. If you can’t, see if you can make a hole nearby.
Power the camera
Power the camera by a red and black wire.
(red wire to positive power of reversing light, black to ground or negative power).
Note: Camera is connected to the reverse lights and channel 2, and the monitor automatically lights up when reversing. (When not reversing, the screen enters standby mode, and there is no need to turn off the monitor power).

Installation of the Monitor

Mount two antennas to the monitor.
Mount the bracket. Aim the suction cup at the screw holes and press down firmly, then tighten the screw. When sucking press the suction cup base tightly and pull the handle down.
Power the monitor.
Insert the adapter into the jack of the monitor. Power the monitor by the car cigarette lighter.
If you don’t want to use the car charger, you can power monitor by hard wiring, connect the power cable to the adapter from the monitor, Then attach the red wire to the car reversing switch and the black wire to the ground.

NOTE

Some states or local governments may have regulations or laws that restrict the use of anything that might impair the clear view of a license plate. Check local laws for compliance.
These instructions are only meant as a general guide due to the number of different makes and models of vehicles. For vehicle-specific questions, contact your vehicle’s manufacturer.
This backup camera fits a standard license plate hole for US. If you choose not to mount it on your license plate, locate a good place to mount the camera. Make sure that the camera’s field of vision is free of obstructions (bumpers, hitches,etc.).The camera should be positioned as close to the center of the vehicle as possible.

OPERATING INSTRUCTION

Monitoring Operation

Settings Operation

Main-panels	Sub-panels
PAIRING	Automatically matched when the power is connected, wait for the

countdown to end to pair successfully.
PICTURE| brightness/contrast/hue
MIR-FLIP| Normal/ Mirror/ Flip/ MIR-Flip
SYSTEM| language/P-Line

PAIRING

Install and tighten antennas on monitor and camera. put the camera very close to monitor (within 5ft).
Press Menu pairing.
Wait for the end of the countdown to use.

PICTURE

Press (into next time setting) (return to the menu )

MIR-FLIP

Press (into next time setting) (return to the menu )

system

Press (into next time setting) (return to the menu )

TROUBLESHOOTING

Why is the monitor in black screen?
Check if the monitor is powering on and press the power button to see if the monitor turn on. If you are sure the monitor has power and it does not respond to the on/off button, then disconnect it from the power and reconnecting.
Check if the camera is powered. The monitor can only be used normally when monitor and camera are powered.
Check there is 12v going to the monitor. If there is still no improvement, maybe the monitor has been subjected to some collision during transportation or use, please contact us and we will help you: sales2@erapta.com.
Why is the monitor no signal or blue?
N o sig nal or blue screen is the camera is not turned on and it doesn’t pair with camera.
Check if the camera is powered up first.
Pair the camera with the monitor up close (within 5ft) and wait until the pair is successful, and the monitor will work.
If there is still no improvement, please contact us to send you an extension antenna or replacement.
Why does the camera gets blurry or foggy?
Check the external lenses. Clean them by simply wiping off the dirty.
Check if there any loose or faulty connections triggering such mishaps.
There is moisture inside the camera’s lenses. The changes between high and low temperature will cause fogging problems, just wait a few hours and it will return to normal.
If there is still no improvement, maybe the camera has been subjected to some collision during transportation or use,or it is a defective product, please contact us and we will help you:
sales2@erapta.com
What if anything defective or lost when I open the package?
If you have any accessory damage or problems with your camera, please feel free to contact us: sales2@erapta.com.
What should I do if the camera is flooded?
Some cameras may accidentally enter water due to heavy rain or when washing the car, which will make the screen appear blurry. Under normal circumstances, the moisture in the camera will dissipate on its own. If it does not subside for a period of time, please contact the after-sales service for a replacement.
After installation, the image has obvious distortion and stripes flickering.
This may be caused by unstable voltage, please check the power supply connected to the monitor is in the right range. Using car charger to power the monitor.
For your safety, it is recommended that you go to auto repair shop to check your vehicle’s voltage problem.

NOTE

Please tell us more details about your questions or problems.
If you don’t mind, it would be better to attach pictures or videos.
Please provide the Amazon order ID of the product you purchased
All the messages will be replied to with in 24 hours, please wait kindly.

Warranty

eRapta offers a full 24 months warranty and replacement policy. We also provide lifetime technical support to ensure that you enjoy your modern backup camera for many years to come.
To obtain warranty support, or if you are not satisfied in any way, or have any issues with your purchase, please contact us first for help, to instead of return or negative content.
We promise that you will receive the best service from us, and we will try our best to help you until your problem solved.
Every message will be replied with in 24h. Our contact email is: sales2@erapta.com, you can write it down or add it to your address book.

Contact Ema il: sales2@erapta.com
Contact Name :eRapta Support Department