eRapta AY7 Backup Camera for Truck 7 Inch HD 1080P Front Rear View Monitor kit Instruction Manual

eRapta AY7 Backup Camera for Truck 7 Inch HD 1080P Front Rear View

Monitor kit

Product Information

The eRapta HD Wired 7 Backup Camera System is a reliable and convenient backup system designed to enhance safety while reversing or parking your vehicle. This system includes a 7-inch LCD monitor and a waterproof camera with advanced features such as an AHD CMOS image sensor and IP69K waterproof rating. The monitor is powered by a DC 12V power supply and has a working current of 250 mA. The camera has an operating current of 200 mA and offers high-resolution images with effective pixels of 1920(H) x 1080(V). The extension cable included in the package has a 4-pin connector and measures 32.8 feet in length. The entire system is built with durable materials to ensure long-lasting performance.

Product Usage Instructions

1. Before operating the eRapta HD Wired 7 Backup Camera System, it is important to read the instructions manual completely.
2. Ensure that you have all the items listed in the package. If any item is damaged or missing, contact eRapta customer service at [email protected]. Provide the order number and include photos of the damaged or missing part for quick resolution.
3. Handle all components with care to avoid damage. Regularly inspect the components and cabling to ensure they are in good condition.
4. Do not apply excessive force to any of the components as it may result in damage or non-functionality.
5. Do not disassemble or attempt to repair any part of the camera system. Contact eRapta customer service for assistance if needed.
6. Ensure that children are supervised to prevent them from playing with the appliance.
7. For installation, it is recommended to seek assistance from qualified and certified professionals to avoid electrical shock hazards.
8. Before installing the camera, disconnect all sources of power to ensure safety.

If you have any questions, need technical support, or encounter any issues during the installation process or while using the camera or monitor, contact eRapta customer service at
[email protected]. They will provide you with the best service and technical support to resolve any problems you may have.

PLEASE NOTE

• Before operating this backup system, please read these instructions completely.
• We recommend that you retain this guide with the system as a ready reference.
• If you have any questions, or if you require technical support, please contact us at this email address: [email protected]
• We will respond within 24 hours to provide you with the support you require.
• Please record our email for future reference, if needed.
• If you encounter the following:
  • When opened, it is found to be defective or missing parts;
  • You don’t like it when you receive;
  • Need technical support and help during the installation process;
  • Camera or monitor gets accident during use;
  • You order the wrong item;
  • Any other after-sales problems that need help.

Please contact us in time, we will provide you with the best service and technical support, and solve the problems.
This is our contact Email: [email protected] (24 hours online)

WHAT IN THE PACKAGE

Make sure your package includes the following listed items completely. If any item is damaged or missing, contact us at [email protected]. It would be better if you write down the order number from Amazon, include photos of the damaged or missing part in your email, so that we can handle the problem much more quickly.

SPECIFICATIONS

Monitor

LCD Size| 7 inch Monitor
Monitor Cable| 1.69ft
Connector Type| 4-pin
Item Weight| 2.025 pounds

Power Supply

| ****

DC 12V

Monitor Working Current

| ****

250 mA

Monitor Dimensions| 7.2(L)4.73(W)0.78(D) inches
Camera

Image Sensor

| ****

AHD CMOS

Camera Working Current

| ****

200 mA

Effective Pixels| 1920(H)x 1080(V)
Waterproof Rating| ****

IP69K

Material| Metal

Operating temperature

| ****

-4°F~ 149°F

Extension cable

| 4pin connector
32.8ft

SAFETY PRECAUTIONS

Incorrect installation might cause personal injury or property damage. Contact eRapta customer service for assistance if needed.

NOTE: Handle all components with care. Inspect regularly to avoid damage to components and cabling.
NOTE: Do not apply excessive force to any of the components contained within this kit. Otherwise, it might result in damaged or non-functional parts.

• Do not disassemble or attempt to repair any part of the camera system.
• Children should be supervised to ensure that they do not play with the appliance.
• To avoid an electrical shock hazard, relevant actions should be performed by qualified and certified professionals. Disconnect all sources of power to the camera before installing.
• To reduce the risk of fire, no test when smoking. No use of a flame.
• Use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction.
• Where the power cable may press a metal case, cover the cable with friction tape. A short circuit or disconnected wire may cause a fire.
• Do not install the monitor where it may obstruct the driver’s view or obstruct an airbag device.
• Do not operate the monitor while driving, as it may cause an accident.
• Dropping the unit may cause possible mechanical failure.

INSTALLATION

• Ensure the power supply circuit has circuit protection
• Use insulated tools when working with a power supply
• Use correct safety equipment when working at elevated levels
• Do not allow water to enter the LCD Display
• Excessive heat can be caused by a loose connection

Installation Diagram
Connect the 12V Car Charger to the DC female connector of the extension cable.The 4-pin connector to the camera and monitor as the schematic showed

Installation of the Camera

Take off your rear license plate.
Using a screwdriver, remove each of the screws holding your rear license plate in place. Then, pull the plate off and set it aside.

NOTE : Make sure you place the screws in a safe place so you don’t lose them

• Drill a small hole in the license plate mounting area
• Drill a small hole in the license plate mounting area so you can run the cable into the trunk.
• Hold your camera up to the area you intend to mount it to figure out where to make the hole mark the fixed position and note the spot where its splitting cord sits

Then, create a small hole in the car using a power drill. Line up your hole so it is directly behind where your camera’s power cable will go.

• NOTE: The hole doesn’t have to be very big, just large enough for the cable. (It is about a 1⁄8 or 1⁄4 inch hole)
• NOTE: Ensure that there are no obstructions between the license plate mount and the rear wiring chamber and you’re not drilling into anything you shouldn’t be.
• NOTE: If you come across any obstructions, try to remove them. If you can’t, see if you can make a hole nearby.
• Run the camera cable from outside of the car into the trunk of your car.
• Attach the camera cable you ran through the hole to the single 4-pin connector of the extension cable. Run the other end (the 4-pin connector and a DC female connector) of the extension cable to the front of the car.
• Connect the monitor cable to the 4-pin connector and attach the DC female connector to the car charger.
• Plug the car charger into the car socket and test the system to make sure everything works.

Installation of the Monitor

Via Suction Cup

• Place the locking screw and suction cup on the back of the monitor and adjust the monitor to the desired viewing angle. Then tighten the locking screw to secure the monitor.
• Clean the area on the windshield or dashboard where the suction cup base is to be mounted. Press the suction cup base against the windshield or dashboard and move the locking lever towards the suction cup base. Connect the monitor cable to the 4pin connector

Via Fixed Bracket

• Place the locking screw and fixed bracket on the back of the monitor and adjust the monitor to the desired viewing angle. Then tighten the locking screw to secure the monitor.
• Clear the dashboard to fix the sticky sticker on the dashboard and put the screen on it.
• Connect the monitor cable to the 4pin connector

NOTE:

1. Some states or local governments may have regulations or laws that restrict the use of anything that might impair the clear view of a license plate. Check local laws for compliance.
2. These instructions are only meant as a general guide due to the number of different makes and models of vehicles. For vehicle-specific questions, contact your vehicle’s manufacturer.
3. This backup camera fits a standard license plate hole for the US. If you choose not to mount it on your license plate, locate a good place to mount the camera. Make sure that the camera’s field of vision is free of obstructions (bumpers, hitches, etc.).The camera should be positioned as close to the center of the vehicle as possible

OPERATING INSTRUCTION

Monitoring Operation

Settings Operation
The following graphic illustrates the layout of the software management system (SMS) panels and their associated sub-panels. Please note that you can press the buttons of monitor or use the remote to access or modify the SMS panels. While they may appear to be complicated, they are not.

Main-panels/Sub-panels

• PIC brightness/contrast/saturation
• CAR car line/car delay
• MODE rotate zoom/ mirror 1/mirror
• SYS language/ screen save /reset/version

NOTE:

• button is the on/off button for the parking guidelines. When the auxiliary line is off, press the menu button once to enter the menu
• When the auxiliary line is on, press the menu button four times to enter the menu system

PIC

CAR

MENU (return to the menu

• CAR LINE : There are 3 styles for chosen: Mode1, Mode2, Mode3, OFF
• CAR DELAY : This is the reverse delay, you can choose: 3s, 6s, 9s, Off.

MODE

• ROTATE: This can be flipped up, down, left and right according to your needs
• ZOOM: This is to adjust the screen ratio 16:9 /4:3
• Mirror 1: This is the mirror function of the camera.
• Mirror 2 : Please ignore the setting

SYS

• LANGUAGE: There are many language: it defaults to English.
• SCREEN SAVE: 1/3/5 minutes

Parking Guidelines Operation

• Press the button to adjust the parking guidelines if the guidelines function is on.
• Note: Setting the parking guidelines’ shape or position when the top right shows H/ V/ M

|

H means Horizontal moving the lines.

Press the Menu button 1 time: enter H adjust mode, then press to move the lines to the left or right. Wait 15 seconds to confirm and exit setup mode automatically.

---|---

|

V means vertical moving the lines.

Press the Menu button 2 times: enter V adjust mode, and press to move the lines up or down. Wait 15 seconds to confirm and exit setup mode automatically.

| W means the width of the lines.

Press the Menu button 3 times: enter W adjust mode, press to adjust its width. Wait 15 seconds to confirm and exit setup mode automatically.

Remote Control Operation

(2) Video Select: Channel switch
(3) Menu: Go in setting page
(4) Mode Select: Channel switch
(5) ▲ Down/ Decrease
(6) ▼Up/ Increase

TROUBLESHOOTING

Why is the monitor on a black screen?

• It may be caused by loose or improperly connected wires, please check the connection. Check if the ground to the camera was slightly loose, and try to get the ground wire secured better
• Check if the display is powered on. Press the power button to see if the display turns on. If you are sure the monitor has power and it does not respond to the on/off button, then disconnect it from the power and reconnect.
• Check there is 12v going to the monitor.
• If there is still no improvement, maybe the screen has been subjected to some collision during transportation or use, please contact us and we will help you: [email protected]

Why is the monitor no signal or blue?

• Do a hard reset, unplug all cables, leave them out for 1 minute, and then re-connect them.
• Ensure the connection to the camera is tight enough.
• Verify the red positive trigger on the power harness cable is put to power 12v+.
• Check the pins of the 4 pins cable of the camera if it’s aligned or broken. If the pins are awkward, you can gently straighten them. If there is a shortage in the cable, please contact us for a replacement cable.
• Check the fuses to ensure everything is connected (without blown) and go and trace the wiring and cables from the camera to the display. Check for broken wires in the harness. Confirm the camera LED is on.
• If there is still no improvement, maybe the screen has been subjected to some collision during transportation or use, please contact us and we will help you: [email protected]

Why does the camera get blurry or foggy?

• Check the external lenses. Clean them by simply wiping off the dirt.
• Check if there are any loose or faulty connections triggering such mishaps.
• There is moisture inside the camera’s lenses. The changes between high and low temperatures will cause fogging problems, just wait a few hours and it will return to normal.
• If there is still no improvement, maybe the camera has been subjected to some collision during transportation or use, or it is a defective product, please contact us and we will help you: [email protected]

Why does the camera have a black-and-white image?

• Fraying wires or faulty connections can cause a flashing black-and-white camera. Make sure all of the cables and connections in your backup camera system are fully connected and check if there is any damage.

What if anything is defective or lost when I open the package?

• If you have any accessory damage or problems with your camera, please feel free to contact us : at [email protected]

What should I do if the camera is flooded?

• Some cameras may accidentally enter water due to heavy rain or when washing the car, which will make the screen appear blurry. Under normal circumstances, the moisture in the camera will dissipate on its own. If it does not subside for some time, please contact the after-sales service for a replacement.

After installation, the image has obvious distortion and stripes flickering.

• This may be caused by unstable voltage, please contact us and we will send you a replacement rectifier.

NOTE

• Please tell us more details about your questions or problems.
• If you don’t mind, it would be better to attach pictures or videos.
• Please provide the Amazon order ID of the product you purchased
• All the messages will be replied to within 24 hours, please wait kindly.

Warranty

• eRapta offers a full 24-month warranty and replacement policy. We also provide lifetime technical support to ensure that you enjoy your modern backup camera for many years to come.
• To obtain warranty support, or if you are not satisfied in any way, or have any issues with your purchase, please contact us first for help, instead of returning or negative content.
• We promise that you will receive the best service from us, and we will try our best to help you until your problem is solved.
• Every message will be replied to within 24 hours. Our contact email is: [email protected], you can write it down or add it to your address

MORE INFORMATION

• Contact Email:[email protected]
• Contact Name: eRapta Support Department

References

• eRapta sells the best car reversing camera at a fair price – eRapta is a company focused on car camera products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>