eRapta ERT01 HD License Plate Wired Camera System Installation Guide

eRapta ERT01 HD License Plate Wired Camera System

Product Information

• Product Name: eRapta HD License Plate Wired Camera System
• Model: T01
• Compatibility: CVBS
• Power Supply: DC 12-24V
• Camera Working Current: 400 mA
• Effective Pixels: 720P
• Waterproof Rating: IP69K
• Material: Metal
• Cable: 4 Pin/RCA connector, 26ft long
• Dimensions: 9.4(L) x 0.8(W) x 1(H) inches
• Weight: 0.32 pounds

Product Usage Instructions

1. Before operating the backup system, read the instructions manual completely.
2. Make sure all the items listed below are included in the package:
   • 1 x eRapta HD License Plate Wired Camera System
   • 1 x Monitor (Option 1) or $30 Amazon Gift Card Code (Option 2) Dash Camera (Option 3) Car Vacuum Cleaner (Option 4) or Car MP3 Bluetooth Dual USB Port Charger (Option 5)

If any item is damaged or missing, contact eRapta at sales2@erapta.com. Include the order number from Amazon and photos of the damaged or missing part in the email for quick problem resolution.

1. Ensure the power supply is DC 12-24V.
2. Handle all components with care and inspect them regularly to avoid damage.
3. Do not apply excessive force to any of the components to prevent damage or malfunction.
4. If you encounter any issues or need technical support during installation or use, contact eRapta customer service at sales2@erapta.com. They will respond within 24 hours to provide assistance.

For more detailed information and safety precautions, please refer to the complete instructions manual provided with the product.

INSTRUCTIONS

PLEASE NOTE:

• Before operating this backup system, please read these instructions completely.
• We recommend that you retain this guide with the system as a ready reference.
• If you have any questions, or if you require technical support, please contact us at this email address: sales2@erapta.com
• We will respond within 24 hours to provide you with the support you require.
• Please record our email for future reference, if needed.
• If you encounter the following:

1. When opened, it is found to be defective or missing parts;
2. You don’t like it when you receive;
3. Need technical support and help during the installation process;
4. Camera gets accident during use;
5. You order the wrong item;
6. Any other after-sales problems that need help.
   • Please contact us in time, we will provide you with the best service and technical support, and solve the problems.
   • This is our contact Email: sales2@erapta.com (24 hours online)

USEFUL ACCESSORY

• To thank the support of our customers, we will provide one of the free useful accessories to help you install or use our system more easily.
• You may choose one of the below accessories that you deem useful along with your Amazon
• Order ID and send it via email: sales2@erapta.com. (priority) to us. We will send it out to you without cost ASAP.
• Please mark down our service email address and contact us if needed.
• Hope that you can be satisfied with the purchase from eRapta.

WHAT IN THE PACKAGE

Make sure your package includes the following listed items completely. If any item is damaged or missing, contact us at sales2@erapta.com. It would be better if you write down the order number from Amazon, include photos of the damaged or missing part in your email, so that we can handle the problem much more quickly.

SPECIFICATIONS

Camera

**** Compatibility|

CVBS

Power Supply| DC 12-24V
Camera Working Current| 400 mA
Effective Pixels| 720P
Waterproof Rating| ****

IP69K

Operating Temperature| -4°F~ 149°F
Material| Metal
*** Cable| 4 Pin/ RCA connector
26ft
Dimensions| 9.4(L)0.8(W)*1(H) inches
Item Weight| 0.32 pounds

SAFETY PRECAUTIONS

• Incorrect installation might cause personal injury or property damage.
• Contact eRapta customer service for assistance if needed.
  • NOTE: Handle all components with care. Inspect regularly to avoid damage to components and cabling.
  • NOTE: Do not apply excessive force to any of the components contained within this kit. Otherwise, it might result in damaged or non-functional parts.
• Do not disassemble or attempt to repair any part of the camera system.
• Children should be supervised to ensure that they do not play with the appliance.
• To avoid an electrical shock hazard, relevant actions should be performed by qualified and certified professionals. Disconnect all sources of power to the camera before installing.
• To reduce the risk of fire, no test when smoking. No use of a flame.
• Use this product within the voltage range specified. Failure to do so can cause electronic shock or product malfunction.
• Where the power cable may press a metal case, cover the cable with friction tape. A short circuit or disconnected wire may cause a fire.

INSTALLATION

• Ensure the power supply circuit has circuit protection
• Use insulated tools when working with a power supply
• Use correct safety equipment when working at elevated levels
• Please test the product before installation to see if it works properly.
• If the product works properly after inspection, please install it. If not, please contact us promptly to return it.

Installation Diagram

Powered by the reversing light, the camera is connected to the power cable through the 4pin connector and then connected to your screen through the extension cable RCA connector.

Installation of the Camera

Take off your rear license plate.
Using a screwdriver, remove each of the screws holding your rear license plate in place. Then, pull the plate off and set it aside.
NOTE : Make sure you place the screws in a safe place so you don’t lose them.

Drill a small hole in the license plate mounting area
Drill a small hole in the license plate mounting area so you can run the cable into the trunk. Hold your camera up to the area you intend to mount it to figure out where to make the hole and mark the fixed position and note the spot where its splitting cord sits.
Then, create a small hole in the car using a power drill. Line up your hole so it is directly behind where your camera’s power cable will go.

• NOTE: The hole doesn’t have to be very big, just large enough for the cable. (It is about a 1⁄8 or 1⁄4 inch hole)
• NOTE: Ensure that there are no obstructions between the license plate mount and the rear wiring chamber and you’re not drilling into anything you shouldn’t be.
• NOTE: If you come across any obstructions, try to remove them. If you can’t, see if you can make a hole nearby.

Run the camera cable from outside of the car into the trunk of your car.

Wire Connection

1. Plug the 4Pin cable of the camera cable into the 4Pin connector of the power cable. (Use the arrows to align).
2. Red thin wire connected to your reversing light (positive power), black thin wire connected to metal or ground wire (negative power).
   • NOTE: the power supply for the camera must come from a reversing light. The power source can also be from the constant 12V power source, but the camera will always be on.
3. Connect the RCA port of the power cable to the RCA extension cable， then wire in the car along the existing backbone harness, running the extension cable.
4. Connect the yellow RCA port of the extension cable to your monitor (if your RCA port is already connected, then the red trigger wire can be ignored. If you don’t want to connect the yellow RCA port, you can energize the red trigger wire to the monitor)
5. Test: when the car in reverse, the reverse lights should turn on – you may need your key on for this. The power from the reverse lights will power up the camera and should trigger the monitor to display. If the monitor does not automatically switch to the display then you will need to adjust a setting in the menu. Look for “camera input” or “reversing”

Other Descriptions

The function of the Camera Wire

1. Cutting white wire will close the parking guidelines ( default with guidelines).
2. Cutting the green wire will switch the image to facing front view (the default is mirror rear view).
   • NOTE: If you cut the camera cable, you need to disconnect the power of the camera and reconnect it, so that the function will be displayed.

Small Bracket

• If you want to use the small bracket to install, you can use a screwdriver to remove the large bracket, replace it with the small bracket, and then install it in the location you want, but it requires drilling.

Additional Notes

1. Please connect the wire tightly.
2. If the camera is connected to the fuse box, you need to pay attention to the loss of power in the vehicle battery, a prolonged loss of power will affect the start of the vehicle.
3. If the voltage is too high, the long-term work will lead to damage to the camera.
4. The camera is CVBS, please check if your head unit is compatible with CVBS.
5. If you don’t need the guidelines, you can cut the white wire/ loop. If you still need to use it after cutting it off, please reattach it.

TROUBLESHOOTING

• Q: How should the product be installed?
• A: Connect the red wire of the power cord to the positive power source of the reversing light and the black wire of the power cord to the ground or negative power source. Here is the video of our product installation: https://youtu.be/asa_laH_06Q.
• Q: Why is the product no signal?
• A: Try to connect the black wire of the power cable to the negative power of the reversing light rather than the ground cable.
  • Check the yellow RCA cable connecting the camera and monitor is tight, and turn the yellow RCA cable to see if the screen shows the image.
  • Check the car backup lights and make sure it can power the camera. Then run a second power line from your red wire in your dash to power the camera.
  • Check if the LED light will brighten up when you are reversing, if not, there is something wrong with the cable, please contact the after-sales service for a replacement.
• Q: What should I do if the camera was water-in and fogging?
• A: It will cause fogging issues if there is a difference in high& low temperature, just wait a few hours and it will be back to normal, otherwise, there is a temperature difference.
• Q: What should I do if there is a mirror reversal?
• A: Cut the green line, the mirror function disappears and becomes a normal image, at this time it can be as the front camera.
• Q: How can I cancel the reversing line?
• A: Just cut the small white line of the camera, the reverse line disappears,
• Q: If the screen appears uneven color, black screen, and other problems?
• A: Ensure that the screen is used normally, voltage is 12-24V. If there is still with problem when working, please contact us promptly for a free replacement camera.
• Q: If there is a problem of damaged or missing accessories?
• A: This is an accident, please contact us for a free replacement.
• Q: There is no screen to confirm the reverse car image.
• A: We are selling a separate camera that does not include a screen.That’s OK, contact us and we will send one to you.
• Q: Can the after-sales service support multiple times?
• A: Sure, if you choose eRapta, we’re passionate about providing solutions to your shopping experience, no matter what the problem is.

NOTE:

• Please tell us more details about your questions or problems.
• If you don’t mind, it would be better to attach pictures or videos.
• Please provide the Amazon order ID of the product you purchased
• All the messages will be replied to within 24 hours, please wait kindly.

Warranty

• eRapta offers a full 24-month warranty and replacement policy. We also provide lifetime technical support to ensure that you enjoy your modern backup camera for many years to come.
• To obtain warranty support, or if you are not satisfied in any way, or have any issues with your purchase, please contact us first for help, instead of return or negative content.
• We promise that you will receive the best service from us, and we will try our best to help you until your problem is solved.
• Every message will be replied to within 24 hours. Our contact email is: sales2@erapta.com, you can write it down or add it to your address book.
• Contact Email: Sales2@erapta.com.
• Contact Name: eRapta Support Department
• If you have any issues or needs, please contact us at:sales2@erapta.com.

References

• eRapta sells the best car reversing camera at a fair price – eRapta is a company focused on car camera products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>