FIBERBUILT T-Combo-10×16-cH Grass Series Combo Mat User Guide
- May 15, 2024
- FIBERBUILT
Table of Contents
FIBERBUILT T-Combo-10×16-cH Grass Series Combo Mat
Product Information
- Specifications:
- Product Name: FIBERBUILT GRASS series COMBO mat centre-hitting – 10’x16′
- Model: T-Combo-10×16-cH
Product Usage Instructions
- Preparation:
- Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed, and level. Concrete, asphalt, patios, or decking are ideal. Do not place it on grass.
- Assembly of Rubber Base:
- Place the rubber base pieces (A, B, C, D, E, F) on the ground together as shown in the manual.
- Insert Adjustable Tee (J) into the base corner with holes (D).
- Insert the cups (K) into the base corner pieces with holes (D).
- Assembly Instructions:
- Secure rubber base pieces (A, B, C, D, E, F) together by pushing 2-pin Connectors (G) for side connections and 4-pin Connectors (H) for centre connections.
- Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces.
- Laying Turf:
- Lay the Fiberbuilt Grass Panel (N), Stance Turf sections (L), and Putting Turf (M) on top of the base areas that fit their sizes.
- If turf is curled upon delivery, lay flat in the sun for a couple of hours to relax and flatten before laying on the base.
- Finished Product:
- Double the Life of Your Warranty Today for Free by registering your mat at FiberbuiltGolf.com/register with the product details.
FAQs
- Q: How do I register for an extended warranty?
- A: Visit FiberbuiltGolf.com/register. and select the FIBERBUILT GRASS series COMBO mat Center-hitting – 10’x16′ SKU#: T-combo-10×16-cH to register for a free one-year extension to the standard warranty.
Parts & assembly
- Please check your box for accuracy.
- All of these pieces should be included.
| ITEM | PART NUMBER | QTY. |
|---|---|---|
| A | TLCM-C-2 | 2 |
| B | TLCM-E-2 | 17 |
| C | TLCM-M-2 | 17 |
| D | TLCM-C-2/H | 2 |
| E | TLCM-E-FBG-CM | 1 |
| F | TLCM-M-FBG | 1 |
| G | TLCM-P-2 | 22 |
| H | TLCM-P-4 | 28 |
| I | TLCM-PINS50 | 4 Bags |
| J | 658/621-BLK | 1 |
| K | P-760CUPS | 2 |
| L | 660-TL-4.5X4 | 2 |
| M | 760-12X10-13CH | 1 |
| N | 381/40-4 | 1 |
RUBBER BASE
HARDWARE
GRASS PANELS
Assembly Instructions
- Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.) Place the rubber base pieces (A, B, C, D, E, F) on the ground together as shown.
- Insert Adjustable Tee (J) into the underside of the desired tee location on the Fiberbuilt Grass Panel (N).
- Insert the cups (K) into the base corner pieces with holes (D). The tops of the cups will extend beyond the top of the base.
- Secure rubber base pieces (A, B, C, D, E, F) together by pushing Connectors into adjacent holes in the sections.
- Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
- Steps for securing the pins:
- As you set base pieces next to each other, lift the corners of the rubber base pieces and place a plastic push pin (I) into the holes from underneath.
- From the top, push the rubber 2-pin (G) or 4-pin (H) Connectors into position, guiding them onto the plastic push pins.
- Gently tap with a hammer until the connectors are flush with the base surface.
- Lay the Fiberbuilt Grass Panel (N), Stance Turf sections (L) and Putting Turf (M) on top of the base areas that fit their sizes.
- NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten before laying them down on the base.
- NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten before laying them down on the base.
FINISH
- Double the Life of Your Warranty Today for Free
- For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at:
- FiberbuiltGolf.com/register.
- Be sure to select the following:
- FIBERBUILT GRASS series COMBO mat Center-hitting – 10’x16’
- SKU#: T-combo-10×16-cH
- FiberbuiltGolf.com.
- 833.328.3218
- FIBERBUILT GRASS series COMBO mat centre-hitting – 10’x16’ T-Combo-10×16-cH
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>