FIBERBUILT T-TBCM-10X12 Combo Mat User Guide

FIBERBUILT T-TBCM-10X12 Combo Mat

Product Information

• Specifications:
  • Product Name: PERFORMANCE TURF series COMBO mat
  • Dimensions: 10’x12′
  • Model Number: T-TBCM-10X12

Product Usage Instructions

• Preparation:
  • Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed, and level. Concrete, asphalt, patios, or decking are ideal. Do not place it on grass.
• Assembly:
  • Place the rubber base pieces (A, B, C, D) on the ground together as shown in the manual.
  • Insert the cups (H) into the base corner pieces with holes (B).
  • Secure rubber base pieces (A, B, C, D) together by pushing Connectors into adjacent holes in the sections. Use 2-Pin Connectors (E) for side connections and 4-Pin Connectors (F) for center connections.
  • Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces.
• Turf Placement:
  • Lay the Performance Turf (I) and Putting Turf (J) on top of the base areas that fit their shapes. Tuck the Putting Turf holes around the putting cups (H) to secure them.
  • If the turf is curled upon delivery, lay the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten before placing them on the base.

FAQs

• Q: How do I register my mat for an extended warranty?
  • A: To register for a free one-year extension to the standard warranty and access exclusive deals, new product information, and more, visit FiberbuiltGolf.com/register and select “PERFORMANCE TURF series COMBO mat – 10’x12′ SKU#: T-TBCM-10X12.”

Parts & assembly

• Please check your box for accuracy.
• All of these pieces should be included.

RUBBER BASE

HARDWARE

GRASS PANELS

Assembly Instructions

1. Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.) Place the rubber base pieces (A, B, C, D) on the ground together as shown.
2. Insert the cups (H) into the base corner pieces with holes (B). The tops of the cups will extend beyond the top of the base.
3. Secure rubber base pieces (A, B, C, D) together by pushing Connectors into adjacent holes in the sections.
   • Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
   • Steps for securing the pins:
   • As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (G) into the holes from underneath.
   • From the top, push the rubber 2-pin (E) and 4-pin (F) Connectors into position, guiding them onto the plastic push pins.
   • Gently tap with a hammer until the connectors are flush with the base surface.
4. Lay the Performance Turf (I) and Putting Turf (J) on top of the base areas that fit their shapes. Tuck the Putting Turf holes around the putting cups (H) to secure them.
   • NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten before laying them down on the base.

FINISH

• Double the Life of Your Warranty Today for Free
  • For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at:
  • FiberbuiltGolf.com/register.
• Be sure to select the following:
  • PERFORMANCE TURF series COMBO mat – 10’x12’
  • SKU#: T-TBCM-10X12
  • FiberbuiltGolf.com.
  • 833.328.3218
  • PERFORMANCE TURF series COMBO mat – 10’x12’ T-TBCM-10X12

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>