FIBERBUILT T-6X9-660-CH Grass Series Studio Golf Mat User Guide
- May 15, 2024
- FIBERBUILT
Table of Contents
FIBERBUILT T-6X9-660-CH Grass Series Studio Golf Mat
Specifications :
- Product Name: FIBERBUILT GRASS series studio mat Center-hitting – 9’x6′
- Model Number: T-6×9-660-ch
- Dimensions: 9’x6′
- Parts Included: Rubber base pieces (A, B, C, D, E), Connectors (2-Pin and 4-Pin), Pins, Adjustable Tee, Grass Panels
Product Usage Instructions
Preparation:
- Ensure the ground is firm, packed, and level (concrete, asphalt, patios, or decking).
- Avoid placing on grass.
Assembly:
- Place rubber base pieces (A, B, C, D, E) on the ground according to the provided layout.
- Lay the Fiberbuilt Grass Panel (K) and Stance Turf sections (J) on top of the base areas that fit their sizes.
- Secure rubber base pieces together using Connectors (2-Pin for side connections, 4-Pin for center connections).
- Optional: Secure Connectors with pins for increased stability.
Finishing:
Insert the Adjustable Tee (I) into the desired tee location on the
Fiberbuilt Grass Panel (K).
Additional Information:
If the turf pieces are curled upon delivery, lay them flat in the sun for a
couple of hours to relax and flatten before assembly.
FAQ:
-
Q: How should I prepare the ground for the mat?
A: Ensure the ground is firm, packed, and level. Avoid placing the mat on grass. -
Q: How do I secure the rubber base pieces together?
A: Use Connectors – 2-Pin for side connections and 4-Pin for center connections. Optionally, secure Connectors with pins for increased stability.
Parts & assembly
Please check your box for accuracy.
All of these pieces should be included.
RUBBER BASE
HARDWARE
GRASS PANELS
Instructions
-
Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level.
Concrete, asphalt, patios or decking are ideal. (Do not place on grass.)
Place the rubber base pieces (A, B, C, D, E) on the ground together as shown. -
Secure rubber base pieces (A, B, C, D, E) together by pushing Connectors into adjacent holes in the sections.
Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
Steps for securing the pins:- As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (H) into the holes from underneath.
- From the top, push the rubber 2-pin (F) or 4-pin (G) Connectors into position, guiding them onto the plastic push pins.
- Gently tap with a hammer until the connectors are flush with the base surface.
-
Lay the Fiberbuilt Grass Panel (K) and Stance Turf sections (J) on top of the base areas that fit their sizes. NOTE : We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten prior to laying them down on the base.
-
Insert Adjustable Tee (I) into the underside of the desired tee location on the Fiberbuilt Grass Panel (K).
Finished Product
Warranty
Double the Life of Your Warranty Today for Free
For a free one-year extension to our standard warranty, exclusive access to
insider deals, new product information and much more, register your mat today
at: FiberbuiltGolf.com/register
Be sure to select the following:
FIBERBUILT GRASS series studio mat Center-hitting – 9’x6’
SKU#: T-6X9-660-ch
FiberbuiltGolf.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>