FIBERBUILT T-Combo-10×10-dH Grass Series Combo Mat System User Guide

FIBERBUILT T-Combo-10×10-dH Grass Series Combo Mat System

Product Information

• Specifications
  • Product Name: FIBERBUILT GRASS series COMBO mat double-hitting – 10’x10′
  • Model Number: T-Combo-10×10-dH
  • Dimensions: 10’x10′

The FIBERBUILT GRASS series COMBO mat is designed to provide a durable and versatile golf practice surface for indoor or outdoor use. The set includes rubber base pieces, grass panels, turf sections, pins, and connectors for easy assembly and setup.

Product Usage Instructions

• Preparation
  • Ensure the ground is firm, packed, and level.
  • Avoid placing the mat on grass; concrete, asphalt, patios, or decking are ideal surfaces.
• Assembly
  • Place rubber base pieces (A-G) on the ground as instructed in the manual.
  • Insert Adjustable Tees (K) and cups (L) into their designated locations on the base pieces.
  • Secure rubber base pieces together using 2-Pin Connectors (H) for side connections and 4-Pin Connectors (I) for centre connections.
  • If desired, use pins for increased stability during assembly.
• Turf Placement
  • Lay out the grass panels and turf sections on top of the assembled base pieces according to their sizes. Allow any curled turf pieces to relax and flatten before use.
• Final Steps
  • Once assembled, the FIBERBUILT GRASS series COMBO mat is ready for use as a reliable golf practice surface.

FAQs

• Q: Can the mat be used outdoors?
  • A: Yes, the mat can be used outdoors on firm and level surfaces such as concrete, asphalt, patios, or decking.
• Q: How should I store the mat when not in use?
  • A: It is recommended to disassemble the mat if not in use for an extended period and store it in a dry and covered area to prolong its lifespan.
• Q: How do I clean the glass panels?
  • A: Use a mild soap and water solution with a soft brush to gently clean the grass panels. Avoid using harsh chemicals or abrasive materials that may damage the surface.

Parts & assembly

Please check your box for accuracy. All of these pieces should be included.

RUBBER BASE

HARDWARE

GRASS PANELS

Assembly Instructions

1. Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.) Place the rubber base pieces (A, B, C, D, E, F, G) on the ground together as shown.
2. Insert Adjustable Tees (K) into the underside of the desired tee locations on the Fiberbuilt Grass Panels (P).
   • Insert the cups (L) into the base edge pieces with holes (E). The tops of the cups will extend beyond the top of the base.
3. Secure rubber base pieces (A, B, C, D, E, F, G) together by pushing Connectors into adjacent holes in the sections.
   • Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
   • Steps for securing the pins:
   • As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (J) into the holes from underneath.
   • From the top, push the rubber 2-pin (H) or 4-pin (I) Connectors into position, guiding them onto the plastic push pins.
   • Gently tap with a hammer until the connectors are flush with the base surface.
4. Lay the Fiberbuilt Grass Panels (P), Spacer Turf sections (M), Stance Turf (N), and Putting Turf (O) on top of the base areas that fit their sizes.
   • NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten before laying them down on the base.

FINISH

• Double the Life of Your Warranty Today for Free
  • For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at:
  • FiberbuiltGolf.com/register.
• Be sure to select the following:
  • FIBERBUILT GRASS series COMBO mat
  • Double-hitting – 10’x10’
  • SKU#: T-combo-10×10-dH
  • FiberbuiltGolf.com.
  • 833.328.3218

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>