FIBERBUILT T-4X10-660-DH Grass Series Studio Golf Mat User Guide
- May 15, 2024
- FIBERBUILT
Table of Contents
FIBERBUILT T-4X10-660-DH Grass Series Studio Golf Mat
Specifications:
- Product Name: FIBERBUILT GRASS series studio mat DOUBLE-hitting
- Size: 10’x4′
- Model Number: T-4X10-660-DH
Product Usage Instructions
Parts & Assembly:
Check the box for all included parts:
| ITEM | PART NUMBER | QTY. |
|---|---|---|
| A – J | TLCM-C-2, TLCM-E-2, TLCM-E-FBG-TL4, TLCM-P-2, TLCM-P-4, | |
| TLCM-PINS50, 658/621-BLK, 660-TL-2X4, 660-TL-4X4, 381/40-4 | As per requirement |
Assembly Steps:
- Prepare the ground surface to be firm, packed, and level.
- Place rubber base pieces (A, B, C) on the ground as instructed.
- Lay Grass Panels (J), Spacer Turf sections (H), and Stance Turf (I) on top of the base areas that fit their sizes.
- Secure rubber base pieces together using 2-Pin Connectors (D) for side connections and 4-Pin Connectors (E) for center connections.
- Optional Step: Secure Connectors with pins for increased stability.
- Insert Adjustable Tees (G) into the desired tee locations on the Grass Panels (J).
Additional Information:
If turf pieces are curled upon delivery, lay them flat in the sun for a
couple of hours to relax and flatten before laying them down.
FAQ:
- Q: How can I extend the warranty for the product?
A: To extend the warranty for an additional year for free, register your mat at FiberbuiltGolf.com/register and select the product SKU#: T-4X10-660-DH.
Parts & assembly
Please check your box for accuracy. All of these pieces should be
included.
RUBBER BASE
HARDWARE
GRASS PANELS
ASSEMBLY INSTRUCTIONS
-
Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.)
Place the rubber base pieces (A, B, C) on the ground together as shown.
-
Secure rubber base pieces (A, B, C) together by pushing Connectors into adjacent holes in the sections.
Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
Steps for securing the pins:- As you set base pieces next to each other lift up the corners of the rubber base pieces and place a plastic push pin (F) into the holes from underneath.
- From the top, push the rubber 2-pin (D) or 4-pin (E) Connectors into position, guiding them onto the plastic push pins.
- Gently tap with a hammer until the connectors are flush with the base surface.
-
Lay the Fiberbuilt Grass Panels (J), Spacer Turf sections (H) and Stance Turf
(I) on top of the base areas that fit their sizes. NOTE : We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten prior to laying them down on the base. -
Insert Adjustable Tees (G) into the underside of the desired tee locations on the Fiberbuilt Grass Panels (J).
Finished Product
Warranty
Double the Life of Your Warranty Today for Free
For a free one-year extension to our standard warranty, exclusive access to
insider deals, new product information and much more, register your mat today
at: FiberbuiltGolf.com/register
Be sure to select the following:
FIBERBUILT GRASS series studio mat DOUBLE-hitting – 10’x4’
SKU#: T-4X10-660-DH
FiberbuiltGolf.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>