FIBERBUILT T-6X7-660-SH Grass Series Studio Golf Mat User Manual
- May 15, 2024
- FIBERBUILT
Table of Contents
FIBERBUILT T-6X7-660-SH Grass Series Studio Golf Mat
Specifications:
- Product Name: FIBERBUILT GRASS series studio mat single-hitting – 7’x6′
- Model Number: T-6×7-660-sh
- Dimensions: 7’x6′
Product Usage Instructions
Preparation:
Ensure the ground is properly prepared for placement of the rubber base.
The surface should be firm, packed, and level. Concrete, asphalt, patios, or
decking are ideal surfaces for setup. Do not place the mat on grass.
Assembling the Base:
- Place rubber base pieces (A, B, C, D, E) on the ground according to the provided layout.
- Lay Fiberbuilt Grass Panel (L), Spacer Turf (J), and Stance Turf (K) on top of the corresponding base areas.
- If turf pieces are curled upon delivery, lay them flat in the sun for a couple of hours to relax and flatten before placing them on the base.
Assembly Instructions:
- Secure rubber base pieces (A, B, C, D, E) together using 2-Pin Connectors (F) for side connections and 4-Pin Connectors (G) forcenter connections.
- For increased stability, you can install and secure connectors with pins from underneath as you assemble the base. Skip using pins if regular moving or disassembling is anticipated.
Completing Assembly:
Insert Adjustable Tee (I) into the desired tee location on the Fiberbuilt
Grass Panel (L) for finishing the assembly.
FAQ:
- Q: How can I extend the warranty of my mat?
A: To double the warranty length for free and gain access to exclusive deals and product information, register your mat at FiberbuiltGolf.com/register with the SKU#: T-6X7-660-sh.
Parts & assembly
Please check your box for accuracy. All of these pieces should be included.
RUBBER BASE
HARDWARE
GRASS PANELS
Instructions
-
Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level.
Concrete, asphalt, patios or decking are ideal. (Do not place on grass.)
Place the rubber base pieces (A, B, C, D, E) on the ground together as shown.
-
Secure rubber base pieces (A, B, C, D, E) together by pushing Connectors into adjacent holes in the sections.
Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
Steps for securing the pins:- As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (H) into the holes from underneath.
- From the top, push the rubber 2-pin (F) or 4-pin (G) Connectors into position, guiding them onto the plastic push pins.
- Gently tap with a hammer until the connectors are flush with the base surface.
-
Lay the Fiberbuilt Grass Panel (L), Spacer Turf (J) and Stance Turf (K) on top of the base areas that fit their sizes. NOTE : We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten prior to laying them down on the base.
-
Insert Adjustable Tee (I) into the underside of the desired tee location on the Fiberbuilt Grass Panel (L).
Finished Product
Warranty
Double the Life of Your Warranty Today for Free
For a free one-year extension to our standard warranty, exclusive access to
insider deals, new product information and much more, register your mat today
at: FiberbuiltGolf.com/register
Be sure to select the following:
FIBERBUILT GRASS series studio mat SinglE-hitting – 7’x6’
SKU#: T-6X7-660-sH
FiberbuiltGolf.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>