FIBERBUILT T-Combo-10×12-dH Grass Series Combo Mat User Guide

FIBERBUILT T-Combo-10×12-dH Grass Series Combo Mat User Guide

Parts & assembly

Please check your box for accuracy.
All of these pieces should be included.

RUBBER BASE

• A 1’x1’ Corner (x4)

• B 1’x1’ Edge (x20)

• C 2’x2’ Edge (x4)

• D 2’x2’ Middle  (x14)

• E 2’x2’ Edge With Hole (x2)

• F 2’x2’ Grass Panel Edge

• G 2’x2’ Grass Panel Middle (x2)

HARDWARE

• H 2-Pin Connector (x44)

• I 4-Pin Connector (x25)

• J Pins (x5 Bags)

• K Adjustable Tee (x2)

• L Putting Cup (x2)

GRASS PANEL

• 1.5’x4’ Spacer Turf (x2)

• N 5’x4’ Stance Turf (x1)

• O 10’x8’ Putting Turf (x1)
  

• P 1’x4’ Fiberbuilt Grass Panel
  

Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.)

Place the rubber base pieces (A, B, C, D, E, F, G) on the ground together as shown.

Insert Adjustable Tees (K) into the underside of the desired tee locations on the Fiber built Grass Panels (P).

Insert the cups (L) all the way into the base edge pieces with holes (E).
The tops of the cups will extend beyond the top of the base.

Assembly Instructions

Secure rubber base pieces (A, B, C, D, E, F, G) together by pushing Connectors into adjacent holes in the sections.

2-Pin Connectors (H) for side connections

4-Pin Connectors (I) for center connections.

Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)

Steps for securing the pins:

• As you set base pieces next to each other, lift up the corners of the rubber base  pieces and place a plastic push pin (J) into the holes from underneath.
• From the top, push the rubber 2-pin (H) or 4-pin (I) Connectors into position, guiding them onto the plastic push pins.
• Gently tap with a hammer until the connectors are flush with the base surface.

Lay the Fiberbuilt Grass Panels (P), Spacer Turf (M) sections, Stance Turf (N), and Putting Turf (O) on top of the base areas that fit their sizes.

Finished Product

Double the Life of Your Warranty Today for Free

For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at:

FiberbuiltGolf.com/register

Be sure to select the following:

FIBERBUILT GRASS series COMBO mat Double-hitting – 10’x12’
SKU#: T -combo-10×12-dH

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>