RETLUX RXL 467 Led Christmas Decorations Instruction Manual

RETLUX RXL 467 Led Christmas Decorations

Product Information

Product Name: RXL 467 LED Christmas Decorations
Model: RXL 467 Country Codes: CZ, SK, HU, PL, EN, DE, RS, HR, EL

Product Usage Instructions

1. Safety Precautions:
   • This product is designed for indoor use only.
   • It has a protection class of IP20, which means it is protected against solid objects larger than 12.5mm and does not provide protection against water.
   • Do not expose the product to mechanical damage, hot surfaces, or sharp objects.
   • Read the manual carefully before using the product.
   • Follow all safety instructions provided in the manual.
2. Package Content:
   • Check the package contents to ensure everything is included as per the manual.
3. Technical Specifications:
   • The product is equipped with control gear for operation.
   • Make sure to use the appropriate type of socket for the control gear when using an extension cable.
   • The O-ring seal should be checked before using the control gear.
   • Connect the cable connector of the product to the socket in the control gear and secure it by tightening the threaded connection.
   • Plug the control gear into an AC outlet to power on the decorations. The lights will automatically turn on.
   • Pulling the control gear socket will automatically turn off the lights and remain off for 18 hours. After 18 hours, the control gear will turn on again for 6 hours before automatically turning off for another 18 hours. This cycle will repeat.
4. Maintenance and Cleaning:
   • Regularly clean and maintain the product according to the instructions provided in the manual.
   • Do not dispose of the product with municipal waste.

Follow proper disposal methods for electrical and electronic waste.
Note: The information provided is based on the given text extract from the user manual. For more detailed instructions and safety information, please refer to the complete user manual provided with the product.
Pay attention to warning note when putting the product into operation to avoid damage to health or property.

• Do not connect the light to the power supply when it is still packaged.
• Light sources cannot be replaced.
• The electric cable cannot be repaired.
• This product is not a toy, please keep it out of reach of children.
• Use only the control gear included with the product.
• Do not electrically connect the decoration to other sets of lights.
• If the light source is damaged, there is a risk of electric shock. In this case, do not use the product, do not leave it connected to electricity, but dispose of it safely.
• The decoration is suitable for indoor and outdoor use.
• Make sure that the decoration and control gear are not damaged in any way before you plug the ballast into the wall socket.

WARRANTY LIMITATIONS
Any damage to the product due to failure to follow the instructions in this manual is excluded from the warranty. The manufacturer/importer does not assume responsibility for damages that may result from failure to follow instructions in the manual, unprofessional repairs and unauthorized changes. Protect the cable from sharp objects, mechanical damage and hot surfaces.

PACKAGE CONTENT

• LED decoration RXL 467.
• Control gear.
• Operating manual.

TECHNICAL SPECIFICATIONS
Control gear:

• Input voltage: 220–240 V, 50/60 Hz, Protection class: II
• Output voltage: 31 V, 3,6 W

START-UP

If an extension cable is used, it is essential to use a cable with the appropriate type of socket with respect to the design of the control gear.

1. Check the O-ring seal. Do not use the control gear without gasket.
2. Insert the cable connector of the product into the socket in the control gear and and secure by tightening the threaded
3. Connect the control gear plug in the AC outlet. The decoration lights up automatically. Pulling the control gear
4. The RXL 467 light decoration has a “timer” function, its control is in the form of a button on the the control gear.
   • After the first pressing of the button, the decoration will still be lit.
   • When the button is pressed a second time (the button turns green), the timer is set for 6 hours. After that, the control gear automatically switches off and remains so for 18 hours. At these intervals (6 hours on / 18 hours off), the control gear will work automatically until you switch it off with the third switch.

MAINTENANCE, CLEANING

• To prevent electric shock, do not expose the product to dripping or splashing water or other liquid, do not immerse the product in water or any other liquid.
• Use for cleaning only a dry and soft sponge. Do not use for cleaning any solvents, gasoline, benzene or any similar cleaners. The product might be damaged.

USED SYMBOLS

• The product meets EU requirements.
• Only for indoor use. Use only in interiors. IP20
• The product is classified as an electrical appliance subject to the Directive on electrical and electronic equipment waste. Do not dispose of it in municipal waste.
• Protection class CLASS II

Text, design and parameters are subject to change without notice.
Manufacturer: FAST CR, a. s., U Sanitasu 1621, 251 01 Ricany, Czech Republic – Czech is the original version

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>