THUMPER FAB TF040904 Can Am Defender Cell Phone Charging Mount Installation Guide
- June 12, 2024
- THUMPER FAB
Table of Contents
- THUMPER FAB TF040904 Can Am Defender Cell Phone Charging Mount
- Product Information
- Product Usage Instructions
- Cell Phone Mount Installation
- TOOLS
- INSTALLATION INSTRUCTIONS
- 6-32 x 1” socket cap screws (B) 3 X #6-32 Nylon Insert Lock Nut (C) 3 X #6
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
- 3 Phillips Head Bit
THUMPER FAB TF040904 Can Am Defender Cell Phone Charging Mount
Product Information
Product Name | Can-Am Defender Cell Phone Charging Mount |
---|---|
SKU | TF040904 |
Manufacturer | Thumper Fab |
Manufacturer Address | 5103 Elysian Fields Rd, Marshall, TX 75672 |
Customer Service | 903-472-0928 |
Website | www.thumperfab.com |
Version | 0522 |
Product Usage Instructions
- Install the wireless phone charger mount to the dash mounting plate.
- Run the phone charger wires through the center hole of the mounting plate.
- Using three #6-32 x 1 socket cap screws (B), attach the wireless phone charger (2) to the dash mounting plate (1) (refer to FIG 1).
- Fasten the wireless phone charger (2) and dash mount plate (1) to the dash using a drill and five #14 x 3/4 truss head Phillips screws (A) (be careful not to over tighten) (refer to FIG 2).
- Drill a hole using a 1/2 drill bit and run the wires through the hole.
- Refer to the wiring instructions inside the wireless phone charger box for further guidance.
FIG 1 – Fasten Wireless Phone Charger to Dash Mount Plate using 1/8 Allen Wrench and 5/16 WrenchFIG 2 – Fasten Dash Mount Plate to dash using Drill
Can-Am Defender
Cell Phone Charging Mount
SKU: TF040904
Cell Phone Mount Installation
PARTS
TOOLS
- Drill
- 1/2” Drill Bit
-
3 Phillips Head Bit
- 1/8” Allen Wrench
- 5/16” Wrench
BEFORE YOU BEGIN
If you do not feel comfortable installing your Thumper Fab Cell Phone Charging Mount, please see your nearest Can-Am® Dealer for installation.
INSTALLATION INSTRUCTIONS
Install Wireless Phone Charger Mount to Dash Mounting Plate
Run phone charger wires through center hole of mounting plate and use 3 X
6-32 x 1” socket cap screws (B) 3 X #6-32 Nylon Insert Lock Nut (C) 3 X #6
Washers (D) to fasten wireless phone charger (2) to the dash mounting plate
(1) (FIG 1).Drill hole using 1/2”
drill bit & run wires through hole. Fasten wireless phone charger (2) and dash
mount plate (1) to dash, using a drill and 5 X #14 x 3/4” truss head phillips
screws (A), careful not to over tighten. Refer to wiring instruction inside
wireless phone charger box. (FIG 2). Thumper Fab
5103 Elysian Fields Rd, Marshall, Tx 75672
Customer Service: 903-472-0928
www.thumperfab.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>